X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM52277EVB.h;h=83d774527adcfc6ad39d621990d31a98f3da1925;hb=d01806a8fcbdaedcc67cead56ece572021d97ab7;hp=ffee2250bb5bae17c2805391e9280fac68565fb9;hpb=a726075911c231e81ecbe12825840b6183bc10da;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index ffee225..83d7745 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Configuation settings for the Freescale MCF52277 EVB board. * * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -18,11 +17,9 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_M52277EVB /* M52277EVB board */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 115200 #undef CONFIG_WATCHDOG @@ -32,22 +29,8 @@ * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* Command line configuration */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_BMP -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF - -#define CONFIG_HOSTNAME M52277EVB + +#define CONFIG_HOSTNAME "M52277EVB" #define CONFIG_SYS_UBOOT_END 0x3FFFF #define CONFIG_SYS_LOAD_ADDR2 0x40010007 #ifdef CONFIG_SYS_STMICRO_BOOT @@ -87,10 +70,8 @@ "" #endif -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ /* LCD */ #ifdef CONFIG_CMD_BMP -#define CONFIG_LCD #define CONFIG_SPLASH_SCREEN #define CONFIG_LCD_LOGO #define CONFIG_SHARP_LQ035Q7DH06 @@ -98,11 +79,6 @@ /* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION #define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000 #define CONFIG_SYS_USB_EHCI_CPU_INIT #endif @@ -125,13 +101,10 @@ #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* DSPI and Serial Flash */ -#define CONFIG_CF_SPI #define CONFIG_CF_DSPI -#define CONFIG_HARD_SPI #define CONFIG_SYS_SBFHDR_SIZE 0x7 #ifdef CONFIG_CMD_SPI # define CONFIG_SYS_DSPI_CS2 -# define CONFIG_SPI_FLASH_STMICRO # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ DSPI_CTAR_PCSSCK_1CLK | \ @@ -149,17 +122,6 @@ #define CONFIG_PRAM 2048 /* 2048 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) #define CONFIG_SYS_MBAR 0xFC000000 @@ -216,10 +178,7 @@ * crc error warning if there is no correct environment on the flash. */ #ifdef CONFIG_CF_SBF -# define CONFIG_ENV_IS_IN_SPI_FLASH # define CONFIG_ENV_SPI_CS 2 -#else -# define CONFIG_ENV_IS_IN_FLASH 1 #endif #define CONFIG_ENV_OVERWRITE 1 @@ -241,16 +200,12 @@ # define CONFIG_ENV_SECT_SIZE 0x8000 #endif -#define CONFIG_SYS_FLASH_CFI #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_FLASH_CFI_DRIVER 1 -# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 # define CONFIG_FLASH_SPANSION_S29WS_N 1 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ # define CONFIG_SYS_FLASH_CHECKSUM # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } #endif