X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fi2c%2Fdesignware_i2c.c;h=c54989504ea24d4ff0d1b97d41afdf68c1306e64;hb=5a1a8a63be8f7262a300eddafb18020926b12fb6;hp=c8c5d2c331026e18308a6ef192e96320e44ba2be;hpb=c95215a6ca1cc7bb53cc634159e222abc06fddff;p=platform%2Fkernel%2Fu-boot.git diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index c8c5d2c..c549895 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -8,10 +8,21 @@ #include #include #include +#include +#include #include #include #include +#include #include "designware_i2c.h" +#include +#include + +/* + * This assigned unique hex value is constant and is derived from the two ASCII + * letters 'DW' followed by a 16-bit unsigned number + */ +#define DW_I2C_COMP_TYPE 0x44570140 #ifdef CONFIG_SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) @@ -149,9 +160,9 @@ static int dw_i2c_calc_timing(struct dw_i2c *priv, enum i2c_speed_mode mode, min_tlow_cnt = calc_counts(ic_clk, info->min_scl_lowtime_ns); min_thigh_cnt = calc_counts(ic_clk, info->min_scl_hightime_ns); - debug("dw_i2c: period %d rise %d fall %d tlow %d thigh %d spk %d\n", - period_cnt, rise_cnt, fall_cnt, min_tlow_cnt, min_thigh_cnt, - spk_cnt); + debug("dw_i2c: mode %d, ic_clk %d, speed %d, period %d rise %d fall %d tlow %d thigh %d spk %d\n", + mode, ic_clk, info->speed, period_cnt, rise_cnt, fall_cnt, + min_tlow_cnt, min_thigh_cnt, spk_cnt); /* * Back-solve for hcnt and lcnt according to the following equations: @@ -163,7 +174,7 @@ static int dw_i2c_calc_timing(struct dw_i2c *priv, enum i2c_speed_mode mode, if (hcnt < 0 || lcnt < 0) { debug("dw_i2c: bad counts. hcnt = %d lcnt = %d\n", hcnt, lcnt); - return -EINVAL; + return log_msg_ret("counts", -EINVAL); } /* @@ -194,11 +205,20 @@ static int dw_i2c_calc_timing(struct dw_i2c *priv, enum i2c_speed_mode mode, return 0; } -static int calc_bus_speed(struct dw_i2c *priv, int speed, ulong bus_clk, - struct dw_i2c_speed_config *config) +/** + * calc_bus_speed() - Calculate the config to use for a particular i2c speed + * + * @priv: Private information for the driver (NULL if not using driver model) + * @i2c_base: Registers for the I2C controller + * @speed: Required i2c speed in Hz + * @bus_clk: Input clock to the I2C controller in Hz (e.g. IC_CLK) + * @config: Returns the config to use for this speed + * @return 0 if OK, -ve on error + */ +static int calc_bus_speed(struct dw_i2c *priv, struct i2c_regs *regs, int speed, + ulong bus_clk, struct dw_i2c_speed_config *config) { const struct dw_scl_sda_cfg *scl_sda_cfg = NULL; - struct i2c_regs *regs = priv->regs; enum i2c_speed_mode i2c_spd; int spk_cnt; int ret; @@ -206,16 +226,25 @@ static int calc_bus_speed(struct dw_i2c *priv, int speed, ulong bus_clk, if (priv) scl_sda_cfg = priv->scl_sda_cfg; /* Allow high speed if there is no config, or the config allows it */ - if (speed >= I2C_SPEED_HIGH_RATE && - (!scl_sda_cfg || scl_sda_cfg->has_high_speed)) + if (speed >= I2C_SPEED_HIGH_RATE) i2c_spd = IC_SPEED_MODE_HIGH; - else if (speed >= I2C_SPEED_FAST_RATE) - i2c_spd = IC_SPEED_MODE_FAST_PLUS; else if (speed >= I2C_SPEED_FAST_PLUS_RATE) + i2c_spd = IC_SPEED_MODE_FAST_PLUS; + else if (speed >= I2C_SPEED_FAST_RATE) i2c_spd = IC_SPEED_MODE_FAST; else i2c_spd = IC_SPEED_MODE_STANDARD; + /* Check is high speed possible and fall back to fast mode if not */ + if (i2c_spd == IC_SPEED_MODE_HIGH) { + u32 comp_param1; + + comp_param1 = readl(®s->comp_param1); + if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK) + != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) + i2c_spd = IC_SPEED_MODE_FAST; + } + /* Get the proper spike-suppression count based on target speed */ if (!priv || !priv->has_spk_cnt) spk_cnt = 0; @@ -228,6 +257,9 @@ static int calc_bus_speed(struct dw_i2c *priv, int speed, ulong bus_clk, if (i2c_spd == IC_SPEED_MODE_STANDARD) { config->scl_hcnt = scl_sda_cfg->ss_hcnt; config->scl_lcnt = scl_sda_cfg->ss_lcnt; + } else if (i2c_spd == IC_SPEED_MODE_HIGH) { + config->scl_hcnt = scl_sda_cfg->hs_hcnt; + config->scl_lcnt = scl_sda_cfg->hs_lcnt; } else { config->scl_hcnt = scl_sda_cfg->fs_hcnt; config->scl_lcnt = scl_sda_cfg->fs_lcnt; @@ -243,11 +275,14 @@ static int calc_bus_speed(struct dw_i2c *priv, int speed, ulong bus_clk, return 0; } -/* - * _dw_i2c_set_bus_speed - Set the i2c speed - * @speed: required i2c speed +/** + * _dw_i2c_set_bus_speed() - Set the i2c speed * - * Set the i2c speed. + * @priv: Private information for the driver (NULL if not using driver model) + * @i2c_base: Registers for the I2C controller + * @speed: Required i2c speed in Hz + * @bus_clk: Input clock to the I2C controller in Hz (e.g. IC_CLK) + * @return 0 if OK, -ve on error */ static int _dw_i2c_set_bus_speed(struct dw_i2c *priv, struct i2c_regs *i2c_base, unsigned int speed, unsigned int bus_clk) @@ -257,7 +292,7 @@ static int _dw_i2c_set_bus_speed(struct dw_i2c *priv, struct i2c_regs *i2c_base, unsigned int ena; int ret; - ret = calc_bus_speed(priv, speed, bus_clk, &config); + ret = calc_bus_speed(priv, i2c_base, speed, bus_clk, &config); if (ret) return ret; @@ -271,7 +306,7 @@ static int _dw_i2c_set_bus_speed(struct dw_i2c *priv, struct i2c_regs *i2c_base, switch (config.speed_mode) { case IC_SPEED_MODE_HIGH: - cntl |= IC_CON_SPD_SS; + cntl |= IC_CON_SPD_HS; writel(config.scl_hcnt, &i2c_base->ic_hs_scl_hcnt); writel(config.scl_lcnt, &i2c_base->ic_hs_scl_lcnt); break; @@ -298,6 +333,32 @@ static int _dw_i2c_set_bus_speed(struct dw_i2c *priv, struct i2c_regs *i2c_base, /* Restore back i2c now speed set */ if (ena == IC_ENABLE_0B) dw_i2c_enable(i2c_base, true); + if (priv) + priv->config = config; + + return 0; +} + +int dw_i2c_gen_speed_config(const struct udevice *dev, int speed_hz, + struct dw_i2c_speed_config *config) +{ + struct dw_i2c *priv = dev_get_priv(dev); + ulong rate; + int ret; + +#if CONFIG_IS_ENABLED(CLK) + rate = clk_get_rate(&priv->clk); + if (IS_ERR_VALUE(rate)) + return log_msg_ret("clk", -EINVAL); +#else + rate = IC_CLK; +#endif + + ret = calc_bus_speed(priv, priv->regs, speed_hz, rate, config); + if (ret) + printf("%s: ret=%d\n", __func__, ret); + if (ret) + return log_msg_ret("calc_bus_speed", ret); return 0; } @@ -678,7 +739,7 @@ static int designware_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) #if CONFIG_IS_ENABLED(CLK) rate = clk_get_rate(&i2c->clk); if (IS_ERR_VALUE(rate)) - return -EINVAL; + return log_ret(-EINVAL); #else rate = IC_CLK; #endif @@ -707,16 +768,18 @@ int designware_i2c_ofdata_to_platdata(struct udevice *bus) int ret; if (!priv->regs) - priv->regs = (struct i2c_regs *)devfdt_get_addr_ptr(bus); + priv->regs = dev_read_addr_ptr(bus); dev_read_u32(bus, "i2c-scl-rising-time-ns", &priv->scl_rise_time_ns); dev_read_u32(bus, "i2c-scl-falling-time-ns", &priv->scl_fall_time_ns); dev_read_u32(bus, "i2c-sda-hold-time-ns", &priv->sda_hold_time_ns); ret = reset_get_bulk(bus, &priv->resets); - if (ret) - dev_warn(bus, "Can't get reset: %d\n", ret); - else + if (ret) { + if (ret != -ENOTSUPP) + dev_warn(bus, "Can't get reset: %d\n", ret); + } else { reset_deassert_bulk(&priv->resets); + } #if CONFIG_IS_ENABLED(CLK) ret = clk_get_by_index(bus, 0, &priv->clk); @@ -737,6 +800,17 @@ int designware_i2c_ofdata_to_platdata(struct udevice *bus) int designware_i2c_probe(struct udevice *bus) { struct dw_i2c *priv = dev_get_priv(bus); + uint comp_type; + + comp_type = readl(&priv->regs->comp_type); + if (comp_type != DW_I2C_COMP_TYPE) { + log_err("I2C bus %s has unknown type %#x\n", bus->name, + comp_type); + return -ENXIO; + } + + log_debug("I2C bus %s version %#x\n", bus->name, + readl(&priv->regs->comp_version)); return __dw_i2c_init(priv->regs, 0, 0); }