X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fpower%2FKconfig;h=26257a72bc699fe0899a25b3eec1994618f02f03;hb=b4c2c151b14b59a2403675526adf666710cade67;hp=cb2c6fe3ebe4bf2ac31ad7a40f15840023606f92;hpb=c0912f9bbfb26dd03d189953678691b799d35b6e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index cb2c6fe..26257a7 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -13,8 +13,9 @@ choice
 	depends on ARCH_SUNXI
 	default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
+	default AXP305_POWER if MACH_SUN50I_H616
 	default AXP818_POWER if MACH_SUN8I_A83T
-	default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I
+	default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S
 
 config SUNXI_NO_PMIC
 	bool "board without a pmic"
@@ -32,7 +33,7 @@ config AXP152_POWER
 
 config AXP209_POWER
 	bool "axp209 pmic support"
-	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_V3S
 	select AXP_PMIC_BUS
 	select CMD_POWEROFF
 	---help---
@@ -48,6 +49,15 @@ config AXP221_POWER
 	Select this to enable support for the axp221/axp223 pmic found on most
 	A23 and A31 boards.
 
+config AXP305_POWER
+	bool "axp305 pmic support"
+	depends on MACH_SUN50I_H616
+	select AXP_PMIC_BUS
+	select CMD_POWEROFF
+	---help---
+	Select this to enable support for the axp305 pmic found on most
+	H616 boards.
+
 config AXP809_POWER
 	bool "axp809 pmic support"
 	depends on MACH_SUN9I
@@ -127,11 +137,12 @@ config AXP_DCDC3_VOLT
 
 config AXP_DCDC4_VOLT
 	int "axp pmic dcdc4 voltage"
-	depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+	depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP305_POWER
 	default 1250 if AXP152_POWER
 	default 1200 if MACH_SUN6I
 	default 0 if MACH_SUN8I
 	default 900 if MACH_SUN9I
+	default 1500 if AXP305_POWER
 	---help---
 	Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
 	disable dcdc4.
@@ -140,6 +151,7 @@ config AXP_DCDC4_VOLT
 	On A23 / A33 boards dcdc4 is unused and should be disabled.
 	On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
 	On A83T boards dcdc4 is used for VDD-GPU.
+	On H616 boards dcdcd is used for VCC-DRAM.
 
 config AXP_DCDC5_VOLT
 	int "axp pmic dcdc5 voltage"
@@ -236,7 +248,6 @@ endchoice
 config AXP_ALDO3_INRUSH_QUIRK
 	bool "axp pmic (a)ldo3 inrush quirk"
 	depends on AXP209_POWER
-	default n
 	---help---
 	The reference design denotes a value of 4.7 uF for the output capacitor
 	of LDO3. Some boards have too high capacitance causing 	an inrush current
@@ -345,7 +356,6 @@ config AXP_FLDO3_VOLT
 config AXP_SW_ON
 	bool "axp pmic sw on"
 	depends on AXP809_POWER || AXP818_POWER
-	default n
 	---help---
 	Enable to turn on axp pmic sw.
 
@@ -366,4 +376,11 @@ config TWL4030_POWER
 	The TWL4030 in a combination audio CODEC/power management with
 	GPIO and it is commonly used with the OMAP3 family of processors
 
+config POWER_MT6323
+	bool "Poweroff driver for mediatek mt6323"
+	select CMD_POWEROFF
+	help
+	  This adds poweroff driver for mt6323
+	  this pmic is used on mt7623 / Bananapi R2
+
 endmenu