X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5253DEMO.h;h=3a5c12faa46f9988aeb24f47af989d502186191d;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=8d9bfa3dd09beb6b5f81e010f2dc99f9981e5a30;hpb=71edc271816ec82cf0550dd6980be2da3cc2ad9e;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 8d9bfa3..3a5c12f 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -31,9 +31,9 @@ #define CONFIG_MCFTMR #define CONFIG_MCFUART -#define CFG_UART_PORT (0) +#define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ @@ -47,7 +47,7 @@ # define CONFIG_ENV_SECT_SIZE 0x1000 # define CONFIG_ENV_IS_IN_FLASH 1 #else -# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000) # define CONFIG_ENV_SECT_SIZE 0x1000 # define CONFIG_ENV_IS_IN_FLASH 1 #endif @@ -75,22 +75,22 @@ # define CONFIG_ATAPI # undef CONFIG_LBA48 -# define CFG_IDE_MAXBUS 1 -# define CFG_IDE_MAXDEVICE 2 +# define CONFIG_SYS_IDE_MAXBUS 1 +# define CONFIG_SYS_IDE_MAXDEVICE 2 -# define CFG_ATA_BASE_ADDR (CFG_MBAR2 + 0x800) -# define CFG_ATA_IDE0_OFFSET 0 +# define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800) +# define CONFIG_SYS_ATA_IDE0_OFFSET 0 -# define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ -# define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ -# define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ -# define CFG_ATA_STRIDE 4 /* Interval between registers */ +# define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +# define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +# define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +# define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ # define _IO_BASE 0 #endif #define CONFIG_DRIVER_DM9000 #ifdef CONFIG_DRIVER_DM9000 -# define CONFIG_DM9000_BASE ((CFG_CSAR1 << 16) | 0x300) +# define CONFIG_DM9000_BASE ((CONFIG_SYS_CSAR1 << 16) | 0x300) # define DM9000_IO CONFIG_DM9000_BASE # define DM9000_DATA (CONFIG_DM9000_BASE + 4) # undef CONFIG_DM9000_DEBUG @@ -104,7 +104,7 @@ # define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \ + "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \ "loadaddr=10000\0" \ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ @@ -121,41 +121,41 @@ /* I2C */ #define CONFIG_FSL_I2C #define CONFIG_HARD_I2C /* I2C with hw support */ -#define CFG_I2C_SPEED 80000 -#define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_OFFSET 0x00000280 -#define CFG_IMMR CFG_MBAR -#define CFG_I2C_PINMUX_REG (*(u32 *) (CFG_MBAR+0x19C)) -#define CFG_I2C_PINMUX_CLR (0xFFFFE7FF) -#define CFG_I2C_PINMUX_SET (0) +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x00000280 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR +#define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C)) +#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) +#define CONFIG_SYS_I2C_PINMUX_SET (0) -#define CFG_PROMPT "=> " -#define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00100000 +#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CFG_MEMTEST_START 0x400 -#define CFG_MEMTEST_END 0x380000 +#define CONFIG_SYS_MEMTEST_START 0x400 +#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CFG_HZ 1000 +#define CONFIG_SYS_HZ 1000 -#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ -#define CFG_FAST_CLK -#ifdef CFG_FAST_CLK -# define CFG_PLLCR 0x1243E054 -# define CFG_CLK 140000000 +#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ +#define CONFIG_SYS_FAST_CLK +#ifdef CONFIG_SYS_FAST_CLK +# define CONFIG_SYS_PLLCR 0x1243E054 +# define CONFIG_SYS_CLK 140000000 #else -# define CFG_PLLCR 0x135a4140 -# define CFG_CLK 70000000 +# define CONFIG_SYS_PLLCR 0x135a4140 +# define CONFIG_SYS_CLK 70000000 #endif /* @@ -164,100 +164,100 @@ * You should know what you are doing if you make changes here. */ -#define CFG_MBAR 0x10000000 /* Register Base Addrs */ -#define CFG_MBAR2 0x80000000 /* Module Base Addrs 2 */ +#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ +#define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */ /* * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 +#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ #ifdef CONFIG_MONITOR_IS_IN_RAM -# define CFG_MONITOR_BASE 0x20000 +# define CONFIG_SYS_MONITOR_BASE 0x20000 #else -# define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) #endif -#define CFG_MONITOR_LEN 0x40000 -#define CFG_MALLOC_LEN (256 << 10) -#define CFG_BOOTPARAMS_LEN (64*1024) +#define CONFIG_SYS_MONITOR_LEN 0x40000 +#define CONFIG_SYS_MALLOC_LEN (256 << 10) +#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CFG_FLASH_BASE (CFG_CSAR0 << 16) -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 1000 +#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CSAR0 << 16) +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 #define FLASH_SST6401B 0x200 #define SST_ID_xF6401B 0x236D236D -#undef CFG_FLASH_CFI -#ifdef CFG_FLASH_CFI +#undef CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI /* * Unable to use CFI driver, due to incompatible sector erase command by SST. * Amd/Atmel use 0x30 for sector erase, SST use 0x50. * 0x30 is block erase in SST */ # define CONFIG_FLASH_CFI_DRIVER 1 -# define CFG_FLASH_SIZE 0x800000 -# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CONFIG_SYS_FLASH_SIZE 0x800000 +# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_FLASH_CFI_LEGACY #else -# define CFG_SST_SECT 2048 -# define CFG_SST_SECTSZ 0x1000 -# define CFG_FLASH_WRITE_TOUT 500 +# define CONFIG_SYS_SST_SECT 2048 +# define CONFIG_SYS_SST_SECTSZ 0x1000 +# define CONFIG_SYS_FLASH_WRITE_TOUT 500 #endif /* Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 +#define CONFIG_SYS_CACHELINE_SIZE 16 /* Port configuration */ -#define CFG_FECI2C 0xF0 +#define CONFIG_SYS_FECI2C 0xF0 -#define CFG_CSAR0 0xFF80 -#define CFG_CSMR0 0x007F0021 -#define CFG_CSCR0 0x1D80 +#define CONFIG_SYS_CSAR0 0xFF80 +#define CONFIG_SYS_CSMR0 0x007F0021 +#define CONFIG_SYS_CSCR0 0x1D80 -#define CFG_CSAR1 0xE000 -#define CFG_CSMR1 0x00000001 -#define CFG_CSCR1 0x3DD8 +#define CONFIG_SYS_CSAR1 0xE000 +#define CONFIG_SYS_CSMR1 0x00000001 +#define CONFIG_SYS_CSCR1 0x3DD8 -#define CFG_CSAR2 0 -#define CFG_CSMR2 0 -#define CFG_CSCR2 0 +#define CONFIG_SYS_CSAR2 0 +#define CONFIG_SYS_CSMR2 0 +#define CONFIG_SYS_CSCR2 0 -#define CFG_CSAR3 0 -#define CFG_CSMR3 0 -#define CFG_CSCR3 0 +#define CONFIG_SYS_CSAR3 0 +#define CONFIG_SYS_CSMR3 0 +#define CONFIG_SYS_CSCR3 0 /*----------------------------------------------------------------------- * Port configuration */ -#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ -#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ -#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ -#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ -#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ -#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ -#define CFG_GPIO1_LED 0x00400000 /* user led */ +#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ +#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ #endif /* _M5253DEMO_H */