X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fide%2Fit8213.c;h=492c07d5f4f32962f4fd3bea7ea8900f046fa633;hb=e085b3cae85af47eb0a3eda3186bd898310fb322;hp=d7969b6d139e2eac75fbe181652b7608cc2a5abf;hpb=33dbe6114047496a5b6fee0941c52dad41250043;p=platform%2Fkernel%2Flinux-starfive.git

diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c
index d7969b6..492c07d 100644
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -17,15 +17,14 @@
 
 /**
  *	it8213_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Set the interface PIO mode.
  */
 
-static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int is_slave		= drive->dn & 1;
 	int master_port		= 0x40;
@@ -35,6 +34,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	u8 slave_data;
 	static DEFINE_SPINLOCK(tune_lock);
 	int control = 0;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	static const u8 timings[][2] = {
 					{ 0, 0 },
@@ -50,7 +50,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media != ide_disk)
 		control |= 4;	/* ATAPI */
-	if (pio > 2)
+	if (ide_pio_need_iordy(drive, pio))
 		control |= 2;	/* IORDY */
 	if (is_slave) {
 		master_data |=  0x4000;
@@ -120,7 +120,6 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
 	} else {
 		const u8 mwdma_to_pio[] = { 0, 3, 4 };
-		u8 pio;
 
 		if (reg48 & u_flag)
 			pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
@@ -132,11 +131,12 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
 
 		if (speed >= XFER_MW_DMA_0)
-			pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
+			drive->pio_mode =
+				mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
 		else
-			pio = 2; /* only SWDMA2 is allowed */
+			drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
 
-		it8213_set_pio_mode(drive, pio);
+		it8213_set_pio_mode(hwif, drive);
 	}
 }