X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fmmc%2FKconfig;h=ff987ed80369ff32aee5b8042713cb1eb348a3ad;hb=095c9f35d5a04ed0907624479f702f6fce7591bb;hp=ab0627a8afb120035cf16053b76d42f780973541;hpb=8e9801c283c0e5a7ccd5c04f5ba09003d01f1591;p=platform%2Fkernel%2Fu-boot.git

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index ab0627a..ff987ed 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -3,6 +3,7 @@ menu "MMC Host controller Support"
 config MMC
 	bool "MMC/SD/SDIO card support"
 	default ARM || PPC || SANDBOX
+	select HAVE_BLOCK_DEVICE
 	help
 	  This selects MultiMediaCard, Secure Digital and Secure
 	  Digital I/O support.
@@ -17,6 +18,11 @@ config MMC_WRITE
 	help
 	  Enable write access to MMC and SD Cards
 
+config MMC_BROKEN_CD
+	bool "Poll for broken card detection case"
+	help
+	  If card  detection feature is broken, just poll to detect.
+
 config DM_MMC
 	bool "Enable MMC controllers using Driver Model"
 	depends on DM
@@ -204,6 +210,10 @@ config MMC_MXC
 
 config MMC_MXS
 	bool "Freescale MXS Multimedia Card Interface support"
+	depends on MX23 || MX28 || MX6 || MX7
+	select APBH_DMA
+	select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
+	select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
 	help
 	  This selects the Freescale SSP MMC controller found on MXS based
 	  platforms like mx23/28.
@@ -229,6 +239,15 @@ config MMC_OMAP_HS
 
 	  If unsure, say N.
 
+config MMC_OMAP_HS_ADMA
+	bool "ADMA support for OMAP HS MMC"
+	depends on MMC_OMAP_HS && !OMAP34XX
+	default y if !AM33XX
+	help
+	  This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
+	  controller). If supported by the hardware, selecting this option will
+	  increase performances.
+
 config MMC_OMAP36XX_PINS
 	bool "Enable MMC1 on OMAP36xx/37xx"
 	depends on OMAP34XX && MMC_OMAP_HS
@@ -256,6 +275,20 @@ config MMC_UNIPHIER
 	  This selects support for the Matsushita SD/MMC Host Controller on
 	  SocioNext UniPhier and Renesas RCar SoCs.
 
+config MMC_BCM2835
+	bool "BCM2835 family custom SD/MMC Host Controller support"
+	depends on ARCH_BCM283X
+	depends on BLK && DM_MMC
+	depends on OF_CONTROL
+	default y
+	help
+	  This selects support for the custom SD host controller in the BCM2835
+	  family of devices.
+
+	  If you have a BCM2835 platform with SD or MMC devices, say Y here.
+
+	  If unsure, say N.
+
 config MMC_SANDBOX
 	bool "Sandbox MMC support"
 	depends on SANDBOX
@@ -448,6 +481,19 @@ config MMC_SDHCI_ZYNQ
 	help
 	  Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
 
+config ZYNQ_SDHCI_MAX_FREQ
+	int "Set the maximum frequency of the controller"
+	depends on MMC_SDHCI_ZYNQ
+	help
+	  Set the maximum frequency of the controller.
+
+config ZYNQ_SDHCI_MIN_FREQ
+	int "Set the minimum frequency of the controller"
+	depends on MMC_SDHCI_ZYNQ
+	default 0
+	help
+	  Set the minimum frequency of the controller.
+
 config MMC_SUNXI
 	bool "Allwinner sunxi SD/MMC Host Controller support"
 	depends on ARCH_SUNXI && !UART0_PORT_F
@@ -489,6 +535,13 @@ config FTSDC010
 	help
 	  This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
 
+config FTSDC010_SDIO
+	bool "Support ftsdc010 sdio"
+	default n
+	depends on FTSDC010
+	help
+		This can enable ftsdc010 sdio function.
+
 endif
 
 config TEGRA124_MMC_DISABLE_EXT_LOOPBACK