X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfig_cmd_all.h;h=cb0ab6d61a23bd44a535a37b852a75a24679a46c;hb=fa379223cd61052331342e525778d96270ee6ed9;hp=3e8983f2443c7c60dc1841bfb904a8040e46892f;hpb=f763be224fa78893384416734419d8e052c1c5ef;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index 3e8983f..cb0ab6d 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -13,89 +13,12 @@
  * Alphabetical list of all possible commands.
  */
 
-#define CONFIG_CMD_AMBAPP	/* AMBA Plug & Play Bus print utility */
-#define CONFIG_CMD_ASKENV	/* ask for env variable		*/
-#define CONFIG_CMD_BDI		/* bdinfo			*/
-#define CONFIG_CMD_BEDBUG	/* Include BedBug Debugger	*/
-#define CONFIG_CMD_BMP		/* BMP support			*/
-#define CONFIG_CMD_BOOTD	/* bootd			*/
-#define CONFIG_CMD_BOOTZ	/* boot zImage			*/
-#define CONFIG_CMD_BSP		/* Board Specific functions	*/
-#define CONFIG_CMD_CACHE	/* icache, dcache		*/
-#define CONFIG_CMD_CDP		/* Cisco Discovery Protocol	*/
-#define CONFIG_CMD_CLK		/* Clock support		*/
-#define CONFIG_CMD_CONSOLE	/* coninfo			*/
-#define CONFIG_CMD_DATE		/* support for RTC, date/time...*/
-#define CONFIG_CMD_DHCP		/* DHCP Support			*/
-#define CONFIG_CMD_DIAG		/* Diagnostics			*/
-#define CONFIG_CMD_DISPLAY	/* Display support		*/
-#define CONFIG_CMD_DOC		/* Disk-On-Chip Support		*/
-#define CONFIG_CMD_DTT		/* Digital Therm and Thermostat */
-#define CONFIG_CMD_ECHO		/* echo arguments		*/
-#define CONFIG_CMD_EDITENV	/* editenv			*/
-#define CONFIG_CMD_EEPROM	/* EEPROM read/write support	*/
-#define CONFIG_CMD_ELF		/* ELF (VxWorks) load/boot cmd	*/
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_FDC		/* Floppy Disk Support		*/
-#define CONFIG_CMD_FDOS		/* Floppy DOS support		*/
-#define CONFIG_CMD_FLASH	/* flinfo, erase, protect	*/
-#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-#define CONFIG_CMD_FUSE		/* Device fuse support		*/
-#define CONFIG_CMD_GETTIME	/* Get time since boot         */
-#define CONFIG_CMD_HASH		/* calculate hash / digest	*/
-#define CONFIG_CMD_HWFLOW	/* RTS/CTS hw flow control	*/
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_IDE		/* IDE harddisk support		*/
-#define CONFIG_CMD_IMI		/* iminfo			*/
-#define CONFIG_CMD_IMLS		/* List all found images	*/
-#define CONFIG_CMD_IMMAP	/* IMMR dump support		*/
-#define CONFIG_CMD_IO		/* Access to X86 IO space	*/
-#define CONFIG_CMD_IRQ		/* irqinfo			*/
-#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
-#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
-#define CONFIG_CMD_KGDB		/* kgdb				*/
-#define CONFIG_CMD_LICENSE	/* console license display	*/
-#define CONFIG_CMD_LOADB	/* loadb			*/
-#define CONFIG_CMD_LOADS	/* loads			*/
-#define CONFIG_CMD_MEMINFO	/* meminfo			*/
-#define CONFIG_CMD_MEMORY	/* md mm nm mw cp cmp crc base loop */
-#define CONFIG_CMD_MEMTEST	/* mtest			*/
-#define CONFIG_CMD_MFSL		/* FSL support for Microblaze	*/
-#define CONFIG_CMD_MII		/* MII support			*/
-#define CONFIG_CMD_MISC		/* Misc functions like sleep etc*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
-#define CONFIG_CMD_MTDPARTS	/* mtd parts support		*/
-#define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-#define CONFIG_CMD_NFS		/* NFS support			*/
-#define CONFIG_CMD_ONENAND	/* OneNAND support		*/
-#define CONFIG_CMD_PCI		/* pciinfo			*/
-#define CONFIG_CMD_PCMCIA	/* PCMCIA support		*/
-#define CONFIG_CMD_PING		/* ping support			*/
-#define CONFIG_CMD_PORTIO	/* Port I/O			*/
-#define CONFIG_CMD_REGINFO	/* Register dump		*/
 #define CONFIG_CMD_REISER	/* Reiserfs support		*/
-#define CONFIG_CMD_RARP		/* rarpboot support		*/
-#define CONFIG_CMD_READ		/* Read data from partition	*/
-#define CONFIG_CMD_RUN		/* run command in env variable	*/
 #define CONFIG_CMD_SANDBOX	/* sb command to access sandbox features */
-#define CONFIG_CMD_SAVEENV	/* saveenv			*/
 #define CONFIG_CMD_SAVES	/* save S record dump		*/
-#define CONFIG_CMD_SCSI		/* SCSI Support			*/
 #define CONFIG_CMD_SDRAM	/* SDRAM DIMM SPD info printout */
-#define CONFIG_CMD_SETEXPR	/* setexpr support		*/
-#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
-#define CONFIG_CMD_SNTP		/* SNTP support			*/
-#define CONFIG_CMD_SOURCE	/* "source" command support	*/
-#define CONFIG_CMD_SPI		/* SPI utility			*/
 #define CONFIG_CMD_TERMINAL	/* built-in Serial Terminal	*/
-#define CONFIG_CMD_UBI		/* UBI Support			*/
-#define CONFIG_CMD_UBIFS	/* UBIFS Support		*/
 #define CONFIG_CMD_UNIVERSE	/* Tundra Universe Support	*/
-#define CONFIG_CMD_UNZIP	/* unzip from memory to memory	*/
-#define CONFIG_CMD_USB		/* USB Support			*/
-#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
 #define CONFIG_CMD_ZFS		/* ZFS Support			*/
 
 #endif	/* _CONFIG_CMD_ALL_H */