X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=b1cb745d59e7a80274f14a54a781e6eff6db51da;hb=8fc78fc73b7f9d379913a503ecf4bd10af0011d8;hp=7c5012a67f0c07a95c5cd5ec32c11f1f51dffaf8;hpb=96b109ba7487d4ec1dfb27782d7408d415fc161d;p=platform%2Fkernel%2Fu-boot.git diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 7c5012a6..b1cb745 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -14,9 +14,48 @@ config DM_VIDEO option compiles in the video uclass and routes all LCD/video access through this. +config BACKLIGHT + bool "Enable panel backlight uclass support" + depends on DM_VIDEO + default y + help + This provides backlight uclass driver that enables basic panel + backlight support. + +config VIDEO_PCI_DEFAULT_FB_SIZE + hex "Default framebuffer size to use if no drivers request it" + depends on DM_VIDEO + default 0x1000000 if X86 && PCI + default 0 if !(X86 && PCI) + help + Generally, video drivers request the amount of memory they need for + the frame buffer when they are bound, by setting the size field in + struct video_uc_platdata. That memory is then reserved for use after + relocation. But PCI drivers cannot be bound before relocation unless + they are mentioned in the devicetree. + + With this value set appropriately, it is possible for PCI video + devices to have a framebuffer allocated by U-Boot. + + Note: the framebuffer needs to be large enough to store all pixels at + maximum resolution. For example, at 1920 x 1200 with 32 bits per + pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed. + +config VIDEO_COPY + bool "Enable copying the frame buffer to a hardware copy" + depends on DM_VIDEO + help + On some machines (e.g. x86), reading from the frame buffer is very + slow because it is uncached. To improve performance, this feature + allows the frame buffer to be kept in cached memory (allocated by + U-Boot) and then copied to the hardware frame-buffer as needed. + + To use this, your video driver must set @copy_base in + struct video_uc_platdata. + config BACKLIGHT_PWM bool "Generic PWM based Backlight Driver" - depends on DM_VIDEO && DM_PWM + depends on BACKLIGHT && DM_PWM default y help If you have a LCD backlight adjustable by PWM, say Y to enable @@ -27,7 +66,7 @@ config BACKLIGHT_PWM config BACKLIGHT_GPIO bool "Generic GPIO based Backlight Driver" - depends on DM_VIDEO + depends on BACKLIGHT help If you have a LCD backlight adjustable by GPIO, say Y to enable this driver. @@ -35,6 +74,14 @@ config BACKLIGHT_GPIO it understands the standard device tree (leds/backlight/gpio-backlight.txt) +config CMD_VIDCONSOLE + bool "Enable vidconsole commands lcdputs and setcurs" + depends on DM_VIDEO + default y + help + Enabling this will provide 'setcurs' and 'lcdputs' commands which + support cursor positioning and drawing strings on video framebuffer. + config VIDEO_BPP8 bool "Support 8-bit-per-pixel displays" depends on DM_VIDEO @@ -128,7 +175,7 @@ config CONSOLE_TRUETYPE_SIZE config SYS_WHITE_ON_BLACK bool "Display console as white on a black background" - default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || TEGRA || X86 || ARCH_SUNXI + default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || ARCH_TEGRA || X86 || ARCH_SUNXI help Normally the display is black on a white background, Enable this option to invert this, i.e. white on a black background. This can be @@ -143,17 +190,44 @@ config NO_FB_CLEAR loads takes over the screen. This, for example, can be used to keep splash image on screen until grub graphical boot menu starts. +config PANEL + bool "Enable panel uclass support" + depends on DM_VIDEO + default y + help + This provides panel uclass driver that enables basic panel support. + +config SIMPLE_PANEL + bool "Enable simple panel support" + depends on PANEL + default y + help + This turns on a simple panel driver that enables a compatible + video panel. + source "drivers/video/fonts/Kconfig" config VIDCONSOLE_AS_LCD - bool "Use 'vidconsole' when 'lcd' is seen in stdout" + bool "Use 'vidconsole' when CONFIG_VIDCONSOLE_AS_NAME string is seen in stdout" depends on DM_VIDEO help - This is a work-around for boards which have 'lcd' in their stdout - environment variable, but have moved to use driver model for video. - In this case the console will no-longer work. While it is possible - to update the environment, the breakage may be confusing for users. - This option will be removed around the end of 2016. + This is a work-around for boards which have 'lcd' or 'vga' in their + stdout environment variable, but have moved to use driver model for + video. In this case the console will no-longer work. While it is + possible to update the environment, the breakage may be confusing for + users. This option will be removed around the end of 2020. + +config VIDCONSOLE_AS_NAME + string "Use 'vidconsole' when string defined here is seen in stdout" + depends on VIDCONSOLE_AS_LCD + default "lcd" if LCD || TEGRA_COMMON + default "vga" if !LCD + help + This is a work-around for boards which have 'lcd' or 'vga' in their + stdout environment variable, but have moved to use driver model for + video. In this case the console will no-longer work. While it is + possible to update the environment, the breakage may be confusing for + users. This option will be removed around the end of 2020. config VIDEO_COREBOOT bool "Enable coreboot framebuffer driver support" @@ -469,13 +543,11 @@ config NXP_TDA19988 config ATMEL_HLCD bool "Enable ATMEL video support using HLCDC" - depends on DM_VIDEO help HLCDC supports video output to an attached LCD panel. config AM335X_LCD bool "Enable AM335x video support" - depends on DM_VIDEO help Supports video output to an attached LCD panel. @@ -572,6 +644,16 @@ source "drivers/video/bridge/Kconfig" source "drivers/video/imx/Kconfig" +config VIDEO_NX + bool "Enable video support on Nexell SoC" + depends on ARCH_S5P6818 || ARCH_S5P4418 + help + Nexell SoC supports many video output options including eDP and + HDMI. This option enables this support which can be used on devices + which have an eDP display connected. + +source "drivers/video/nexell/Kconfig" + config VIDEO bool "Enable legacy video support" depends on !DM_VIDEO @@ -772,4 +854,122 @@ config IHS_VIDEO_OUT out On-screen Display (OSD) used on gdsys FPGAs to control dynamic textual overlays of the display outputs. +config SPLASH_SCREEN + bool "Show a splash-screen image" + help + If this option is set, the environment is checked for a variable + "splashimage". If found, the usual display of logo, copyright and + system information on the LCD is suppressed and the BMP image at the + address specified in "splashimage" is loaded instead. The console is + redirected to the "nulldev", too. This allows for a "silent" boot + where a splash screen is loaded very quickly after power-on. + + The splash_screen_prepare() function is a weak function defined in + common/splash.c. It is called as part of the splash screen display + sequence. It gives the board an opportunity to prepare the splash + image data before it is processed and sent to the frame buffer by + U-Boot. Define your own version to use this feature. + +config SPLASHIMAGE_GUARD + bool "Support unaligned BMP images" + depends on SPLASH_SCREEN + help + If this option is set, then U-Boot will prevent the environment + variable "splashimage" from being set to a problematic address + (see doc/README.displaying-bmps). + + This option is useful for targets where, due to alignment + restrictions, an improperly aligned BMP image will cause a data + abort. If you think you will not have problems with unaligned + accesses (for example because your toolchain prevents them) + there is no need to set this option. + +config SPLASH_SCREEN_ALIGN + bool "Allow positioning the splash image anywhere on the display" + depends on SPLASH_SCREEN || CMD_BMP + help + If this option is set the splash image can be freely positioned + on the screen. Environment variable "splashpos" specifies the + position as "x,y". If a positive number is given it is used as + number of pixel from left/top. If a negative number is given it + is used as number of pixel from right/bottom. You can also + specify 'm' for centering the image. + + Example: + setenv splashpos m,m + => image at center of screen + + setenv splashpos 30,20 + => image at x = 30 and y = 20 + + setenv splashpos -10,m + => vertically centered image + at x = dspWidth - bmpWidth - 9 + +config SPLASH_SOURCE + bool "Control the source of the splash image" + depends on SPLASH_SCREEN + help + Use the splash_source.c library. This library provides facilities to + declare board specific splash image locations, routines for loading + splash image from supported locations, and a way of controlling the + selected splash location using the "splashsource" environment + variable. + + This CONFIG works as follows: + + - If splashsource is set to a supported location name as defined by + board code, use that splash location. + - If splashsource is undefined, use the first splash location as + default. + - If splashsource is set to an unsupported value, do not load a splash + screen. + + A splash source location can describe either storage with raw data, a + storage formatted with a file system or a FIT image. In case of a + filesystem, the splash screen data is loaded as a file. The name of + the splash screen file can be controlled with the environment variable + "splashfile". + + To enable loading the splash image from a FIT image, CONFIG_FIT must + be enabled. The FIT image has to start at the 'offset' field address + in the selected splash location. The name of splash image within the + FIT shall be specified by the environment variable "splashfile". + + In case the environment variable "splashfile" is not defined the + default name 'splash.bmp' will be used. + +config VIDEO_BMP_GZIP + bool "Gzip compressed BMP image support" + depends on CMD_BMP || SPLASH_SCREEN + help + If this option is set, additionally to standard BMP + images, gzipped BMP images can be displayed via the + splashscreen support or the bmp command. + +config VIDEO_BMP_RLE8 + bool "Run length encoded BMP image (RLE8) support" + depends on DM_VIDEO || CFB_CONSOLE + help + If this option is set, the 8-bit RLE compressed BMP images + is supported. + +config BMP_16BPP + bool "16-bit-per-pixel BMP image support" + depends on DM_VIDEO || LCD + help + Support display of bitmaps file with 16-bit-per-pixel + +config BMP_24BPP + bool "24-bit-per-pixel BMP image support" + depends on DM_VIDEO || LCD + help + Support display of bitmaps file with 24-bit-per-pixel. + +config BMP_32BPP + bool "32-bit-per-pixel BMP image support" + depends on DM_VIDEO || LCD + help + Support display of bitmaps file with 32-bit-per-pixel. + endmenu