X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=drivers%2Fata%2Fsata_inic162x.c;h=2d80c9d95e9572fe6c4d3ba9ade3a9e735e05212;hb=5fd52203e1856ad925b1a6adae9a22e533da94e2;hp=f099a1d83a000b7bb02dacc145259c59334c765e;hpb=18062a91d2ddc40e19fc674afeb7cad58cfa23ab;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git

diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index f099a1d..2d80c9d 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -28,7 +28,7 @@
 #include <scsi/scsi_device.h>
 
 #define DRV_NAME	"sata_inic162x"
-#define DRV_VERSION	"0.1"
+#define DRV_VERSION	"0.2"
 
 enum {
 	MMIO_BAR		= 5,
@@ -135,10 +135,6 @@ static struct scsi_host_template inic_sht = {
 	.slave_configure	= inic_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static const int scr_map[] = {
@@ -420,7 +416,8 @@ static void inic_thaw(struct ata_port *ap)
  * SRST and SControl hardreset don't give valid signature on this
  * controller.  Only controller specific hardreset mechanism works.
  */
-static int inic_hardreset(struct ata_port *ap, unsigned int *class)
+static int inic_hardreset(struct ata_port *ap, unsigned int *class,
+			  unsigned long deadline)
 {
 	void __iomem *port_base = inic_port_base(ap);
 	void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
@@ -437,7 +434,7 @@ static int inic_hardreset(struct ata_port *ap, unsigned int *class)
 	msleep(1);
 	writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
 
-	rc = sata_phy_resume(ap, timing);
+	rc = sata_phy_resume(ap, timing, deadline);
 	if (rc) {
 		ata_port_printk(ap, KERN_WARNING, "failed to resume "
 				"link after reset (errno=%d)\n", rc);
@@ -451,10 +448,12 @@ static int inic_hardreset(struct ata_port *ap, unsigned int *class)
 		/* wait a while before checking status */
 		msleep(150);
 
-		if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
-			ata_port_printk(ap, KERN_WARNING,
-					"device busy after hardreset\n");
-			return -EIO;
+		rc = ata_wait_ready(ap, deadline);
+		/* link occupied, -ENODEV too is an error */
+		if (rc) {
+			ata_port_printk(ap, KERN_WARNING, "device not ready "
+					"after hardreset (errno=%d)\n", rc);
+			return rc;
 		}
 
 		ata_tf_read(ap, &tf);