X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fmmc%2FKconfig;h=51a87cdd77dc1e3c2419ff7960d622ae6ebeaa50;hb=1612ff0dfba57b1002d8c7a54778eb553ace98f4;hp=520e7ea182275658f06b6c8dacdb205b3804ac3d;hpb=1b8587706036122a99734a512946b7e038a4851d;p=platform%2Fkernel%2Fu-boot.git diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 520e7ea..377b1c4 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -3,6 +3,7 @@ menu "MMC Host controller Support" config MMC bool "MMC/SD/SDIO card support" default ARM || PPC || SANDBOX + select HAVE_BLOCK_DEVICE help This selects MultiMediaCard, Secure Digital and Secure Digital I/O support. @@ -10,9 +11,17 @@ config MMC If you want MMC/SD/SDIO support, you should say Y here and also to your specific host controller driver. -config GENERIC_MMC - bool "Generic MMC driver framework" - default MMC +config MMC_WRITE + bool "support for MMC/SD write operations" + depends on MMC + default y + help + Enable write access to MMC and SD Cards + +config MMC_BROKEN_CD + bool "Poll for broken card detection case" + help + If card detection feature is broken, just poll to detect. config DM_MMC bool "Enable MMC controllers using Driver Model" @@ -24,18 +33,112 @@ config DM_MMC appear as block devices in U-Boot and can support filesystems such as EXT4 and FAT. -config DM_MMC_OPS - bool "Support MMC controller operations using Driver Model" - depends on DM_MMC - default y if DM_MMC +config SPL_DM_MMC + bool "Enable MMC controllers using Driver Model in SPL" + depends on SPL_DM && DM_MMC + default y help - Driver model provides a means of supporting device operations. This - option moves MMC operations under the control of driver model. The - option will be removed as soon as all DM_MMC drivers use it, as it - will the only supported behaviour. + This enables the MultiMediaCard (MMC) uclass which supports MMC and + Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) + and non-removable (e.g. eMMC chip) devices are supported. These + appear as block devices in U-Boot and can support filesystems such + as EXT4 and FAT. if MMC +config ARM_PL180_MMCI + bool "ARM AMBA Multimedia Card Interface and compatible support" + depends on DM_MMC && OF_CONTROL + help + This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card + Interface (PL180, PL181 and compatible) support. + If you have an ARM(R) platform with a Multimedia Card slot, + say Y or M here. + +config MMC_QUIRKS + bool "Enable quirks" + default y + help + Some cards and hosts may sometimes behave unexpectedly (quirks). + This option enable workarounds to handle those quirks. Some of them + are enabled by default, other may require additionnal flags or are + enabled by the host driver. + +config MMC_HW_PARTITIONING + bool "Support for HW partitioning command(eMMC)" + default y + help + This adds a command and an API to do hardware partitioning on eMMC + devices. + +config SUPPORT_EMMC_RPMB + bool "Support eMMC replay protected memory block (RPMB)" + imply CMD_MMC_RPMB + help + Enable support for reading, writing and programming the + key for the Replay Protection Memory Block partition in eMMC. + +config MMC_IO_VOLTAGE + bool "Support IO voltage configuration" + help + IO voltage configuration allows selecting the voltage level of the IO + lines (not the level of main supply). This is required for UHS + support. For eMMC this not mandatory, but not enabling this option may + prevent the driver of using the faster modes. + +config SPL_MMC_IO_VOLTAGE + bool "Support IO voltage configuration in SPL" + default n + help + IO voltage configuration allows selecting the voltage level of the IO + lines (not the level of main supply). This is required for UHS + support. For eMMC this not mandatory, but not enabling this option may + prevent the driver of using the faster modes. + +config MMC_UHS_SUPPORT + bool "enable UHS support" + depends on MMC_IO_VOLTAGE + help + The Ultra High Speed (UHS) bus is available on some SDHC and SDXC + cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus + frequency can go up to 208MHz (SDR104) + +config SPL_MMC_UHS_SUPPORT + bool "enable UHS support in SPL" + depends on SPL_MMC_IO_VOLTAGE + help + The Ultra High Speed (UHS) bus is available on some SDHC and SDXC + cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus + frequency can go up to 208MHz (SDR104) + +config MMC_HS200_SUPPORT + bool "enable HS200 support" + help + The HS200 mode is support by some eMMC. The bus frequency is up to + 200MHz. This mode requires tuning the IO. + + +config SPL_MMC_HS200_SUPPORT + bool "enable HS200 support in SPL" + help + The HS200 mode is support by some eMMC. The bus frequency is up to + 200MHz. This mode requires tuning the IO. + +config MMC_VERBOSE + bool "Output more information about the MMC" + default y + help + Enable the output of more information about the card such as the + operating mode. + +config MMC_TRACE + bool "MMC debugging" + default n + help + This is an option for use by developer. Enable MMC core debugging. + + If you need to see the MMC core message, say Y. + config SPL_MMC_TINY bool "Tiny MMC framework in SPL" help @@ -51,17 +154,6 @@ config SPL_MMC_TINY operations too, which can remove the need for malloc support in SPL and thus further reduce footprint. -config ATMEL_SDHCI - bool "Atmel SDHCI controller support" - depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91 - depends on MMC_SDHCI - help - This enables support for the Atmel SDHCI controller, which supports - the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD - Memory Card Specification V3.0, and the SDIO V3.0 specification. - It is compliant with the SD Host Controller Standard V3.0 - specification. - config MMC_DAVINCI bool "TI DAVINCI Multimedia Card Interface support" depends on ARCH_DAVINCI @@ -116,6 +208,12 @@ config MMC_DW_SOCFPGA Synopsys DesignWare Memory Card Interface driver. Select this option for platforms based on Altera SOCFPGA. +config MMC_MESON_GX + bool "Meson GX EMMC controller support" + depends on DM_MMC && BLK && ARCH_MESON + help + Support for EMMC host controller on Meson GX ARM SoCs platform (S905) + config MMC_MXC bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" help @@ -127,14 +225,28 @@ config MMC_MXC config MMC_MXS bool "Freescale MXS Multimedia Card Interface support" + depends on MX23 || MX28 || MX6 || MX7 + select APBH_DMA + select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 + select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 help This selects the Freescale SSP MMC controller found on MXS based platforms like mx23/28. If unsure, say N. +config MMC_PCI + bool "Support for MMC controllers on PCI" + help + This selects PCI-based MMC controllers. + If you have an MMC controller on a PCI bus, say Y here. + + If unsure, say N. + config MMC_OMAP_HS bool "TI OMAP High Speed Multimedia Card Interface support" + select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR + select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR help This selects the TI OMAP High Speed Multimedia card Interface. If you have an omap2plus board with a Multimedia Card slot, @@ -142,24 +254,75 @@ config MMC_OMAP_HS If unsure, say N. +config MMC_OMAP_HS_ADMA + bool "ADMA support for OMAP HS MMC" + depends on MMC_OMAP_HS && !OMAP34XX + default y if !AM33XX + help + This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA + controller). If supported by the hardware, selecting this option will + increase performances. + +config MMC_OMAP36XX_PINS + bool "Enable MMC1 on OMAP36xx/37xx" + depends on OMAP34XX && MMC_OMAP_HS + help + This enables extended-drain in the MMC/SD/SDIO1I/O and + GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129) + specific to the OMAP36xx/37xx using MMC1 + + If you have a controller with this interface, say Y here. + + If unsure, say N. + config SH_SDHI bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support" - depends on RMOBILE + depends on ARCH_RMOBILE help Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform +config SH_MMCIF + bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support" + depends on ARCH_RMOBILE || SH + help + Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform + config MMC_UNIPHIER bool "UniPhier SD/MMC Host Controller support" depends on ARCH_UNIPHIER - depends on BLK && DM_MMC_OPS + depends on BLK && DM_MMC + depends on OF_CONTROL + help + This selects support for the Matsushita SD/MMC Host Controller on + SocioNext UniPhier SoCs. + +config RENESAS_SDHI + bool "Renesas R-Car SD/MMC Host Controller support" + depends on ARCH_RMOBILE + depends on BLK && DM_MMC depends on OF_CONTROL help - This selects support for the SD/MMC Host Controller on UniPhier SoCs. + This selects support for the Matsushita SD/MMC Host Controller on + Renesas R-Car SoCs. + +config MMC_BCM2835 + bool "BCM2835 family custom SD/MMC Host Controller support" + depends on ARCH_BCM283X + depends on BLK && DM_MMC + depends on OF_CONTROL + default y + help + This selects support for the custom SD host controller in the BCM2835 + family of devices. + + If you have a BCM2835 platform with SD or MMC devices, say Y here. + + If unsure, say N. config MMC_SANDBOX bool "Sandbox MMC support" depends on SANDBOX - depends on BLK && DM_MMC_OPS && OF_CONTROL + depends on BLK && DM_MMC && OF_CONTROL help This select a dummy sandbox MMC driver. At present this does nothing other than allow sandbox to be build with MMC support. This @@ -191,6 +354,18 @@ config MMC_SDHCI_SDMA This enables support for the SDMA (Single Operation DMA) defined in the SD Host Controller Standard Specification Version 1.00 . +config MMC_SDHCI_ATMEL + bool "Atmel SDHCI controller support" + depends on ARCH_AT91 + depends on DM_MMC && BLK && ARCH_AT91 + depends on MMC_SDHCI + help + This enables support for the Atmel SDHCI controller, which supports + the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD + Memory Card Specification V3.0, and the SDIO V3.0 specification. + It is compliant with the SD Host Controller Standard V3.0 + specification. + config MMC_SDHCI_BCM2835 tristate "SDHCI support for the BCM2835 SD/MMC Controller" depends on ARCH_BCM283X @@ -204,9 +379,20 @@ config MMC_SDHCI_BCM2835 If unsure, say N. +config MMC_SDHCI_BCMSTB + tristate "SDHCI support for the BCMSTB SD/MMC Controller" + depends on MMC_SDHCI + help + This selects the Broadcom set-top box SD/MMC controller. + + If you have a BCMSTB platform with SD or MMC devices, + say Y here. + + If unsure, say N. + config MMC_SDHCI_CADENCE bool "SDHCI support for the Cadence SD/SDIO/eMMC controller" - depends on BLK && DM_MMC_OPS + depends on BLK && DM_MMC depends on MMC_SDHCI depends on OF_CONTROL help @@ -228,7 +414,7 @@ config MMC_SDHCI_KONA config MMC_SDHCI_MSM bool "Qualcomm SDHCI controller" - depends on BLK && DM_MMC_OPS + depends on BLK && DM_MMC depends on MMC_SDHCI help Enables support for SDHCI 2.0 controller present on some Qualcomm @@ -258,7 +444,7 @@ config MMC_SDHCI_PIC32 config MMC_SDHCI_ROCKCHIP bool "Arasan SDHCI controller for Rockchip support" depends on ARCH_ROCKCHIP - depends on DM_MMC && BLK && DM_MMC_OPS + depends on DM_MMC && BLK depends on MMC_SDHCI help Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform @@ -286,6 +472,13 @@ config MMC_SDHCI_SPEAR If unsure, say N. +config MMC_SDHCI_STI + bool "SDHCI support for STMicroelectronics SoC" + depends on MMC_SDHCI && OF_CONTROL + help + This selects the Secure Digital Host Controller Interface (SDHCI) + on STMicroelectronics STiH410 SoC. + config MMC_SDHCI_XENON bool "SDHCI support for the Xenon SDHCI controller" depends on MMC_SDHCI && DM_MMC && OF_CONTROL @@ -297,6 +490,20 @@ config MMC_SDHCI_XENON If unsure, say N. +config MMC_SDHCI_TANGIER + bool "Tangier SDHCI controller support" + depends on DM_MMC && BLK + depends on MMC_SDHCI + help + This selects support for SDHCI controller on Tanginer + SoC. Note that this controller does not sit on PCI bus and, + hence, cannot be enumerated by standard PCI means. + + If you're using an Intel Tangier SoC (available on Intel + Edison board), say Y here. + + If unsure, say N. + config MMC_SDHCI_TEGRA bool "SDHCI platform support for the Tegra SD/MMC Controller" depends on TEGRA @@ -310,11 +517,24 @@ config MMC_SDHCI_TEGRA config MMC_SDHCI_ZYNQ bool "Arasan SDHCI controller support" depends on ARCH_ZYNQ || ARCH_ZYNQMP - depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS + depends on DM_MMC && OF_CONTROL && BLK depends on MMC_SDHCI help Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform +config ZYNQ_SDHCI_MAX_FREQ + int "Set the maximum frequency of the controller" + depends on MMC_SDHCI_ZYNQ + help + Set the maximum frequency of the controller. + +config ZYNQ_SDHCI_MIN_FREQ + int "Set the minimum frequency of the controller" + depends on MMC_SDHCI_ZYNQ + default 0 + help + Set the minimum frequency of the controller. + config MMC_SUNXI bool "Allwinner sunxi SD/MMC Host Controller support" depends on ARCH_SUNXI && !UART0_PORT_F @@ -323,8 +543,58 @@ config MMC_SUNXI This selects support for the SD/MMC Host Controller on Allwinner sunxi SoCs. +config MMC_SUNXI_HAS_NEW_MODE + bool + depends on MMC_SUNXI + +config GENERIC_ATMEL_MCI + bool "Atmel Multimedia Card Interface support" + depends on DM_MMC && BLK && ARCH_AT91 + help + This enables support for Atmel High Speed Multimedia Card Interface + (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3, + the SD Memory Card Specification V2.0, the SDIO V2.0 specification + and CE-ATA V1.1. + +config STM32_SDMMC2 + bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" + depends on DM_MMC && BLK && OF_CONTROL + help + This selects support for the SD/MMC controller on STM32H7 SoCs. + If you have a board based on such a SoC and with a SD/MMC slot, + say Y or M here. + +config FTSDC010 + bool "Ftsdc010 SD/MMC controller Support" + help + This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP. + +config FTSDC010_SDIO + bool "Support ftsdc010 sdio" + default n + depends on FTSDC010 + help + This can enable ftsdc010 sdio function. + endif +config TEGRA124_MMC_DISABLE_EXT_LOOPBACK + bool "Disable external clock loopback" + depends on MMC_SDHCI_TEGRA && TEGRA124 + help + Disable the external clock loopback and use the internal one on SDMMC3 + as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits + being set to 0xfffd according to the TRM. + + TODO(marcel.ziswiler@toradex.com): Move to device tree controlled + approach once proper kernel integration made it mainline. + +config FSL_ESDHC + bool "Freescale/NXP eSDHC controller support" + help + This selects support for the eSDHC (enhanced secure digital host + controller) found on numerous Freescale/NXP SoCs. + endmenu config SYS_FSL_ERRATUM_ESDHC111