X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FIceCube.h;h=3a347eac55e51c08f46fd9bdfe49065472873993;hb=5a7ddf4e1fb9347f783eb1473c30187d7a22bd81;hp=598811240a7ffe4f7359243e261d30f369fdc839;hpb=bd38b7ecfdf01e0b7bce551a0834226630be81c1;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 5988112..3a347ea 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -37,10 +37,7 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
  * Serial console configuration
@@ -61,6 +58,7 @@
 #if defined(CONFIG_PCI)
 #define CONFIG_PCI_PNP		1
 #define CONFIG_PCI_SCAN_SHOW	1
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 
 #define CONFIG_PCI_MEM_BUS	0x40000000
 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
@@ -69,7 +67,6 @@
 #define CONFIG_PCI_IO_BUS	0x50000000
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
-#define ADD_PCI_CMD 		CFG_CMD_PCI
 #endif
 
 #define CFG_XLB_PIPELINING	1
@@ -80,11 +77,8 @@
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#else	/* MPC5100 */
-
+#else
 #define CONFIG_MII		1
-#define ADD_PCI_CMD		0  /* no CFG_CMD_PCI */
-
 #endif
 
 /* Partitions */
@@ -93,31 +87,44 @@
 #define CONFIG_ISO_PARTITION
 
 /* USB */
-#if 1
-#define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD             0
-#endif
+#define CFG_OHCI_BE_CONTROLLER
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
+
 /*
- * Supported commands
+ * BOOTP options
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_SNTP	| \
-				ADD_PCI_CMD	| \
-				ADD_USB_CMD	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT	        1
@@ -138,7 +145,7 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
@@ -167,19 +174,16 @@
  * IPB Bus clocking configuration.
  */
 #if defined(CONFIG_LITE5200B)
-#define CFG_IPBSPEED_133 	/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK	/* define for 133MHz speed */
 #else
-#undef CFG_IPBSPEED_133   	/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 #endif /* CONFIG_MPC5200 */
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE	8192
-
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
@@ -312,7 +316,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -328,6 +332,11 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */