X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FC29XPCIE.h;h=f75919dc89e6ecf14cea10368abe9587ec1dd4b2;hb=bb6b142fc16713bb83e471912e614ac01eec4584;hp=16920c6032037654b7ce96490932ecf77373bdae;hpb=c1924d85af4a07dc70aef1ef95c48b54a136733f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 16920c6..f75919d 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -11,7 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_PHYS_64BIT
 #define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_C29XPCIE
@@ -92,7 +91,7 @@
 
 #define CONFIG_PCI			/* Enable PCI/PCIE */
 #ifdef CONFIG_PCI
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
@@ -100,7 +99,6 @@
 
 #define CONFIG_CMD_PCI
 
-
 /*
  * PCI Windows
  * Memory space is mapped 1-1, but I/O space must start from 0.
@@ -329,9 +327,9 @@
 
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000
-#define CONFIG_SYS_INIT_RAM_END		0x00004000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END \
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
 						- GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -393,20 +391,6 @@
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
-
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SPEED	400000
@@ -423,10 +407,7 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
-#define CONFIG_CMD_I2C
-
 /* eSPI - Enhanced SPI */
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		10000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 
@@ -489,8 +470,6 @@
  */
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 /* Hash command with SHA acceleration supported in hardware */
@@ -537,7 +516,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE		115200
 
@@ -551,7 +529,7 @@
 	"consoledev=ttyS0\0"				\
 	"ramdiskaddr=2000000\0"				\
 	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
-	"fdtaddr=c00000\0"				\
+	"fdtaddr=1e00000\0"				\
 	"fdtfile=name/of/device-tree.dtb\0"			\
 	"othbootargs=ramdisk_size=600000\0"		\