X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=docs%2Fcontent%2Fprogramming-guide%2Ftype-registration.h;h=ad7b5a4d32549e42a6ed26e2dce6ba31485e0fed;hb=fa6477bd50a7cf490c97ca272738a50175909f66;hp=bef67d0ca5aa15863f525828708f6a7f52f10777;hpb=c32e712ddb572650fe0766d7f10a9707db5b5c6b;p=platform%2Fcore%2Fuifw%2Fdali-toolkit.git
diff --git a/docs/content/programming-guide/type-registration.h b/docs/content/programming-guide/type-registration.h
index bef67d0..ad7b5a4 100644
--- a/docs/content/programming-guide/type-registration.h
+++ b/docs/content/programming-guide/type-registration.h
@@ -6,23 +6,22 @@ DALi has a \link Dali::TypeRegistry type registration \endlink system which can
a derived actor/control type along with specifying a method which is used to create this type. This
type registration normally takes place at library load time.
-Once a type is registered, signals, actions and properties can also be registered for all instances
+Once a type is registered, properties, signals and actions can also be registered for all instances
of this type.
-This then allows the application writer to create instances using just the type name; connect to
-signals using only the signal name; activate an action by just using the action name; and finally,
-getting and setting properties using a property name or index.
+This then allows the application writer to create instances using just the type name; getting and setting properties using a property name or index; connect to
+signals using only the signal name; and activate an action by just using the action name.
This topic covers:
- @ref register-type
+ - @ref register-property
- @ref register-signal
- @ref register-action
- - @ref register-property
- @ref using-type
+ - @ref using-property
- @ref using-signal
- @ref using-action
- - @ref using-property
@section register-type Registering a Type
@@ -37,22 +36,252 @@ within the source file of the deriving control as shown in the code below.
namespace
{
-Dali::BaseHandle Create()
+Dali::BaseHandle CreateMyControl()
{
// Create an instance of MyControl and return the handle.
return MyControlImpl::New();
}
-Dali::TypeRegistration type(
- typeid( MyControl ), // Type ID of our Control
- typeid( Dali::Toolkit::Control ), // Type ID of what our Control derives from
- Create // Function which creates our Control, signature shown above
-);
+DALI_TYPE_REGISTRATION_BEGIN( MyControl, Toolkit::Control, CreateMyControl );
+DALI_TYPE_REGISTRATION_END()
} // unnamed namespace
@endcode
-This registration informs DALi of the existence of MyControl type.
+This registration macro informs DALi of the existence of MyControl type, which class it derives from, and a method for creating an instance of MyControl.
+
+
+@section register-property Registering a Property
+
+DALi has a property system which can be extended by registering more properties through the type
+registry. The property index is very important when registering these properties and
+all property indices should be between Dali::PROPERTY_REGISTRATION_START_INDEX and
+Dali::PROPERTY_REGISTRATION_MAX_INDEX.
+
+Furthermore, if deriving from a \link Dali::Toolkit::Control Control\endlink, the control
+writer needs to be aware of their parent class's property range to avoid overlapping indices, so should start their property indices after their parent's range.
+Control reserves a property range between
+\link Dali::Toolkit::Control::CONTROL_PROPERTY_START_INDEX Control::CONTROL_PROPERTY_START_INDEX\endlink
+and \link Dali::Toolkit::Control::CONTROL_PROPERTY_END_INDEX Control::CONTROL_PROPERTY_END_INDEX\endlink.
+
+Any control deriving from \link Dali::Toolkit::Control Control\endlink
+should start at
+\link Dali::Toolkit::Control::CONTROL_PROPERTY_END_INDEX Control::CONTROL_PROPERTY_END_INDEX\endlink + 1.
+Controls deriving from an existing control such as \link Dali::Toolkit::Button Button\endlink should start at
+\link Dali::Toolkit::Button::PROPERTY_END_INDEX Button::PROPERTY_END_INDEX\endlink + 1.
+
+Please have a look at \ref property-indices for more information.
+
+The following code shows how a property can be added to a type.
+
+@code
+// Define the indices we will use for the properties:
+
+class MyControl : public Control
+{
+ /**
+ * @brief The start and end property ranges for this control.
+ */
+ enum PropertyRange
+ {
+ PROPERTY_START_INDEX = Control::CONTROL_PROPERTY_END_INDEX + 1,
+ PROPERTY_END_INDEX = PROPERTY_START_INDEX + 1000,
+
+ ANIMATABLE_PROPERTY_START_INDEX = ANIMATABLE_PROPERTY_REGISTRATION_START_INDEX,
+ ANIMATABLE_PROPERTY_END_INDEX = ANIMATABLE_PROPERTY_REGISTRATION_START_INDEX + 1000
+ };
+
+ struct Property
+ {
+ enum
+ {
+ // Event side properties
+
+ /**
+ * @brief name "propertyOne", type bool
+ * @details Enables the feature.
+ * @SINCE_1_0.0
+ */
+ PROPERTY_ONE = PROPERTY_START_INDEX,
+
+ /**
+ * @brief name "propertyTwo", type float
+ * @details Controls the level of the feature
+ * @SINCE_1_0.0
+ */
+ PROPERTY_TWO,
+
+ /**
+ * @brief name "propertyThree", type Vector4
+ * @details The foreground color
+ * @SINCE_1_0.0
+ */
+ PROPERTY_THREE,
+
+ // Animatable properties
+
+ /**
+ * @brief name "propertyFour", type Vector4
+ * @details Animatable parameters of the feature
+ * @SINCE_1_0.0
+ */
+ PROPERTY_FOUR = ANIMATABLE_PROPERTY_START_INDEX,
+ };
+ };
+
+ /// ...
+};
+@endcode
+
+The control and properties are registered with the TypeRegistry using the following macros:
+
+@code
+DALI_TYPE_REGISTRATION_BEGIN( MyControl, Toolkit::Control, CreateMyControl );
+DALI_PROPERTY_REGISTRATION( AppNamespace, MyControl, "property1", BOOLEAN, PROPERTY_ONE )
+DALI_PROPERTY_REGISTRATION( AppNamespace, MyControl, "property2", FLOAT, PROPERTY_TWO )
+DALI_PROPERTY_REGISTRATION( AppNamespace, MyControl, "property3", VECTOR4, PROPERTY_THREE )
+
+DALI_ANIMATABLE_PROPERTY_REGISTRATION_WITH_DEFAULT( AppNamespace, MyControl, "property4", Vector4(0.f, 0.f, 1.f, 1.f), PROPERTY_FOUR )
+
+DALI_TYPE_REGISTRATION_END()
+@endcode
+
+The DALI_PROPERTY_REGISTRATION macro requires that you define the class methods SetProperty() and GetProperty().
+
+The DALI_ANIMATABLE_PROPERTY_REGISTRATION macros automatically create and handle scene-graph values, and do not need any code in your derived class. Just use the property index in animation or constraint methods.
+
+The SetProperty class method has to be static, and follows the format:
+
+@code
+void MyControl::SetProperty(
+ Dali::BaseObject* object, // A pointer to an instance of MyControl
+ Dali::Property::Index index, // The index of the property to set
+ const Dali::Property::Value& value // The value to set the property to
+)
+{
+ // DownCast to MyControl so that we can do the specific behaviour
+ MyControl control = MyControl::DownCast( Dali::BaseHandle ( object ) );
+
+ if ( control )
+ {
+ MyControlImpl& controlImpl( GetImplementation( control ) );
+
+ switch ( index )
+ {
+ case PROPERTY_ONE:
+ {
+ // Assume we already have a method in MyControl which sets the appropriate value and takes in a boolean
+ bool property;
+ if( value.Get( property ) )
+ {
+ controlImpl.SetPropertyOne( property );
+ }
+ break;
+ }
+
+ case PROPERTY_TWO
+ {
+ // Assume we already have a method in MyControl which sets the appropriate value and takes in a float
+ float property;
+ if( value.Get( property ) )
+ {
+ controlImpl.SetPropertyTwo( property );
+ }
+ break;
+ }
+
+ case PROPERTY_THREE
+ {
+ // Assume we already have a method in MyControl which sets the appropriate value and takes in a Vector4
+ Vector4 property;
+ if( value.Get( property ) )
+ {
+ controlImpl.SetPropertyThree( property );
+ }
+ break;
+ }
+ }
+ }
+}
+@endcode
+
+And the GetProperty method also has to be static and takes the form:
+
+@code
+Property::Value MyControl::GetProperty(
+ BaseObject* object, // A pointer to an instance of MyControl
+ Property::Index index ) // The index of the property to retrieve
+{
+ Property::Value value;
+
+ // DownCast to MyControl so that we can do the specific behaviour
+ MyControl control = MyControl::DownCast( Dali::BaseHandle ( object ) );
+
+ if ( control )
+ {
+ MyControlImpl& controlImpl( GetImplementation( control ) );
+
+ switch ( index )
+ {
+ case PROPERTY_ONE:
+ {
+ // Assume we have a member variable that stores the value of this property
+ value = controlImpl.mPropertyOne;
+ break;
+ }
+
+ case PROPERTY_TWO:
+ {
+ // Assume we have a member variable that stores the value of this property
+ value = controlImpl.mPropertyTwo;
+ break;
+ }
+
+ case PROPERTY_THREE:
+ {
+ // Assume we have a member variable that stores the value of this property
+ value = controlImpl.mPropertyThree;
+ break;
+ }
+ }
+ }
+}
+@endcode
+
+@section using-property Setting & Getting Registered Properties
+
+Like other properties, type registered properties can also be set and their values can be retrieved
+in a similar manner. The code below shows how this can be done.
+
+@code
+Dali::TypeInfo type = Dali::TypeRegistry::Get().GetTypeInfo( "MyControl" );
+
+if ( type )
+{
+ Dali::BaseHandle baseHandle = type.CreateInstance();
+
+ if ( baseHandle )
+ {
+ // Handle deals with properties, so DownCast
+ Dali::Handle handle = Dali::Handle::DownCast( baseHandle );
+
+ if ( handle )
+ {
+ // Setting a property
+ handle.SetProperty( MyControl::Property::PROPERTY_ONE, 11.0f );
+
+ // Get the property name
+ std::cout << "Property1 name is: " << handle.GetPropertyName( MyControl::Property::PROPERTY_ONE ) << std::endl;
+
+ // Get the property
+ bool propertyOne = handle.GetProperty< bool >( MyControl::Property::PROPERTY_ONE );
+
+ // Set the second property
+ handle.SetProperty( MyControl::Property::PROPERTY_TWO, 4.0f );
+ }
+ }
+}
+@endcode
@section register-signal Registering a Signal
@@ -184,133 +413,10 @@ bool MyControl::DoAction(
}
@endcode
-@section register-property Registering a Property
-
-DALi has a property system which can be extended by registering more properties through the type
-registry. The property index is very important when registering these properties and
-all property indices should be between Dali::PROPERTY_REGISTRATION_START_INDEX and
-Dali::PROPERTY_REGISTRATION_MAX_INDEX.
-
-Furthermore, if deriving from \link Dali::Toolkit::Control Control\endlink, the control writer
-needs to be aware of their parent class's property range. Control reserves a property range between
-\link Dali::Toolkit::Control::CONTROL_PROPERTY_START_INDEX ControlImpl::CONTROL_PROPERTY_START_INDEX\endlink
-and \link Dali::Toolkit::Control::CONTROL_PROPERTY_END_INDEX Control::CONTROL_PROPERTY_END_INDEX\endlink.
-Any deriving control should start their property indices from
-\link Dali::Toolkit::Control::CONTROL_PROPERTY_END_INDEX Control::CONTROL_PROPERTY_END_INDEX\endlink + 1.
-
-Please have a look at \ref property-indices for more information.
-
-The following code shows how a property can be added to a type.
-
-@code
-// Define the indices we will use for the properties
-static const int PROPERTY_ONE( Dali::Toolkit::Internal::Control::CONTROL_PROPERTY_END_INDEX + 1 );
-static const int PROPERTY_TWO( Dali::Toolkit::Internal::Control::CONTROL_PROPERTY_END_INDEX + 2 );
-static const int PROPERTY_THREE( Dali::Toolkit::Internal::Control::CONTROL_PROPERTY_END_INDEX + 3 );
-
-Dali::PropertyRegistration property1(
- type, // Reference to type registration object (see above)
- "property1", // Name of the property
- PROPERTY_ONE, // Index of this property
- Dali::Property::BOOLEAN, // The property type
- &MyControl::SetProperty, // Method called when property is set
- &MyControl::GetProperty // Method called when retrieving the value of the property
-);
-
-// Register more properties
-Dali::PropertyRegistration property2(
- type, "property2", PROPERTY_TWO, Dali::Property::FLOAT,
- NULL, // SetProperty is NULL, means that this property is a read-only property
- &MyControl::GetProperty
-);
-Dali::PropertyRegistration property3( type, "property3", PROPERTY_THREE, Dali::Property::FLOAT, &MyControl::SetProperty, &MyControl::GetProperty);
-@endcode
-
-It is recommended to use static members (of MyControl class) for the property indices. That way
-applications can also use the static member as well. If they require the property name, they can
-just call the Dali::Handle::GetPropertyName().
-
-The method that deals with setting the property has to be static, and follows the format:
-
-@code
-void MyControl::SetProperty(
- Dali::BaseObject* object, // A pointer to an instance of MyControl
- Dali::Property::Index index, // The index of the property to set
- const Dali::Property::Value& value // The value to set the property to
-)
-{
- // DownCast to MyControl so that we can do the specific behaviour
- MyControl control = MyControl::DownCast( Dali::BaseHandle ( object ) );
-
- if ( control )
- {
- MyControlImpl& controlImpl( GetImplementation( control ) );
-
- switch ( index )
- {
- case PROPERTY_ONE:
- {
- // Assume we already have a method in MyControl which sets the appropriate value and takes in a boolean
- controlImpl.SetPropertyOne( value.Get< bool >() );
- break;
- }
+If the action is not performed by the derived class, it will be propagated to the base class.
+For example, in the above case, MyControl can perform "action1" so should return true, but it
+cannot perform "action4" so should return false and propagate the action to Control.
- // PROPERTY_TWO is read-only so does not need to be handled
-
- case PROPERTY_THREE
- {
- // Assume we already have a method in MyControl which sets the appropriate value and takes in a float
- controlImpl.SetPropertyThree( value.Get< float >() );
- break;
- }
- }
- }
-}
-@endcode
-
-And the function to retrieve the property value also has to be static and takes the form:
-
-@code
-Property::Value MyControl::GetProperty(
- BaseObject* object, // A pointer to an instance of MyControl
- Property::Index index // The index of the property to retrieve
-)
-{
- Property::Value value;
-
- // DownCast to MyControl so that we can do the specific behaviour
- MyControl control = MyControl::DownCast( Dali::BaseHandle ( object ) );
-
- if ( control )
- {
- MyControlImpl& controlImpl( GetImplementation( control ) );
-
- switch ( index )
- {
- case PROPERTY_ONE:
- {
- // Assume we have a member variable that stores the value of this property
- value = controlImpl.mPropertyOne;
- break;
- }
-
- case PROPERTY_TWO:
- {
- // Assume we have a member variable that stores the value of this property
- value = controlImpl.mPropertyTwo;
- break;
- }
-
- case PROPERTY_THREE:
- {
- // Assume we have a member variable that stores the value of this property
- value = controlImpl.mPropertyThree;
- break;
- }
- }
- }
-}
-@endcode
@section using-type Creating an instance of a Registered Type
@@ -403,39 +509,5 @@ if ( type )
}
@endcode
-@section using-property Setting & Getting Registered Properties
-
-Like other properties, type registered properties can also be set and their values can be retrieved
-in a similar manner. The code below shows how this can be done.
-
-@code
-Dali::TypeInfo type = Dali::TypeRegistry::Get().GetTypeInfo( "MyControl" );
-
-if ( type )
-{
- Dali::BaseHandle baseHandle = type.CreateInstance();
-
- if ( baseHandle )
- {
- // Handle deals with properties, so DownCast
- Dali::Handle handle = Dali::Handle::DownCast( baseHandle );
-
- if ( handle )
- {
- // Setting a property
- handle.SetProperty( PROPERTY_ONE, true ); // Assume Property indices are publicly accessible
-
- // Get the property name
- std::cout << "Property1 name is: " << handle.GetPropertyName( PROPERTY_ONE ) << std::endl;
-
- // Get the property
- bool propertyOne = handle.GetProperty< bool >( PROPERTY_ONE );
-
- // Attempt to write a read-only property...
- handle.SetProperty( PROPERTY_TWO, 4.0f ); // !!! Will assert as PROPERTY_TWO is read-only !!!
- }
- }
-}
-@endcode
*
*/