X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fasm-generic%2Fglobal_data.h;h=f392043796813483bceb536dd36134280c20fa1b;hb=63d4607e03e5f1f7ab9a18bc640e31f7d28874b4;hp=d9e220cfe3582eaf2bca571495cb7dd3ac0d13ba;hpb=2b18b89156335bf1f0d84f81d3597762bc48c61d;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index d9e220c..f392043 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -24,147 +24,518 @@ #include #include -typedef struct global_data { +struct driver_rt; + +typedef struct global_data gd_t; + +/** + * struct global_data - global data structure + */ +struct global_data { + /** + * @bd: board information + */ struct bd_info *bd; + /** + * @flags: global data flags + * + * See &enum gd_flags + */ unsigned long flags; + /** + * @baudrate: baud rate of the serial interface + */ unsigned int baudrate; - unsigned long cpu_clk; /* CPU clock in Hz! */ + /** + * @cpu_clk: CPU clock rate in Hz + */ + unsigned long cpu_clk; + /** + * @bus_clk: platform clock rate in Hz + */ unsigned long bus_clk; + /** + * @pci_clk: PCI clock rate in Hz + */ /* We cannot bracket this with CONFIG_PCI due to mpc5xxx */ unsigned long pci_clk; + /** + * @mem_clk: memory clock rate in Hz + */ unsigned long mem_clk; #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO) - unsigned long fb_base; /* Base address of framebuffer mem */ + /** + * @fb_base: base address of frame buffer memory + */ + unsigned long fb_base; #endif #if defined(CONFIG_POST) - unsigned long post_log_word; /* Record POST activities */ - unsigned long post_log_res; /* success of POST test */ - unsigned long post_init_f_time; /* When post_init_f started */ + /** + * @post_log_word: active POST tests + * + * @post_log_word is a bit mask defining which POST tests are recorded + * (see constants POST_*). + */ + unsigned long post_log_word; + /** + * @post_log_res: POST results + * + * @post_log_res is a bit mask with the POST results. A bit with value 1 + * indicates successful execution. + */ + unsigned long post_log_res; + /** + * @post_init_f_time: time in ms when post_init_f() started + */ + unsigned long post_init_f_time; #endif #ifdef CONFIG_BOARD_TYPES + /** + * @board_type: board type + * + * If a U-Boot configuration supports multiple board types, the actual + * board type may be stored in this field. + */ unsigned long board_type; #endif - unsigned long have_console; /* serial_init() was called */ + /** + * @have_console: console is available + * + * A value of 1 indicates that serial_init() was called and a console + * is available. + * A value of 0 indicates that console input and output drivers shall + * not be called. + */ + unsigned long have_console; #if CONFIG_IS_ENABLED(PRE_CONSOLE_BUFFER) - unsigned long precon_buf_idx; /* Pre-Console buffer index */ + /** + * @precon_buf_idx: pre-console buffer index + * + * @precon_buf_idx indicates the current position of the buffer used to + * collect output before the console becomes available + */ + unsigned long precon_buf_idx; #endif - unsigned long env_addr; /* Address of Environment struct */ - unsigned long env_valid; /* Environment valid? enum env_valid */ - unsigned long env_has_init; /* Bitmask of boolean of struct env_location offsets */ - int env_load_prio; /* Priority of the loaded environment */ - - unsigned long ram_base; /* Base address of RAM used by U-Boot */ - unsigned long ram_top; /* Top address of RAM used by U-Boot */ - unsigned long relocaddr; /* Start address of U-Boot in RAM */ - phys_size_t ram_size; /* RAM size */ - unsigned long mon_len; /* monitor len */ - unsigned long irq_sp; /* irq stack pointer */ - unsigned long start_addr_sp; /* start_addr_stackpointer */ + /** + * @env_addr: address of environment structure + * + * @env_addr contains the address of the structure holding the + * environment variables. + */ + unsigned long env_addr; + /** + * @env_valid: environment is valid + * + * See &enum env_valid + */ + unsigned long env_valid; + /** + * @env_has_init: bit mask indicating environment locations + * + * &enum env_location defines which bit relates to which location + */ + unsigned long env_has_init; + /** + * @env_load_prio: priority of the loaded environment + */ + int env_load_prio; + /** + * @ram_base: base address of RAM used by U-Boot + */ + unsigned long ram_base; + /** + * @ram_top: top address of RAM used by U-Boot + */ + unsigned long ram_top; + /** + * @relocaddr: start address of U-Boot in RAM + * + * After relocation this field indicates the address to which U-Boot + * has been relocated. It can be displayed using the bdinfo command. + * Its value is needed to display the source code when debugging with + * GDB using the 'add-symbol-file u-boot ' command. + */ + unsigned long relocaddr; + /** + * @ram_size: RAM size in bytes + */ + phys_size_t ram_size; + /** + * @mon_len: monitor length in bytes + */ + unsigned long mon_len; + /** + * @irq_sp: IRQ stack pointer + */ + unsigned long irq_sp; + /** + * @start_addr_sp: initial stack pointer address + */ + unsigned long start_addr_sp; + /** + * @reloc_off: relocation offset + */ unsigned long reloc_off; - struct global_data *new_gd; /* relocated global data */ + /** + * @new_gd: pointer to relocated global data + */ + struct global_data *new_gd; #ifdef CONFIG_DM - struct udevice *dm_root; /* Root instance for Driver Model */ - struct udevice *dm_root_f; /* Pre-relocation root instance */ - struct list_head uclass_root; /* Head of core tree */ + /** + * @dm_root: root instance for Driver Model + */ + struct udevice *dm_root; + /** + * @dm_root_f: pre-relocation root instance + */ + struct udevice *dm_root_f; + /** + * @uclass_root: head of core tree + */ + struct list_head uclass_root; +# if CONFIG_IS_ENABLED(OF_PLATDATA) + /** Dynamic info about the driver */ + struct driver_rt *dm_driver_rt; +# endif #endif #ifdef CONFIG_TIMER - struct udevice *timer; /* Timer instance for Driver Model */ + /** + * @timer: timer instance for Driver Model + */ + struct udevice *timer; #endif - - const void *fdt_blob; /* Our device tree, NULL if none */ - void *new_fdt; /* Relocated FDT */ - unsigned long fdt_size; /* Space reserved for relocated FDT */ -#ifdef CONFIG_OF_LIVE + /** + * @fdt_blob: U-Boot's own device tree, NULL if none + */ + const void *fdt_blob; + /** + * @new_fdt: relocated device tree + */ + void *new_fdt; + /** + * @fdt_size: space reserved for relocated device space + */ + unsigned long fdt_size; +#if CONFIG_IS_ENABLED(OF_LIVE) + /** + * @of_root: root node of the live tree + */ struct device_node *of_root; #endif #if CONFIG_IS_ENABLED(MULTI_DTB_FIT) - const void *multi_dtb_fit; /* uncompressed multi-dtb FIT image */ + /** + * @multi_dtb_fit: pointer to uncompressed multi-dtb FIT image + */ + const void *multi_dtb_fit; #endif - struct jt_funcs *jt; /* jump table */ - char env_buf[32]; /* buffer for env_get() before reloc. */ + /** + * @jt: jump table + * + * The jump table contains pointers to exported functions. A pointer to + * the jump table is passed to standalone applications. + */ + struct jt_funcs *jt; + /** + * @env_buf: buffer for env_get() before reloc + */ + char env_buf[32]; #ifdef CONFIG_TRACE - void *trace_buff; /* The trace buffer */ + /** + * @trace_buff: trace buffer + * + * When tracing function in U-Boot this field points to the buffer + * recording the function calls. + */ + void *trace_buff; #endif #if defined(CONFIG_SYS_I2C) - int cur_i2c_bus; /* current used i2c bus */ + /** + * @cur_i2c_bus: currently used I2C bus + */ + int cur_i2c_bus; #endif + /** + * @timebase_h: high 32 bits of timer + */ unsigned int timebase_h; + /** + * @timebase_l: low 32 bits of timer + */ unsigned int timebase_l; #if CONFIG_VAL(SYS_MALLOC_F_LEN) - unsigned long malloc_base; /* base address of early malloc() */ - unsigned long malloc_limit; /* limit address */ - unsigned long malloc_ptr; /* current address */ + /** + * @malloc_base: base address of early malloc() + */ + unsigned long malloc_base; + /** + * @malloc_limit: limit address of early malloc() + */ + unsigned long malloc_limit; + /** + * @malloc_ptr: current address of early malloc() + */ + unsigned long malloc_ptr; #endif #ifdef CONFIG_PCI - struct pci_controller *hose; /* PCI hose for early use */ - phys_addr_t pci_ram_top; /* top of region accessible to PCI */ + /** + * @hose: PCI hose for early use + */ + struct pci_controller *hose; + /** + * @pci_ram_top: top of region accessible to PCI + */ + phys_addr_t pci_ram_top; #endif #ifdef CONFIG_PCI_BOOTDELAY + /** + * @pcidelay_done: delay time before scanning of PIC hose expired + * + * If CONFIG_PCI_BOOTDELAY=y, pci_hose_scan() waits for the number of + * milliseconds defined by environment variable pcidelay before + * scanning. Once this delay has expired the flag @pcidelay_done + * is set to 1. + */ int pcidelay_done; #endif - struct udevice *cur_serial_dev; /* current serial device */ - struct arch_global_data arch; /* architecture-specific data */ + /** + * @cur_serial_dev: current serial device + */ + struct udevice *cur_serial_dev; + /** + * @arch: architecture-specific data + */ + struct arch_global_data arch; #ifdef CONFIG_CONSOLE_RECORD - struct membuff console_out; /* console output */ - struct membuff console_in; /* console input */ + /** + * @console_out: output buffer for console recording + * + * This buffer is used to collect output during console recording. + */ + struct membuff console_out; + /** + * @console_in: input buffer for console recording + * + * If console recording is activated, this buffer can be used to + * emulate input. + */ + struct membuff console_in; #endif #ifdef CONFIG_DM_VIDEO - ulong video_top; /* Top of video frame buffer area */ - ulong video_bottom; /* Bottom of video frame buffer area */ + /** + * @video_top: top of video frame buffer area + */ + ulong video_top; + /** + * @video_bottom: bottom of video frame buffer area + */ + ulong video_bottom; #endif #ifdef CONFIG_BOOTSTAGE - struct bootstage_data *bootstage; /* Bootstage information */ - struct bootstage_data *new_bootstage; /* Relocated bootstage info */ + /** + * @bootstage: boot stage information + */ + struct bootstage_data *bootstage; + /** + * @new_bootstage: relocated boot stage information + */ + struct bootstage_data *new_bootstage; #endif #ifdef CONFIG_LOG - int log_drop_count; /* Number of dropped log messages */ - int default_log_level; /* For devices with no filters */ - struct list_head log_head; /* List of struct log_device */ - int log_fmt; /* Mask containing log format info */ + /** + * @log_drop_count: number of dropped log messages + * + * This counter is incremented for each log message which can not + * be processed because logging is not yet available as signaled by + * flag %GD_FLG_LOG_READY in @flags. + */ + int log_drop_count; + /** + * @default_log_level: default logging level + * + * For logging devices without filters @default_log_level defines the + * logging level, cf. &enum log_level_t. + */ + int default_log_level; + /** + * @log_head: list of logging devices + */ + struct list_head log_head; + /** + * @log_fmt: bit mask for logging format + * + * The @log_fmt bit mask selects the fields to be shown in log messages. + * &enum log_fmt defines the bits of the bit mask. + */ + int log_fmt; + + /** + * @processing_msg: a log message is being processed + * + * This flag is used to suppress the creation of additional messages + * while another message is being processed. + */ + bool processing_msg; + /** + * @logc_prev: logging category of previous message + * + * This value is used as logging category for continuation messages. + */ + int logc_prev; + /** + * @logl_prev: logging level of the previous message + * + * This value is used as logging level for continuation messages. + */ + int logl_prev; #endif #if CONFIG_IS_ENABLED(BLOBLIST) - struct bloblist_hdr *bloblist; /* Bloblist information */ - struct bloblist_hdr *new_bloblist; /* Relocated blolist info */ + /** + * @bloblist: blob list information + */ + struct bloblist_hdr *bloblist; + /** + * @new_bloblist: relocated blob list information + */ + struct bloblist_hdr *new_bloblist; # ifdef CONFIG_SPL + /** + * @spl_handoff: SPL hand-off information + */ struct spl_handoff *spl_handoff; # endif #endif #if defined(CONFIG_TRANSLATION_OFFSET) - fdt_addr_t translation_offset; /* optional translation offset */ + /** + * @translation_offset: optional translation offset + * + * See CONFIG_TRANSLATION_OFFSET. + */ + fdt_addr_t translation_offset; #endif #if CONFIG_IS_ENABLED(WDT) + /** + * @watchdog_dev: watchdog device + */ struct udevice *watchdog_dev; #endif -} gd_t; -#endif +}; +/** + * gd_board_type() - retrieve board type + * + * Return: global board type + */ #ifdef CONFIG_BOARD_TYPES #define gd_board_type() gd->board_type #else #define gd_board_type() 0 #endif -/* - * Global Data Flags +/* These macros help avoid #ifdefs in the code */ +#if CONFIG_IS_ENABLED(OF_LIVE) +#define gd_of_root() gd->of_root +#define gd_of_root_ptr() &gd->of_root +#define gd_set_of_root(_root) gd->of_root = (_root) +#else +#define gd_of_root() NULL +#define gd_of_root_ptr() NULL +#define gd_set_of_root(_root) +#endif + +#if CONFIG_IS_ENABLED(OF_PLATDATA) +#define gd_set_dm_driver_rt(dyn) gd->dm_driver_rt = dyn +#define gd_dm_driver_rt() gd->dm_driver_rt +#else +#define gd_set_dm_driver_rt(dyn) +#define gd_dm_driver_rt() NULL +#endif + +/** + * enum gd_flags - global data flags + * + * See field flags of &struct global_data. */ -#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ -#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ -#define GD_FLG_SILENT 0x00004 /* Silent mode */ -#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */ -#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */ -#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */ -#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */ -#define GD_FLG_ENV_READY 0x00080 /* Env. imported into hash table */ -#define GD_FLG_SERIAL_READY 0x00100 /* Pre-reloc serial console ready */ -#define GD_FLG_FULL_MALLOC_INIT 0x00200 /* Full malloc() is ready */ -#define GD_FLG_SPL_INIT 0x00400 /* spl_init() has been called */ -#define GD_FLG_SKIP_RELOC 0x00800 /* Don't relocate */ -#define GD_FLG_RECORD 0x01000 /* Record console */ -#define GD_FLG_ENV_DEFAULT 0x02000 /* Default variable flag */ -#define GD_FLG_SPL_EARLY_INIT 0x04000 /* Early SPL init is done */ -#define GD_FLG_LOG_READY 0x08000 /* Log system is ready for use */ -#define GD_FLG_WDT_READY 0x10000 /* Watchdog is ready for use */ +enum gd_flags { + /** + * @GD_FLG_RELOC: code was relocated to RAM + */ + GD_FLG_RELOC = 0x00001, + /** + * @GD_FLG_DEVINIT: devices have been initialized + */ + GD_FLG_DEVINIT = 0x00002, + /** + * @GD_FLG_SILENT: silent mode + */ + GD_FLG_SILENT = 0x00004, + /** + * @GD_FLG_POSTFAIL: critical POST test failed + */ + GD_FLG_POSTFAIL = 0x00008, + /** + * @GD_FLG_POSTSTOP: POST sequence aborted + */ + GD_FLG_POSTSTOP = 0x00010, + /** + * @GD_FLG_LOGINIT: log Buffer has been initialized + */ + GD_FLG_LOGINIT = 0x00020, + /** + * @GD_FLG_DISABLE_CONSOLE: disable console (in & out) + */ + GD_FLG_DISABLE_CONSOLE = 0x00040, + /** + * @GD_FLG_ENV_READY: environment imported into hash table + */ + GD_FLG_ENV_READY = 0x00080, + /** + * @GD_FLG_SERIAL_READY: pre-relocation serial console ready + */ + GD_FLG_SERIAL_READY = 0x00100, + /** + * @GD_FLG_FULL_MALLOC_INIT: full malloc() is ready + */ + GD_FLG_FULL_MALLOC_INIT = 0x00200, + /** + * @GD_FLG_SPL_INIT: spl_init() has been called + */ + GD_FLG_SPL_INIT = 0x00400, + /** + * @GD_FLG_SKIP_RELOC: don't relocate + */ + GD_FLG_SKIP_RELOC = 0x00800, + /** + * @GD_FLG_RECORD: record console + */ + GD_FLG_RECORD = 0x01000, + /** + * @GD_FLG_ENV_DEFAULT: default variable flag + */ + GD_FLG_ENV_DEFAULT = 0x02000, + /** + * @GD_FLG_SPL_EARLY_INIT: early SPL initialization is done + */ + GD_FLG_SPL_EARLY_INIT = 0x04000, + /** + * @GD_FLG_LOG_READY: log system is ready for use + */ + GD_FLG_LOG_READY = 0x08000, + /** + * @GD_FLG_WDT_READY: watchdog is ready for use + */ + GD_FLG_WDT_READY = 0x10000, + /** + * @GD_FLG_SKIP_LL_INIT: don't perform low-level initialization + */ + GD_FLG_SKIP_LL_INIT = 0x20000, + /** + * @GD_FLG_SMP_READY: SMP initialization is complete + */ + GD_FLG_SMP_READY = 0x40000, +}; + +#endif /* __ASSEMBLY__ */ #endif /* __ASM_GENERIC_GBL_DATA_H */