X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fpci%2FKconfig;h=429bb836a8a041146ec92b338ba566f2d03d9b2e;hb=c18b103657d9541305a45a1fb21f979c317fba49;hp=b8376b4f47bf315b542d9e050a3cffb45d8f4dd0;hpb=4f892924d238cc415891dbea336a0fdaff2f853b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index b8376b4..429bb83 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -1,6 +1,6 @@
 menuconfig PCI
 	bool "PCI support"
-	default y if PPC || X86
+	default y if PPC
 	help
 	  Enable support for PCI (Peripheral Interconnect Bus), a type of bus
 	  used on some devices to allow the CPU to communicate with its
@@ -9,7 +9,7 @@ menuconfig PCI
 if PCI
 
 config DM_PCI
-	bool "Enable driver mode for PCI"
+	bool "Enable driver model for PCI"
 	depends on DM
 	help
 	  Use driver model for PCI. Driver model is the new method for
@@ -26,6 +26,16 @@ config DM_PCI_COMPAT
 	  measure when porting a board to use driver model for PCI. Once the
 	  board is fully supported, this option should be disabled.
 
+config PCI_AARDVARK
+	bool "Enable Aardvark PCIe driver"
+	default n
+	depends on DM_PCI
+	depends on ARMADA_3700
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  Armada37x0 SoCs. The PCIe controller on Armada37x0 is based on
+	  Aardvark hardware.
+
 config PCI_PNP
 	bool "Enable Plug & Play support for PCI"
 	depends on PCI || DM_PCI
@@ -33,6 +43,40 @@ config PCI_PNP
 	help
 	  Enable PCI memory and I/O space resource allocation and assignment.
 
+config PCIE_ECAM_GENERIC
+	bool "Generic ECAM-based PCI host controller support"
+	default n
+	depends on DM_PCI
+	help
+	  Say Y here if you want to enable support for generic ECAM-based
+	  PCIe host controllers, such as the one emulated by QEMU.
+
+config PCIE_DW_MVEBU
+	bool "Enable Armada-8K PCIe driver (DesignWare core)"
+	depends on DM_PCI
+	depends on ARMADA_8K
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
+	  DesignWare hardware.
+
+config PCI_RCAR_GEN2
+	bool "Renesas RCar Gen2 PCIe driver"
+	depends on DM_PCI
+	depends on RCAR_32
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  Renesas RCar Gen2 SoCs. The PCIe controller on RCar Gen2 is
+	  also used to access EHCI USB controller on the SoC.
+
+config PCI_RCAR_GEN3
+	bool "Renesas RCar Gen3 PCIe driver"
+	depends on DM_PCI
+	depends on RCAR_GEN3
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  Renesas RCar Gen3 SoCs.
+
 config PCI_SANDBOX
 	bool "Sandbox PCI support"
 	depends on SANDBOX && DM_PCI
@@ -61,4 +105,36 @@ config PCI_XILINX
 	  Enable support for the Xilinx AXI bridge for PCI express, an IP block
 	  which can be used on some generations of Xilinx FPGAs.
 
+config PCIE_LAYERSCAPE
+	bool "Layerscape PCIe support"
+	depends on DM_PCI
+	help
+	  Support Layerscape PCIe. The Layerscape SoC may have one or several
+	  PCIe controllers. The PCIe may works in RC or EP mode according to
+	  RCW[HOST_AGT_PEX] setting.
+
+config PCIE_LAYERSCAPE_GEN4
+	bool "Layerscape Gen4 PCIe support"
+	depends on DM_PCI
+	help
+	  Support PCIe Gen4 on NXP Layerscape SoCs, which may have one or
+	  several PCIe controllers. The PCIe controller can work in RC or
+	  EP mode according to RCW[HOST_AGT_PEX] setting.
+
+config PCIE_INTEL_FPGA
+	bool "Intel FPGA PCIe support"
+	depends on DM_PCI
+	help
+	  Say Y here if you want to enable PCIe controller support on Intel
+	  FPGA, example Stratix 10.
+
+config PCI_MVEBU
+	bool "Enable Armada XP/38x PCIe driver"
+	depends on ARCH_MVEBU
+	select DM_PCI
+	select MISC
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  Armada XP/38x SoCs.
+
 endif