X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FB4860QDS.h;h=2a8aeeead560617d76717f66b265a58864a31fee;hb=645176d1d5c37c91ddb06c366678fbe302550387;hp=50a5751617982bf7d8ba6d7c9472176f7060d16c;hpb=80d307d1159b7edfc28b465e5a359c1dfb20566e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 50a5751..2a8aeee 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -13,7 +13,6 @@
  * B4860 QDS board configuration file
  */
 #define CONFIG_B4860QDS
-#define CONFIG_PHYS_64BIT
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI	$(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
@@ -83,7 +82,7 @@
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
@@ -498,20 +497,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */
 #endif
 
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */
@@ -586,9 +571,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
@@ -729,7 +711,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7	 /*SLOT 1*/
 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6	 /*SLOT 2*/
 
-
 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
@@ -752,14 +733,9 @@ unsigned long get_board_ddr_clk(void);
  * Command line configuration.
  */
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -781,11 +757,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #endif
 #endif
 
@@ -827,7 +800,6 @@ unsigned long get_board_ddr_clk(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE	115200
 
@@ -856,7 +828,7 @@ unsigned long get_board_ddr_clk(void);
 	"consoledev=ttyS0\0"					\
 	"ramdiskaddr=2000000\0"					\
 	"ramdiskfile=b4860qds/ramdisk.uboot\0"			\
-	"fdtaddr=c00000\0"					\
+	"fdtaddr=1e00000\0"					\
 	"fdtfile=b4860qds/b4860qds.dtb\0"				\
 	"bdev=sda3\0"
 
@@ -894,7 +866,7 @@ unsigned long get_board_ddr_clk(void);
  "setenv bootargs root=/dev/ram rw "		\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "setenv ramdiskaddr 0x02000000;"		\
- "setenv fdtaddr 0x00c00000;"			\
+ "setenv fdtaddr 0x01e00000;"			\
  "setenv loadaddr 0x1000000;"			\
  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
@@ -926,8 +898,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif	/* __CONFIG_H */