X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2F3c120_devboard.h;h=e67338c202c92af510870d4e47431e05498f9f6f;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=f934a171b846a70dbcaef1fc81e46731d05f447b;hpb=a0e80c97c9ba1409c2370f6c8b2a4d6a48cdb15c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h
index f934a17..e67338c 100644
--- a/include/configs/3c120_devboard.h
+++ b/include/configs/3c120_devboard.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
  * Scott McNutt <smcnutt@psyent.com>
  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -12,7 +11,6 @@
 /*
  * BOARD/CPU
  */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * SERIAL
@@ -21,33 +19,6 @@
 /*
  * CFI Flash
  */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-
-/*
- * NET options
- */
-#define CONFIG_SYS_RX_ETH_BUFFER	0
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_PHY_MARVELL
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * FDT options
- */
-#define CONFIG_LMB
 
 /*
  * MEMORY ORGANIZATION
@@ -55,40 +26,7 @@
  * -The heap is placed below the monitor
  * -The stack is placed below the heap (&grows down).
  */
-#define CONFIG_SYS_SDRAM_BASE		0xD0000000
-#define CONFIG_SYS_SDRAM_SIZE		0x08000000
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_LEN		0x80000	/* Reserve 512k */
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
-					 CONFIG_SYS_SDRAM_SIZE - \
-					 CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MALLOC_LEN		0x20000
-
-/*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-
-#define CONFIG_ENV_SIZE			0x20000	/* 128k, 1 sector */
-#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
-#define CONFIG_ENV_ADDR			(0xe2800000 + CONFIG_SYS_MONITOR_LEN)
-
-/*
- * MISC
- */
-#define CONFIG_SYS_LONGHELP		/* Provide extended help */
-#define CONFIG_SYS_LOAD_ADDR		0xd4000000	/* Half of RAM */
-#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
-					 CONFIG_ENV_SIZE - \
-					 CONFIG_SYS_MALLOC_LEN -	\
-					 0x10000)
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
+#define CFG_SYS_SDRAM_BASE		0xD0000000
+#define CFG_SYS_SDRAM_SIZE		0x08000000
 
 #endif /* __CONFIG_H */