X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fcommon.h;h=2c21dee8505cf6ba0d2c3815fe1ef2362e9e60f0;hb=cc1e98b559e46630c3421a7762d02a58e5480926;hp=436200044f3272be4ed1a19f5575d2a4cb8270f7;hpb=b55c89ce0207d3a504238c1b8f268c56035656a3;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/common.h b/include/common.h index 4362000..2c21dee 100644 --- a/include/common.h +++ b/include/common.h @@ -1,8 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2000-2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __COMMON_H_ @@ -15,9 +14,6 @@ typedef volatile unsigned long vu_long; typedef volatile unsigned short vu_short; typedef volatile unsigned char vu_char; -/* Allow sharing constants with type modifiers between C and assembly. */ -#define _AC(X, Y) (X##Y) - #include #include #include @@ -38,9 +34,6 @@ typedef volatile unsigned char vu_char; #include #include -/* Bring in printf format macros if inttypes.h is included */ -#define __STDC_FORMAT_MACROS - #ifdef __LP64__ #define CONFIG_SYS_SUPPORT_64BIT_DATA #endif @@ -62,31 +55,19 @@ typedef void (interrupt_handler_t)(void *); #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN #endif -/* - * Function Prototypes +/* startup functions, used in: + * common/board_f.c + * common/init/board_init.c + * common/board_r.c + * common/board_info.c */ -int dram_init(void); +#include -/** - * dram_init_banksize() - Set up DRAM bank sizes - * - * This can be implemented by boards to set up the DRAM bank information in - * gd->bd->bi_dram(). It is called just before relocation, after dram_init() - * is called. - * - * If this is not provided, a default implementation will try to set up a - * single bank. It will do this if CONFIG_NR_DRAM_BANKS and - * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of - * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to - * get_effective_memsize(). - * - * @return 0 if OK, -ve on error +/* + * Function Prototypes */ -int dram_init_banksize(void); - void hang (void) __attribute__ ((noreturn)); -int timer_init(void); int cpu_init(void); #include @@ -109,114 +90,31 @@ int run_command_repeatable(const char *cmd, int flag); */ int run_command_list(const char *cmd, int len, int flag); -/* arch/$(ARCH)/lib/board.c */ -void board_init_f(ulong); -void board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); - -/** - * ulong board_init_f_alloc_reserve - allocate reserved area - * - * This function is called by each architecture very early in the start-up - * code to allow the C runtime to reserve space on the stack for writable - * 'globals' such as GD and the malloc arena. - * - * @top: top of the reserve area, growing down. - * @return: bottom of reserved area - */ -ulong board_init_f_alloc_reserve(ulong top); - -/** - * board_init_f_init_reserve - initialize the reserved area(s) - * - * This function is called once the C runtime has allocated the reserved - * area on the stack. It must initialize the GD at the base of that area. - * - * @base: top from which reservation was done - */ -void board_init_f_init_reserve(ulong base); - -/** - * arch_setup_gd() - Set up the global_data pointer - * - * This pointer is special in some architectures and cannot easily be assigned - * to. For example on x86 it is implemented by adding a specific record to its - * Global Descriptor Table! So we we provide a function to carry out this task. - * For most architectures this can simply be: - * - * gd = gd_ptr; - * - * @gd_ptr: Pointer to global data - */ -void arch_setup_gd(gd_t *gd_ptr); - -int checkboard(void); -int show_board_info(void); int checkflash(void); int checkdram(void); -int last_stage_init(void); -extern ulong monitor_flash_len; -int mac_read_from_eeprom(void); extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ -int set_cpu_clk_info(void); int mdm_init(void); -int print_cpuinfo(void); -int update_flash_size(int flash_size); -int arch_early_init_r(void); - -/* - * setup_board_extra() - Fill in extra details in the bd_t structure - * - * @return 0 if OK, -ve on error - */ -int setup_board_extra(void); /** - * arch_fsp_init() - perform firmware support package init - * - * Where U-Boot relies on binary blobs to handle part of the system init, this - * function can be used to set up the blobs. This is used on some Intel - * platforms. - */ -int arch_fsp_init(void); - -/** - * arch_cpu_init_dm() - init CPU after driver model is available - * - * This is called immediately after driver model is available before - * relocation. This is similar to arch_cpu_init() but is able to reference - * devices - * - * @return 0 if OK, -ve on error - */ -int arch_cpu_init_dm(void); - -/** - * Reserve all necessary stacks - * - * This is used in generic board init sequence in common/board_f.c. Each - * architecture could provide this function to tailor the required stacks. - * - * On entry gd->start_addr_sp is pointing to the suggested top of the stack. - * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures - * require only this can leave it untouched. + * Show the DRAM size in a board-specific way * - * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective - * positions of the stack. The stack pointer(s) will be set to this later. - * gd->irq_sp is only required, if the architecture needs it. + * This is used by boards to display DRAM information in their own way. * - * @return 0 if no error + * @param size Size of DRAM (which should be displayed along with other info) */ -__weak int arch_reserve_stacks(void); +void board_show_dram(phys_size_t size); /** - * Show the DRAM size in a board-specific way + * Get the uppermost pointer that is valid to access * - * This is used by boards to display DRAM information in their own way. + * Some systems may not map all of their address space. This function allows + * boards to indicate what their highest support pointer value is for DRAM + * access. * - * @param size Size of DRAM (which should be displayed along with other info) + * @param total_size Size of U-Boot (unused?) */ -void board_show_dram(phys_size_t size); +ulong board_get_usable_ram_top(ulong total_size); /** * arch_fixup_fdt() - Write arch-specific information to fdt @@ -228,7 +126,6 @@ void board_show_dram(phys_size_t size); */ int arch_fixup_fdt(void *blob); -int reserve_mmu(void); /* common/flash.c */ void flash_perror (int); @@ -351,20 +248,13 @@ static inline int env_set_addr(const char *varname, const void *addr) } #ifdef CONFIG_AUTO_COMPLETE -int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); +int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf, + bool dollar_comp); #endif int get_env_id (void); -void pci_init (void); void pci_init_board(void); -#if defined(CONFIG_DTB_RESELECT) -int embedded_dtb_select(void); -#endif - -int misc_init_f (void); -int misc_init_r (void); - /* common/exports.c */ void jumptable_init(void); @@ -394,24 +284,9 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned c #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) #endif -/* - * Set this up regardless of board - * type, to prevent errors. - */ -#if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) -# define CONFIG_SYS_DEF_EEPROM_ADDR 0 -#else -#if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) +#if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR #endif -#endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */ - -#if defined(CONFIG_SPI) -extern void spi_init_f (void); -extern void spi_init_r (void); -extern ssize_t spi_read (uchar *, int, uchar *, int); -extern ssize_t spi_write (uchar *, int, uchar *, int); -#endif /* $(BOARD)/$(BOARD).c */ int board_early_init_f (void); @@ -419,7 +294,6 @@ int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its r int board_late_init (void); int board_postclk_init (void); /* after clocks/timebase, before env/serial */ int board_early_init_r (void); -void board_poweroff (void); #if defined(CONFIG_SYS_DRAM_TEST) int testdram(void); @@ -461,16 +335,6 @@ u32 cpu_mask (void); u32 cpu_dsp_mask(void); int is_core_valid (unsigned int); -/** - * arch_cpu_init() - basic cpu-dependent setup for an architecture - * - * This is called after early malloc is available. It should handle any - * CPU- or SoC- specific init needed to continue the init sequence. See - * board_f.c for where it is called. If this is not provided, a default - * version (which does nothing) will be used. - */ -int arch_cpu_init(void); - void s_init(void); int checkcpu (void); @@ -500,8 +364,6 @@ int get_clocks (void); ulong get_bus_freq (ulong); int get_serial_clock(void); -int cpu_init_r (void); - /* $(CPU)/interrupts.c */ int interrupt_init (void); void timer_interrupt (struct pt_regs *); @@ -524,7 +386,6 @@ uint dpram_alloc(uint size); uint dpram_alloc_align(uint size,uint align); void bootcount_store (ulong); ulong bootcount_load (void); -#define BOOTCOUNT_MAGIC 0xB001C041 /* $(CPU)/.../ */ void mii_init (void); @@ -673,24 +534,18 @@ void show_activity(int arg); /* Multicore arch functions */ #ifdef CONFIG_MP -int cpu_status(int nr); -int cpu_reset(int nr); -int cpu_disable(int nr); -int cpu_release(int nr, int argc, char * const argv[]); +int cpu_status(u32 nr); +int cpu_reset(u32 nr); +int cpu_disable(u32 nr); +int cpu_release(u32 nr, int argc, char * const argv[]); #endif #else /* __ASSEMBLY__ */ -/* Drop a C type modifier (like in 3UL) for constants used in assembly. */ -#define _AC(X, Y) X - #endif /* __ASSEMBLY__ */ /* Put only stuff here that the assembler can digest */ -/* Declare an unsigned long constant digestable both by C and an assembler. */ -#define UL(x) _AC(x, UL) - #ifdef CONFIG_POST #define CONFIG_HAS_POST #ifndef CONFIG_POST_ALT_LIST @@ -698,11 +553,6 @@ int cpu_release(int nr, int argc, char * const argv[]); #endif #endif -#ifdef CONFIG_INIT_CRITICAL -#error CONFIG_INIT_CRITICAL is deprecated! -#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. -#endif - #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) /*