X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FDU440.h;h=9c3499406f60897dd47b969bef7f02aad2ae5537;hb=550650ddd0fde00f245bc3da72d7272844198394;hp=508a0cae3d830c2fda8e5fa7f8fb447a328a9563;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 508a0ca..9c34994 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -60,11 +60,9 @@
 #define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
 #define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
 #define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
-#define CONFIG_SYS_PCI_IOBASE          0xe8000000
-
-
-/* Don't change either of these */
-#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+#define CONFIG_SYS_PCI_IOBASE		0xe8000000
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID	PCI_VENDOR_ID_ESDGMBH
+#define CONFIG_SYS_PCI_SUBSYS_ID	0x0444		/* device ID for DU440 */
 
 #define CONFIG_SYS_USB2D0_BASE		0xe0000100
 #define CONFIG_SYS_USB_DEVICE		0xe0000000
@@ -85,10 +83,14 @@
 /*
  * Serial Port
  */
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI     1
-#undef CONFIG_UART1_CONSOLE
 
 #define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -168,9 +170,9 @@
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged	        */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_I2C_CMD_TREE     1
 #define CONFIG_I2C_MULTI_BUS    1
 
 #define CONFIG_SYS_SPD_BUS_NUM         0
@@ -253,6 +255,7 @@
 int du440_phy_addr(int devnum);
 #endif
 
+#define CONFIG_PPC4xx_EMAC
 #define	CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		du440_phy_addr(0) /* PHY address	*/
@@ -289,14 +292,13 @@ int du440_phy_addr(int devnum);
 
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BMP
+#define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
 #define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
@@ -308,9 +310,10 @@ int du440_phy_addr(int devnum);
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_USB
 
 #define CONFIG_SUPPORT_VFAT
 
@@ -410,7 +413,6 @@ int du440_phy_addr(int devnum);
  * NAND FLASH
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	2
-#define NAND_MAX_CHIPS		CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips */
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \
 				 CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS}
@@ -428,7 +430,7 @@ int du440_phy_addr(int devnum);
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-#define CONFIG_AUTOSCRIPT	1
+#define CONFIG_SOURCE		1
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP