X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FGEN860T.h;h=9a649ca125fec2ca3682c93aa18ab1d35075ce00;hb=79f38777947ac7685e2cef8bd977f954ab198c0e;hp=12f879a0e0012e3c05728e32895098a1c1631bd3;hpb=2419169f5749d7af501b3b77a5336d1d535320de;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 12f879a..9a649ca 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -35,6 +35,8 @@
 #define CONFIG_MPC860
 #define CONFIG_GEN860T
 
+#define	CONFIG_SYS_TEXT_BASE		0x40000000
+
 /*
  * Identify the board
  */
@@ -62,16 +64,6 @@
 #define CONFIG_BAUDRATE			38400
 
 /*
- * Set allowable console baud rates
- */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600,		\
-					  19200,	\
-					  38400,	\
-					  57600,	\
-					  115200,	\
-					}
-
-/*
  * Print console information
  */
 #undef	 CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -104,11 +96,6 @@
 #define	CONFIG_SYS_LOADS_BAUD_CHANGE
 
 /*
- * Set default load address for tftp network downloads
- */
-#define	CONFIG_SYS_TFTP_LOADADDR				0x01000000
-
-/*
  * Turn off the watchdog timer
  */
 #undef	CONFIG_WATCHDOG
@@ -290,7 +277,6 @@
  * Use the "hush" command parser
  */
 #define	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * Set buffer size for console I/O
@@ -380,9 +366,9 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR		CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_END		0x2F00	/* End of used area in DPRAM		*/
+#define	CONFIG_SYS_INIT_RAM_SIZE		0x2F00	/* Size of used area in DPRAM		*/
 #define	CONFIG_SYS_INIT_DATA_SIZE		64	/* # bytes reserved for initial data*/
-#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE)
 #define	CONFIG_SYS_INIT_SP_OFFSET		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -725,12 +711,6 @@
 						)
 
 /*
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	/* Software reboot					*/
-
-/*
  * FEC interrupt assignment
  */
 #define FEC_INTERRUPT   SIU_LEVEL1