X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fmmc%2FKconfig;h=fbd13964a0842b9a40963a2b8511876f69281956;hb=9450ab2ba8d720bd9f73bccc0af2e2b5a2c2aaf1;hp=693b3ceaf007bc83dc35a5393f9c8d51f6f22ca8;hpb=8ada17dde84954e36d8bc6ff62a6956686eb0ec4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 693b3ce..fbd1396 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -111,6 +111,19 @@ config SPL_MMC_UHS_SUPPORT
 	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
 	  frequency can go up to 208MHz (SDR104)
 
+config MMC_HS400_SUPPORT
+	bool "enable HS400 support"
+	select MMC_HS200_SUPPORT
+	help
+	  The HS400 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+config SPL_MMC_HS400_SUPPORT
+	bool "enable HS400 support in SPL"
+	help
+	  The HS400 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
 config MMC_HS200_SUPPORT
 	bool "enable HS200 support"
 	help
@@ -379,6 +392,17 @@ config MMC_SDHCI_BCM2835
 
 	  If unsure, say N.
 
+config MMC_SDHCI_BCMSTB
+	tristate "SDHCI support for the BCMSTB SD/MMC Controller"
+	depends on MMC_SDHCI
+	help
+	  This selects the Broadcom set-top box SD/MMC controller.
+
+	  If you have a BCMSTB platform with SD or MMC devices,
+	  say Y here.
+
+	  If unsure, say N.
+
 config MMC_SDHCI_CADENCE
 	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
 	depends on BLK && DM_MMC
@@ -391,6 +415,15 @@ config MMC_SDHCI_CADENCE
 
 	  If unsure, say N.
 
+config MMC_SDHCI_K3_ARASAN
+	bool "Arasan SDHCI controller for TI's K3 based SoCs"
+	depends on ARCH_K3
+	depends on MMC_SDHCI
+	depends on DM_MMC && OF_CONTROL && BLK
+	help
+	  Support for Arasan SDHCI host controller on Texas Instruments'
+	  K3 family based SoC platforms
+
 config MMC_SDHCI_KONA
 	bool "SDHCI support on Broadcom KONA platform"
 	depends on MMC_SDHCI
@@ -505,7 +538,7 @@ config MMC_SDHCI_TEGRA
 
 config MMC_SDHCI_ZYNQ
 	bool "Arasan SDHCI controller support"
-	depends on ARCH_ZYNQ || ARCH_ZYNQMP
+	depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
 	depends on DM_MMC && OF_CONTROL && BLK
 	depends on MMC_SDHCI
 	help
@@ -536,6 +569,10 @@ config MMC_SUNXI_HAS_NEW_MODE
 	bool
 	depends on MMC_SUNXI
 
+config MMC_SUNXI_HAS_MODE_SWITCH
+	bool
+	depends on MMC_SUNXI
+
 config GENERIC_ATMEL_MCI
 	bool "Atmel Multimedia Card Interface support"
 	depends on DM_MMC && BLK && ARCH_AT91
@@ -565,6 +602,17 @@ config FTSDC010_SDIO
 	help
 		This can enable ftsdc010 sdio function.
 
+config MMC_MTK
+	bool "MediaTek SD/MMC Card Interface support"
+	depends on ARCH_MEDIATEK
+	depends on BLK && DM_MMC
+	depends on OF_CONTROL
+	help
+	  This selects the MediaTek(R) Secure digital and Multimedia card Interface.
+	  If you have a machine with a integrated SD/MMC card reader, say Y or M here.
+	  This is needed if support for any SD/SDIO/MMC devices is required.
+	  If unsure, say N.
+
 endif
 
 config TEGRA124_MMC_DISABLE_EXT_LOOPBACK