X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FAlaska8220.h;h=3d4cd36a49652904b1119e22fcd84877d60cc938;hb=9314cee6917444ab88bd4e758da7a30975120187;hp=5ab6fe63f8fdef7ef14ba96d8a49a20fb051e9f2;hpb=e2ffd59b4d93c9149de1caaa087371b0cfc512c9;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index 5ab6fe6..3d4cd36 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -31,74 +31,74 @@ #define CONFIG_MPC8220 1 #define CONFIG_ALASKA8220 1 /* ... on Alaska board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ +#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */ + +/* Define this for PSC console +#define CONFIG_PSC_CONSOLE 1 +*/ + #define CONFIG_EXTUART_CONSOLE 1 #ifdef CONFIG_EXTUART_CONSOLE +# define CONFIG_CONS_INDEX 1 +# define CFG_NS16550_SERIAL # define CFG_NS16550 # define CFG_NS16550_REG_SIZE 1 # define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008) +# define CFG_NS16550_CLK 18432000 #endif #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + + /* - * Supported commands + * BOOTP options */ -/* CONFIG_CMD_DFL includes CFG_CMD_BDI (bdinfo), CFG_CMD_LOADS (loads), - CFG_CMD_LOADB (loadb), CFG_CMD_IMI (iminfo), CFG_CMD_FLASH - (flinfo, erase, protect), CFG_CMD_MEMORY (md, mm, nm, mw, cp, cmp, - crc, base, loop, mtest), CFG_CMD_ENV (printenv, setenv, saveenv), - CFG_CMD_BOOTD (bootd), CFG_CMD_CONSOLE (coninfo), CFG_CMD_NET (bootp, - tftpboot, rarpboot), CFG_CMD_RUN, CFG_CMD_MISC (sleep, etc), - CFG_CMD_BSP, CFG_CMD_IMLS, CFG_CMD_FPGA */ - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CACHE | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM \ - ) -/* CFG_CMD_DHCP | \ */ -/* CFG_CMD_MII | \ */ -/* CFG_CMD_PCI | \ */ -/* CFG_CMD_USB */ - -# define CONFIG_NET_MULTI -/*#if (CONFIG_COMMANDS & CFG_CMD_NET) -# define CONFIG_NET_MULTI -#else -# undef CONFIG_NET_MULTI -#endif*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + + +#define CONFIG_NET_MULTI +#define CONFIG_MII /* * Autobooting @@ -133,7 +133,7 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 3 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 /* -#define CFG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_IS_IN_EEPROM 1 #define CFG_ENV_OFFSET 0 #define CFG_ENV_SIZE 256 */ @@ -225,27 +225,16 @@ #define CONFIG_ENV_OVERWRITE 1 #if defined CFG_ENV_IS_IN_FLASH -#undef CFG_ENV_IS_IN_NVRAM -#undef CFG_ENV_IS_IN_EEPROM -#elif defined CFG_ENV_IS_IN_NVRAM +#undef CONFIG_ENV_IS_IN_NVRAM +#undef CONFIG_ENV_IS_IN_EEPROM +#elif defined CONFIG_ENV_IS_IN_NVRAM #undef CFG_ENV_IS_IN_FLASH -#undef CFG_ENV_IS_IN_EEPROM -#elif defined CFG_ENV_IS_IN_EEPROM -#undef CFG_ENV_IS_IN_NVRAM +#undef CONFIG_ENV_IS_IN_EEPROM +#elif defined CONFIG_ENV_IS_IN_EEPROM +#undef CONFIG_ENV_IS_IN_NVRAM #undef CFG_ENV_IS_IN_FLASH #endif -#ifndef CFG_JFFS2_FIRST_SECTOR -#define CFG_JFFS2_FIRST_SECTOR 0 -#endif -#ifndef CFG_JFFS2_FIRST_BANK -#define CFG_JFFS2_FIRST_BANK 0 -#endif -#ifndef CFG_JFFS2_NUM_BANKS -#define CFG_JFFS2_NUM_BANKS 1 -#endif -#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1) - /* * Memory map */ @@ -272,6 +261,19 @@ #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/* SDRAM configuration */ +#define CFG_SDRAM_TOTAL_BANKS 2 +#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ +#define CFG_SDRAM_SPD_SIZE 0x40 +#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ + +/* SDRAM drive strength register */ +#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ + (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ + (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ + (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ + (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) + /* * Ethernet configuration */ @@ -285,7 +287,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -301,10 +303,34 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ #define CFG_HID0_INIT HID0_ICE | HID0_ICFI #define CFG_HID0_FINAL HID0_ICE +/* + * JFFS2 partitions + */ + +/* No command line, one static partition */ +/* +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0x00400000 +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 +*/ + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=alaska-0" +#define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)" +*/ + #endif /* __CONFIG_H */