X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FIceCube.h;h=3a347eac55e51c08f46fd9bdfe49065472873993;hb=1a247ba7fa5fb09f56892a09a990f03ce564b3e2;hp=1a7167b481cd0a98f824f7892ccab3206a9c7135;hpb=3a82d5915498fe1c347de38d30323853e54f50df;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 1a7167b..3a347ea 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -37,6 +37,8 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
+
 /*
  * Serial console configuration
  */
@@ -56,6 +58,7 @@
 #if defined(CONFIG_PCI)
 #define CONFIG_PCI_PNP		1
 #define CONFIG_PCI_SCAN_SHOW	1
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 
 #define CONFIG_PCI_MEM_BUS	0x40000000
 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
@@ -85,7 +88,6 @@
 
 /* USB */
 #define CONFIG_USB_OHCI_NEW
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 #define CFG_OHCI_BE_CONTROLLER
 #undef CFG_USB_OHCI_BOARD_INIT
@@ -143,7 +145,7 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
@@ -172,19 +174,16 @@
  * IPB Bus clocking configuration.
  */
 #if defined(CONFIG_LITE5200B)
-#define CFG_IPBCLK_EQUALS_XLBCLK 	/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK	/* define for 133MHz speed */
 #else
-#undef CFG_IPBCLK_EQUALS_XLBCLK   	/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 #endif /* CONFIG_MPC5200 */
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE	8192
-
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)