X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FCMS700.h;h=ca258e6b29dc5699d6078ffd4f5416dd75e1182a;hb=880540decfb855e96bc14ac84ac7784669e4b382;hp=6438b72582488ae2e0a8be50e8d4e67f200077ef;hpb=d48455ad8cefd25d7b49f68fd16d0e9fd551732a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 6438b72..ca258e6 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -55,7 +55,6 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_PPC4xx_EMAC
-#define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_MII		1	/* MII PHY management		*/
@@ -104,9 +103,6 @@
 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
@@ -230,10 +226,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
@@ -286,10 +283,9 @@
 #define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
 #define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM	*/
 
-#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -320,14 +316,6 @@
 #define CONFIG_SYS_PLD_RESET		(0x80000000 >> 12)   /* GPIO12 */
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */