X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2F10m50_devboard.h;h=d05cc613d07c5b59949e1360868ddb7739a06fa0;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=48d50637162422aee520b5f30a493df69bbd8715;hpb=9ef671c9d4c70af3f8b21d8a31a89af4dc74d6b3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h
index 48d5063..d05cc61 100644
--- a/include/configs/10m50_devboard.h
+++ b/include/configs/10m50_devboard.h
@@ -12,14 +12,12 @@
 /*
  * BOARD/CPU
  */
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * SERIAL
  */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */
+#define CONFIG_SYS_NS16550_MEM32
 
 /*
  * Flash
@@ -32,7 +30,6 @@
  * NET options
  */
 #define CONFIG_SYS_RX_ETH_BUFFER	0
-#define CONFIG_CMD_MII
 #define CONFIG_PHY_GIGE
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #define CONFIG_PHY_MARVELL
@@ -48,24 +45,9 @@
 /*
  * FDT options
  */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 #define CONFIG_LMB
 
 /*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-#define CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_ENV_SIZE			0x10000	/* 64k, 1 sector */
-#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
-#define CONFIG_ENV_ADDR			0xf4040000
-
-/*
  * MEMORY ORGANIZATION
  * -Monitor at top of sdram.
  * -The heap is placed below the monitor
@@ -75,13 +57,25 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_LEN		0x40000	/* Reserve 256k */
+#define CONFIG_SYS_MONITOR_LEN		0x80000	/* Reserve 512k */
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
 					 CONFIG_SYS_SDRAM_SIZE - \
 					 CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_MALLOC_LEN		0x20000
 
 /*
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ */
+
+#define CONFIG_ENV_SIZE			0x10000	/* 64k, 1 sector */
+#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
+#define CONFIG_ENV_ADDR			(0xf4000000 + CONFIG_SYS_MONITOR_LEN)
+
+/*
  * MISC
  */
 #define CONFIG_SYS_LONGHELP		/* Provide extended help */
@@ -91,12 +85,14 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + \
 					 16)	/* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_LOAD_ADDR		0xcc000000	/* Half of RAM */
+#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
 					 CONFIG_ENV_SIZE - \
 					 CONFIG_SYS_MALLOC_LEN -	\
 					 0x10000)
+#define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 
 #endif /* __CONFIG_H */