X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2F10m50_devboard.h;h=35560ab68351fb0268822e6e8b338c072140bb3f;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=c9742f37f4d8daa0f6854e64d4f1cb7eb9ebbd2c;hpb=4bafceff0e9e5a36908031e41c69a6b37e82da58;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h
index c9742f3..35560ab 100644
--- a/include/configs/10m50_devboard.h
+++ b/include/configs/10m50_devboard.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
  * Scott McNutt <smcnutt@psyent.com>
  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -12,7 +11,6 @@
 /*
  * BOARD/CPU
  */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * SERIAL
@@ -22,26 +20,10 @@
 /*
  * Flash
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	1024
-#define CONFIG_MTD_DEVICE
-
-/*
- * NET options
- */
-#define CONFIG_SYS_RX_ETH_BUFFER	0
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_PHY_MARVELL
 
 /*
  * BOOTP options
  */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * FDT options
- */
-#define CONFIG_LMB
 
 /*
  * MEMORY ORGANIZATION
@@ -51,35 +33,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0xc8000000
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_MONITOR_IS_IN_RAM
 #define CONFIG_SYS_MONITOR_LEN		0x80000	/* Reserve 512k */
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
-					 CONFIG_SYS_SDRAM_SIZE - \
-					 CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MALLOC_LEN		0x20000
-
-/*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-
-#define CONFIG_ENV_SIZE			0x10000	/* 64k, 1 sector */
-#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
-#define CONFIG_ENV_ADDR			(0xf4000000 + CONFIG_SYS_MONITOR_LEN)
-
-/*
- * MISC
- */
-#define CONFIG_SYS_LOAD_ADDR		0xcc000000	/* Half of RAM */
-#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
-					 CONFIG_ENV_SIZE - \
-					 CONFIG_SYS_MALLOC_LEN -	\
-					 0x10000)
 
 #endif /* __CONFIG_H */