X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5253DEMO.h;h=840d3b4672e64263d6e948ee0313da67f3ec7bca;hb=284c1a9b4b91120385c346a1924628a695314905;hp=e9a7922921933926879b124e14110db798049c9d;hpb=2ffa0e87df3a7595f71d05782924ee83146d9fe7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index e9a7922..840d3b4 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -8,12 +8,8 @@
 
 #include <linux/stringify.h>
 
-#define CONFIG_MCFTMR
-
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG		/* disable watchdog */
-
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
@@ -23,26 +19,6 @@
 	. = DEFINED(env_offset) ? env_offset : .; \
 	env/embedded.o(.text*);
 
-#ifdef CONFIG_IDE
-/* ATA */
-#	define CONFIG_IDE_RESET		1
-#	define CONFIG_IDE_PREINIT	1
-#	define CONFIG_ATAPI
-#	undef CONFIG_LBA48
-
-#	define CONFIG_SYS_IDE_MAXBUS		1
-#	define CONFIG_SYS_IDE_MAXDEVICE	2
-
-#	define CONFIG_SYS_ATA_BASE_ADDR	(CONFIG_SYS_MBAR2 + 0x800)
-#	define CONFIG_SYS_ATA_IDE0_OFFSET	0
-
-#	define CONFIG_SYS_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O */
-#	define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
-#	define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
-#	define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers */
-#endif
-
-#define CONFIG_DRIVER_DM9000
 #ifdef CONFIG_DRIVER_DM9000
 #	define CONFIG_DM9000_BASE	(CONFIG_SYS_CS1_BASE | 0x300)
 #	define DM9000_IO		CONFIG_DM9000_BASE
@@ -69,7 +45,6 @@
 #define CONFIG_HOSTNAME		"M5253DEMO"
 
 /* I2C */
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(*(u32 *) (CONFIG_SYS_MBAR+0x19C))
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFFFE7FF)
 #define CONFIG_SYS_I2C_PINMUX_SET	(0)
@@ -98,8 +73,6 @@
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x10000	/* Size of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
@@ -109,14 +82,7 @@
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
 
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#	define CONFIG_SYS_MONITOR_BASE	0x20000
-#else
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN		0x40000
-#define CONFIG_SYS_BOOTPARAMS_LEN	(64*1024)
 
 /*
  * For booting Linux, the board info and command line data
@@ -128,7 +94,6 @@
 
 /* FLASH organization */
 #define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	2048	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
@@ -142,7 +107,6 @@
  * 0x30 is block erase in SST
  */
 #	define CONFIG_SYS_FLASH_SIZE		0x800000
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #	define CONFIG_FLASH_CFI_LEGACY
 #else
 #	define CONFIG_SYS_SST_SECT		2048