X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FCPCI4052.h;h=deb6f826e1ab65271e77f679938db372887c0a8f;hb=c9032ce168c1344fe8ffe8604825ec343ec14adf;hp=ffae107a9a8313e3514c0b38336f1f8948dca5db;hpb=2fbb8462b0e18893b4b739705db047ffda82d4fc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index ffae107..deb6f82 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -23,15 +23,11 @@
 #undef  CONFIG_CPCI405_6U               /* enable this for 6U boards    */
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
-#define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	 1	/* call misc_init_r()		*/
 
 #define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/
 
-#define CONFIG_BAUDRATE		9600
-
 #undef	CONFIG_BOOTARGS
 #undef	CONFIG_BOOTCOMMAND
 
@@ -67,13 +63,8 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BSP
 #define CONFIG_CMD_EEPROM
 
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_SUPPORT_VFAT
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
@@ -98,8 +89,6 @@
 
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
-
 #define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
@@ -111,18 +100,11 @@
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD	    691200
 
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
-	 57600, 115200, 230400, 460800, 921600 }
-
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
 
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
-
 #define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
@@ -133,10 +115,8 @@
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI			/* include pci support	        */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_HOST	PCI_HOST_AUTO   /* select pci host function     */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
 					/* resource configuration       */
 
 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */