X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FBSC9132QDS.h;h=4fc64a8f187b7ba74675af9198ffa125b7fe2923;hb=88718be3001055fa2801a44ab10570279b3f2cb7;hp=f385509dafe9cad2257659e9da10b4a04e374bbd;hpb=85887300aedecfc92eed93c7d2538144e8e45dc0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index f385509..4fc64a8 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -26,13 +26,11 @@
 #define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
 #endif
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
-#define CONFIG_SPL_TEXT_BASE		0xFFFFE000
 #define CONFIG_SPL_MAX_SIZE		8192
 #define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
 #define CONFIG_SPL_RELOC_STACK		0x00100000
@@ -40,7 +38,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0
-#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -60,7 +57,6 @@
 #define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
 /*
@@ -311,7 +307,7 @@ combinations. this should be removed later
 #endif
 
 /* Set up IFC registers for boot location NOR/NAND */
-#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
+#if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
@@ -406,10 +402,6 @@ combinations. this should be removed later
  * used for SLIC
  */
 /* eSPI - Enhanced SPI */
-#ifdef CONFIG_FSL_ESPI
-#define CONFIG_SF_DEFAULT_SPEED		10000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-#endif
 
 #if defined(CONFIG_TSEC_ENET)
 
@@ -456,26 +448,8 @@ combinations. this should be removed later
 #if defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_SIZE			0x2000
-#elif defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_ENV_SPI_BUS	0
-#define CONFIG_ENV_SPI_CS	0
-#define CONFIG_ENV_SPI_MAX_HZ	10000000
-#define CONFIG_ENV_SPI_MODE	0
-#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_SIZE		0x2000
-#elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
-#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET	((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
-#elif defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE			0x2000
-#else
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x20000
 #endif
 
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */