X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2F10m50_devboard.h;h=940a1b5c2183e92a1c3aa3bd57de356e485a3b49;hb=432e39806805c46d583e75e8dd2f7b71cc6089c1;hp=8a91cdbd2290e7d0e0681425c496b8afbe3f2751;hpb=c1924d85af4a07dc70aef1ef95c48b54a136733f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h
index 8a91cdb..940a1b5 100644
--- a/include/configs/10m50_devboard.h
+++ b/include/configs/10m50_devboard.h
@@ -12,14 +12,11 @@
 /*
  * BOARD/CPU
  */
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * SERIAL
  */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */
 #define CONFIG_SYS_NS16550_MEM32
 
 /*
@@ -33,8 +30,6 @@
  * NET options
  */
 #define CONFIG_SYS_RX_ETH_BUFFER	0
-#define CONFIG_CMD_MII
-#define CONFIG_PHY_GIGE
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #define CONFIG_PHY_MARVELL
 
@@ -49,24 +44,9 @@
 /*
  * FDT options
  */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 #define CONFIG_LMB
 
 /*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-#define CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_ENV_SIZE			0x10000	/* 64k, 1 sector */
-#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
-#define CONFIG_ENV_ADDR			0xf4040000
-
-/*
  * MEMORY ORGANIZATION
  * -Monitor at top of sdram.
  * -The heap is placed below the monitor
@@ -76,28 +56,38 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_LEN		0x40000	/* Reserve 256k */
+#define CONFIG_SYS_MONITOR_LEN		0x80000	/* Reserve 512k */
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
 					 CONFIG_SYS_SDRAM_SIZE - \
 					 CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_MALLOC_LEN		0x20000
 
 /*
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ */
+
+#define CONFIG_ENV_SIZE			0x10000	/* 64k, 1 sector */
+#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
+#define CONFIG_ENV_ADDR			(0xf4000000 + CONFIG_SYS_MONITOR_LEN)
+
+/*
  * MISC
  */
 #define CONFIG_SYS_LONGHELP		/* Provide extended help */
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O buf size */
 #define CONFIG_SYS_MAXARGS		16	/* Max command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + \
-					 16)	/* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_LOAD_ADDR		0xcc000000	/* Half of RAM */
+#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
 					 CONFIG_ENV_SIZE - \
 					 CONFIG_SYS_MALLOC_LEN -	\
 					 0x10000)
+#define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 
 #endif /* __CONFIG_H */