X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FCPCI750.h;h=37341cbb990f1a93f770690bd0291e74913f388a;hb=20ae5193e325ad005ca9e15377838e0763069658;hp=1c8c68b3e47960e81eae73dc645dff2e5566b232;hpb=8a452c2c17bc284e3f91b8ed4aec9d2b9b342df7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 1c8c68b..37341cb 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -57,6 +57,8 @@
 
 #define CONFIG_CPCI750		1	/* this is an CPCI750 board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xfff00000
+
 #define CONFIG_BAUDRATE		9600	/* console baudrate = 9600	*/
 
 #define CONFIG_MV64360_ECC		/* enable ECC support */
@@ -234,8 +236,7 @@
 #define CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address */
 
 #define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
-#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
 
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
@@ -617,14 +618,6 @@
 
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #define CONFIG_SYS_BOARD_ASM_INIT	1
 
 #define CPCI750_SLAVE_TEST	(((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)