X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fcommproc.h;h=6875c4c7544fe8c9934a7c7719506b01c84b9e77;hb=a5a58826110eb3da2956c6b3213bd750e166d75c;hp=82a1a985b23e06adca36a887ba723fdc453a65d8;hpb=3e1b36bd584228b0a8070c8b63351aefda652523;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/commproc.h b/include/commproc.h
index 82a1a98..6875c4c 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -535,44 +535,6 @@ typedef struct scc_enet {
 #define SICR_ENET_CLKRT	((uint)0x00002600)
 #endif	/* CONFIG_FPS850L, CONFIG_FPS860L */
 
-/*** HERMES-PRO ******************************************************/
-
-/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
-
-#ifdef CONFIG_HERMES
-
-#define	FEC_ENET	/* use FEC for EThernet */
-#undef	SCC_ENET
-
-
-#define PD_MII_TXD1	((ushort)0x1000)	/* PD  3 */
-#define PD_MII_TXD2	((ushort)0x0800)	/* PD  4 */
-#define PD_MII_TXD3	((ushort)0x0400)	/* PD  5 */
-#define PD_MII_RX_DV	((ushort)0x0200)	/* PD  6 */
-#define PD_MII_RX_ERR	((ushort)0x0100)	/* PD  7 */
-#define PD_MII_RX_CLK	((ushort)0x0080)	/* PD  8 */
-#define PD_MII_TXD0	((ushort)0x0040)	/* PD  9 */
-#define PD_MII_RXD0	((ushort)0x0020)	/* PD 10 */
-#define PD_MII_TX_ERR	((ushort)0x0010)	/* PD 11 */
-#define PD_MII_MDC	((ushort)0x0008)	/* PD 12 */
-#define PD_MII_RXD1	((ushort)0x0004)	/* PD 13 */
-#define PD_MII_RXD2	((ushort)0x0002)	/* PD 14 */
-#define PD_MII_RXD3	((ushort)0x0001)	/* PD 15 */
-
-#define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3...15 */
-
-#endif	/* CONFIG_HERMES */
-
-/*** ICU862  **********************************************************/
-
-#if defined(CONFIG_ICU862)
-
-#ifdef CONFIG_FEC_ENET
-#define FEC_ENET	/* use FEC for EThernet */
-#endif  /* CONFIG_FEC_ETHERNET */
-
-#endif /* CONFIG_ICU862 */
-
 /***  IP860  **********************************************************/
 
 #if defined(CONFIG_IP860)
@@ -713,28 +675,6 @@ typedef struct scc_enet {
 #define SICR_ENET_CLKRT	((uint)0x00250000)
 #endif	/* CONFIG_KM8XX */
 
-
-/***  MHPC  ********************************************************/
-
-#if defined(CONFIG_MHPC)
-/* This ENET stuff is for the MHPC with ethernet on SCC2.
- * Note TENA is on Port B.
- */
-#define	PROFF_ENET	PROFF_SCC2
-#define	CPM_CR_ENET	CPM_CR_CH_SCC2
-#define	SCC_ENET	1
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_RCLK	((ushort)0x0200)	/* PA 6 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA 5 */
-#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC 9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC 8 */
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002e00)	/* RCLK-CLK2, TCLK-CLK3 */
-#endif	/* CONFIG_MHPC */
-
 /***  NETVIA  *******************************************************/
 
 #if defined(CONFIG_NETVIA)