X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FCPCI750.h;h=cd2fa9514f90ca5c896a86be77f7f367a512178b;hb=1a4596601fd395f3afb8f82f3f840c5e00bdd57a;hp=3b0b888f7eb44f81a2b67f7f3c28823998d480c7;hpb=0a14d6b8f4d21ff59a9b7686a49a77069a9fcd2a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 3b0b888..cd2fa95 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001
  * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+ 
  */
 
 /*
@@ -57,9 +41,11 @@
 
 #define CONFIG_CPCI750		1	/* this is an CPCI750 board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xfff00000
+
 #define CONFIG_BAUDRATE		9600	/* console baudrate = 9600	*/
 
-#undef	CONFIG_ECC			/* enable ECC support */
+#define CONFIG_MV64360_ECC		/* enable ECC support */
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
@@ -74,7 +60,6 @@
 /*#define CONFIG_SYS_HUSH_PARSER*/
 #define CONFIG_SYS_HUSH_PARSER
 
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
@@ -98,7 +83,6 @@
 #define CONFIG_MPSC_PORT	0
 
 /* to change the default ethernet port, use this define (options: 0, 1, 2) */
-#define CONFIG_NET_MULTI
 #define MV_ETH_DEVS		1
 #define CONFIG_ETHER_PORT	0
 
@@ -186,6 +170,8 @@
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_SPEED	80000		/* I2C speed default */
 
+#define CONFIG_PRAM 0
+
 #define CONFIG_SYS_GT_DUAL_CPU			/* also for JTAG even with one cpu */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
@@ -234,18 +220,12 @@
 #define CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address */
 
 #define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
-#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
 
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_TCLK		133000000
 
-/*#define CONFIG_SYS_750FX_HID0		0x8000c084*/
-#define CONFIG_SYS_750FX_HID0		0x80008484
-#define CONFIG_SYS_750FX_HID1		0x54800000
-#define CONFIG_SYS_750FX_HID2		0x00000000
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -265,9 +245,8 @@
 /* #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000*/ /* unused memory region */
 /* #define CONFIG_SYS_INIT_RAM_ADDR	0xfba00000*/ /* unused memory region */
 #define CONFIG_SYS_INIT_RAM_ADDR	0xf1080000 /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_END	0x1000
-#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 #define RELOCATE_INTERNAL_RAM_ADDR
 #ifdef RELOCATE_INTERNAL_RAM_ADDR
@@ -458,7 +437,11 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
 #define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
 #define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
-
+#ifndef __ASSEMBLY__
+int ata_device(int dev);
+#endif
+#define ATA_DEVICE(dev)                 ata_device(dev)
+#define CONFIG_ATAPI                    1
 
 /*----------------------------------------------------------------------
  * Initial BAT mappings
@@ -498,8 +481,8 @@
  * IBAT4 and DBAT4
  * FIXME: ingo disable BATs for Linux Kernel
  */
-#undef SETUP_HIGH_BATS_FX750		/* don't initialize BATS 4-7 */
-/*#define SETUP_HIGH_BATS_FX750*/		/* initialize BATS 4-7 */
+/* #undef SETUP_HIGH_BATS_FX750	*/	/* don't initialize BATS 4-7 */
+#define SETUP_HIGH_BATS_FX750		/* initialize BATS 4-7 */
 
 #ifdef SETUP_HIGH_BATS_FX750
 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
@@ -617,14 +600,12 @@
 
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #define CONFIG_SYS_BOARD_ASM_INIT	1
 
+#define CPCI750_SLAVE_TEST	(((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
+#define CPCI750_ECC_TEST	(((in8(0xf0300000) & 0x02) == 0) ? 1 : 0)
+#define CONFIG_SYS_PLD_VER	0xf0e00000
+
+#define CONFIG_OF_LIBFDT 1
+
 #endif	/* __CONFIG_H */