X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5235EVB.h;h=25f784e39807a7f49b0fed79cba5e999d82cc6ad;hb=a958c58571ef2af420f482f47a34924d75510065;hp=3c56cec425c4d3b6e8f6bedc5d6b85ef4197e29b;hpb=4b19b89ca4a866b7baa642533e6dbd67cd832d27;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 3c56cec..25f784e 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -18,27 +18,15 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
 #	define CONFIG_SYS_RX_ETH_BUFFER	8
 #	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#	define CONFIG_SYS_FEC0_PINMUX		0
-#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
-#	define MCFFEC_TOUT_LOOP		50000
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
@@ -52,21 +40,13 @@
 
 /* Timer */
 #define CONFIG_MCFTMR
-#undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_i2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(gpio->par_qspi)
 #define CONFIG_SYS_I2C_PINMUX_CLR	~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
 #define CONFIG_SYS_I2C_PINMUX_SET	(GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#define CONFIG_BOOTFILE		"u-boot.bin"
+/* this must be included AFTER the definition of CONFIG COMMANDS (if any) */
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_IPADDR	192.162.1.2
 #	define CONFIG_NETMASK	255.255.255.0
@@ -89,8 +69,6 @@
 
 #define CONFIG_PRAM		512	/* 512 KB */
 
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE+0x20000)
-
 #define CONFIG_SYS_CLK			75000000
 #define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 2
 
@@ -118,14 +96,10 @@
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
 
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
-#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
-
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -146,7 +120,6 @@
 #else
 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #endif
-#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
 #endif
 
@@ -163,7 +136,6 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)