X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FG2000.h;h=00f27ccfb9f6700e52031ad6123d9c937655bc51;hb=d98b0523cfaaedeecb263b15c121c0727b0d80b9;hp=6819c3e3620988eab1abe81ba2e0ef12b9ccf188;hpb=84efbf4d144ff8aaed3cca036aebb1fe69eff3f4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 6819c3e..00f27cc 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -37,6 +37,8 @@
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_G2000		1	/* ...on a PLU405 board		*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
 
@@ -151,9 +153,14 @@
 #define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD	    691200
-#undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	\
@@ -295,6 +302,7 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
@@ -366,23 +374,15 @@
  *
  * following GPIO setting changed for G20000, 080304
  */
-#define CONFIG_SYS_GPIO0_OSRH          0x40005555
-#define CONFIG_SYS_GPIO0_OSRL          0x40000110
-#define CONFIG_SYS_GPIO0_ISR1H         0x00000000
-#define CONFIG_SYS_GPIO0_ISR1L         0x15555445
-#define CONFIG_SYS_GPIO0_TSRH          0x00000000
+#define CONFIG_SYS_GPIO0_OSRL          0x40005555
+#define CONFIG_SYS_GPIO0_OSRH          0x40000110
+#define CONFIG_SYS_GPIO0_ISR1L         0x00000000
+#define CONFIG_SYS_GPIO0_ISR1H         0x15555445
 #define CONFIG_SYS_GPIO0_TSRL          0x00000000
+#define CONFIG_SYS_GPIO0_TSRH          0x00000000
 #define CONFIG_SYS_GPIO0_TCR           0xF7FF8014
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */