X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=cpu%2Fppc4xx%2F4xx_pci.c;h=eed4534e5f50b146edd57ff27efddfa2c304ee11;hb=35e3717772c8c3534c18d8aac69e4b822777c23b;hp=941d4dc7881bcc69cd8ddd5125f17c8ce631e9c3;hpb=e95bcc3661a78ccc094c365ecd2484d00a60f97d;p=platform%2Fkernel%2Fu-boot.git diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index 941d4dc..eed4534 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -1,4 +1,6 @@ /*-----------------------------------------------------------------------------+ + * This source code is dual-licensed. You may use it under the terms of + * the GNU General Public license version 2, or under the license below. * * This source code has been made available to you by IBM on an AS-IS * basis. Anyone receiving this source is licensed under IBM @@ -46,7 +48,7 @@ * 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB * 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not * really required after a reset since PMMxMAs are already - * disabled but is a good practice nonetheless. JWB + * disabled but is a good practice nonetheless. JWB * 12-Jun-01 stefan.roese@esd-electronics.com * - PCI host/adapter handling reworked * 09-Jul-01 stefan.roese@esd-electronics.com @@ -71,33 +73,60 @@ #include #include -#if !defined(CONFIG_440) #include -#endif #include +#include #include #ifdef CONFIG_PCI DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) + +#if defined(CONFIG_PMC405) +ushort pmc405_pci_subsys_deviceid(void); +#endif + +/*#define DEBUG*/ + /* * Board-specific pci initialization * Platform code can reimplement pci_pre_init() if needed */ int __pci_pre_init(struct pci_controller *hose) { +#if defined(CONFIG_405EP) + /* + * Enable the internal PCI arbiter by default. + * + * On 405EP CPUs the internal arbiter can be controlled + * by the I2C strapping EEPROM. If you want to do so + * or if you want to disable the arbiter pci_pre_init() + * must be reimplemented without enabling the arbiter. + * The arbiter is enabled in this place because of + * compatibility reasons. + */ + mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN); +#endif /* CONFIG_405EP */ + return 1; } -int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init"))); - -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) +int pci_pre_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_pre_init"))); -#if defined(CONFIG_PMC405) -ushort pmc405_pci_subsys_deviceid(void); +int __is_pci_host(struct pci_controller *hose) +{ +#if defined(CONFIG_405GP) + if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN) + return 1; +#elif defined (CONFIG_405EP) + if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN) + return 1; #endif - -/*#define DEBUG*/ + return 0; +} +int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host"))); /*-----------------------------------------------------------------------------+ * pci_init. Initializes the 405GP PCI Configuration regs. @@ -108,12 +137,12 @@ void pci_405gp_init(struct pci_controller *hose) bd_t *bd = gd->bd; unsigned short temp_short; - unsigned long ptmpcila[2] = {CFG_PCI_PTM1PCI, CFG_PCI_PTM2PCI}; -#if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405) + unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI}; +#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE) char *ptmla_str, *ptmms_str; #endif - unsigned long ptmla[2] = {CFG_PCI_PTM1LA, CFG_PCI_PTM2LA}; - unsigned long ptmms[2] = {CFG_PCI_PTM1MS, CFG_PCI_PTM2MS}; + unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA}; + unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS}; #if defined(CONFIG_PIP405) || defined (CONFIG_MIP405) unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0}; unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0}; @@ -131,7 +160,7 @@ void pci_405gp_init(struct pci_controller *hose) #endif #endif -#if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405) +#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE) ptmla_str = getenv("ptm1la"); ptmms_str = getenv("ptm1ms"); if(NULL != ptmla_str && NULL != ptmms_str ) { @@ -179,7 +208,7 @@ void pci_405gp_init(struct pci_controller *hose) ptmpcila[i], ptmla[i], ~(ptmms[i] & 0xfffff000) + 1, PCI_REGION_MEM | - PCI_REGION_MEMORY); + PCI_REGION_SYS_MEMORY); } /* PCI memory spaces */ @@ -202,7 +231,7 @@ void pci_405gp_init(struct pci_controller *hose) pciauto_region_init(hose->pci_fb); /* Let board change/modify hose & do initial checks */ - if (pci_pre_init (hose) == 0) { + if (pci_pre_init(hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); return; @@ -268,25 +297,25 @@ void pci_405gp_init(struct pci_controller *hose) /* * Insert Subsystem Vendor and Device ID */ - pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID); + pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID); #ifdef CONFIG_CPCI405 - if (mfdcr(strap) & PSR_PCI_ARBIT_EN) - pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID); + if (is_pci_host(hose)) + pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); else - pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID2); + pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2); #else - pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID); + pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); #endif /* * Insert Class-code */ -#ifdef CFG_PCI_CLASSCODE - pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CFG_PCI_CLASSCODE); -#endif /* CFG_PCI_CLASSCODE */ +#ifdef CONFIG_SYS_PCI_CLASSCODE + pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE); +#endif /* CONFIG_SYS_PCI_CLASSCODE */ /*--------------------------------------------------------------------------+ - * If PCI speed = 66Mhz, set 66Mhz capable bit. + * If PCI speed = 66MHz, set 66MHz capable bit. *--------------------------------------------------------------------------*/ if (bd->bi_pci_busfreq >= 66000000) { pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short); @@ -295,7 +324,7 @@ void pci_405gp_init(struct pci_controller *hose) #if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER) #if (CONFIG_PCI_HOST == PCI_HOST_AUTO) - if ((mfdcr(strap) & PSR_PCI_ARBIT_EN) || + if (is_pci_host(hose) || (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0))) #endif { @@ -310,8 +339,15 @@ void pci_405gp_init(struct pci_controller *hose) } #endif -#if defined(CONFIG_405EP) /* on ppc405ep vendor id is not set */ - pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, 0x1014); /* IBM */ +#if defined(CONFIG_405EP) + /* + * on ppc405ep vendor/device id is not set + * The user manual says 0x1014 (IBM) / 0x0156 (405GP!) + * are the correct values. + */ + pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM); + pci_write_config_word(PCIDEVID_405GP, + PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP); #endif /* @@ -325,7 +361,7 @@ void pci_405gp_init(struct pci_controller *hose) * Scan the PCI bus and configure devices found. *--------------------------------------------------------------------------*/ #if (CONFIG_PCI_HOST == PCI_HOST_AUTO) - if ((mfdcr(strap) & PSR_PCI_ARBIT_EN) || + if (is_pci_host(hose) || (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0))) #endif { @@ -405,8 +441,8 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev, */ static struct pci_config_table pci_405gp_config_table[] = { /*if VendID is 0 it terminates the table search (ie Walnut)*/ -#ifdef CFG_PCI_SUBSYS_VENDORID - {CFG_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST, +#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID + {CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge}, #endif {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, @@ -442,6 +478,231 @@ void pci_init_board(void) static struct pci_controller ppc440_hose = {0}; +/* + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * Weak default implementation: "Normal" boards implement the PCI + * host functionality. This can be overridden for PCI adapter boards. + */ +int __is_pci_host(struct pci_controller *hose) +{ + return 1; +} +int is_pci_host(struct pci_controller *hose) + __attribute__((weak, alias("__is_pci_host"))); + +#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ + defined(CONFIG_440GR) || defined(CONFIG_440GRX) + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) +/* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ +void __pci_target_init(struct pci_controller *hose) +{ + /* + * Set up Direct MMIO registers + */ + + /* + * PowerPC440 EP PCI Master configuration. + * Map one 1Gig range of PLB/processor addresses to PCI memory space. + * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF + * Use byte reversed out routines to handle endianess. + * Make this region non-prefetchable. + */ + /* PMM0 Mask/Attribute - disabled b4 setting */ + out_le32((void *)PCIL0_PMM0MA, 0x00000000); + /* PMM0 Local Address */ + out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); + /* PMM0 PCI Low Address */ + out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); + /* PMM0 PCI High Address */ + out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000); + /* 512M + No prefetching, and enable region */ + out_le32((void *)PCIL0_PMM0MA, 0xE0000001); + + /* PMM1 Mask/Attribute - disabled b4 setting */ + out_le32((void *)PCIL0_PMM1MA, 0x00000000); + /* PMM1 Local Address */ + out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); + /* PMM1 PCI Low Address */ + out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); + /* PMM1 PCI High Address */ + out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000); + /* 512M + No prefetching, and enable region */ + out_le32((void *)PCIL0_PMM1MA, 0xE0000001); + + out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out_le32((void *)PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out_le32((void *)PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out_le32((void *)PCIL0_PTM2LA, 0); /* Local Addr. Reg */ + + /* + * Set up Configuration registers + */ + + /* Program the board's subsystem id/vendor id */ + pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, + CONFIG_SYS_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); + + /* Configure command register as bus master */ + pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); + + /* 240nS PCI clock */ + pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + + /* No error reporting */ + pci_write_config_word(0, PCI_ERREN, 0); + + pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); +} +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ + +/* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + */ +int __pci_pre_init(struct pci_controller *hose) +{ + u32 reg; + + /* + * Set priority for all PLB3 devices to 0. + * Set PLB3 arbiter to fair mode. + */ + mfsdr(SD0_AMP1, reg); + mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00); + reg = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, reg | 0x80000000); + + /* + * Set priority for all PLB4 devices to 0. + */ + mfsdr(SD0_AMP0, reg); + mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00); + reg = mfdcr(PLB4_ACR) | 0xa0000000; + mtdcr(PLB4_ACR, reg); + + /* + * Set Nebula PLB4 arbiter to fair mode. + */ + /* Segment0 */ + reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, reg); + + /* Segment1 */ + reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, reg); + +#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ) + hose->fixup_irq = board_pci_fixup_irq; +#endif + + return 1; +} + +#else /* defined(CONFIG_440EP) ... */ + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) +void __pci_target_init(struct pci_controller * hose) +{ + /* + * Disable everything + */ + out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ + out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ + + /* + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 + * strapping options do not support sizes such as 128/256 MB. + */ + out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out_le32((void *)PCIL0_PIM0LAH, 0); + out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); + out_le32((void *)PCIL0_BAR0, 0); + + /* + * Program the board's subsystem id/vendor id + */ + out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + + out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) | + PCI_COMMAND_MEMORY); +} +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ + +int __pci_pre_init(struct pci_controller *hose) +{ + /* + * This board is always configured as the host & requires the + * PCI arbiter to be enabled. + */ + if (!pci_arbiter_enabled()) { + printf("PCI: PCI Arbiter disabled!\n"); + return 0; + } + + return 1; +} + +#endif /* defined(CONFIG_440EP) ... */ + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose) + __attribute__((weak, alias("__pci_target_init"))); +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ + +int pci_pre_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_pre_init"))); + +#if defined(CONFIG_SYS_PCI_MASTER_INIT) +void __pci_master_init(struct pci_controller *hose) +{ + u16 reg; + + /* + * Write the PowerPC440 EP PCI Configuration regs. + * Enable PowerPC440 EP to be a master on the PCI bus (PMM). + * Enable PowerPC440 EP to act as a PCI memory target (PTM). + */ + pci_read_config_word(0, PCI_COMMAND, ®); + pci_write_config_word(0, PCI_COMMAND, reg | + PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); +} +void pci_master_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_master_init"))); +#endif /* CONFIG_SYS_PCI_MASTER_INIT */ int pci_440_init (struct pci_controller *hose) { @@ -455,7 +716,7 @@ int pci_440_init (struct pci_controller *hose) #if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) unsigned long strap; - mfsdr(sdr_sdstp1,strap); + mfsdr(SDR0_SDSTP1,strap); if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) { printf("PCI: SDR0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); @@ -464,7 +725,7 @@ int pci_440_init (struct pci_controller *hose) #elif defined(CONFIG_440GP) unsigned long strap; - strap = mfdcr(cpc0_strp1); + strap = mfdcr(CPC0_STRP1); if ((strap & CPC0_STRP1_PISE_MASK) == 0) { printf("PCI: CPC0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); @@ -482,16 +743,16 @@ int pci_440_init (struct pci_controller *hose) /* PCI I/O space */ pci_set_region(hose->regions + reg_num++, 0x00000000, - PCIX0_IOBASE, + PCIL0_IOBASE, 0x10000, PCI_REGION_IO); /* PCI memory space */ pci_set_region(hose->regions + reg_num++, - CFG_PCI_TARGBASE, - CFG_PCI_MEMBASE, -#ifdef CFG_PCI_MEMSIZE - CFG_PCI_MEMSIZE, + CONFIG_SYS_PCI_TARGBASE, + CONFIG_SYS_PCI_MEMBASE, +#ifdef CONFIG_SYS_PCI_MEMSIZE + CONFIG_SYS_PCI_MEMSIZE, #else 0x10000000, #endif @@ -504,15 +765,15 @@ int pci_440_init (struct pci_controller *hose) CONFIG_PCI_SYS_MEM_BUS, CONFIG_PCI_SYS_MEM_PHYS, CONFIG_PCI_SYS_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY ); + PCI_REGION_MEM | PCI_REGION_SYS_MEMORY ); #endif hose->region_count = reg_num; - pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA); + pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA); /* Let board change/modify hose & do initial checks */ - if (pci_pre_init (hose) == 0) { + if (pci_pre_init(hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); return -1; @@ -523,45 +784,47 @@ int pci_440_init (struct pci_controller *hose) /*--------------------------------------------------------------------------+ * PCI target init *--------------------------------------------------------------------------*/ -#if defined(CFG_PCI_TARGET_INIT) +#if defined(CONFIG_SYS_PCI_TARGET_INIT) pci_target_init(hose); /* Let board setup pci target */ #else - out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID ); - out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */ + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID ); + out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */ #endif #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) - out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */ - out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */ -#elif defined(PCIX0_BRDGOPT1) - out32r( PCIX0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */ - out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config */ + out32r( PCIL0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */ + out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */ +#elif defined(PCIL0_BRDGOPT1) + out32r( PCIL0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */ + out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config */ #endif /*--------------------------------------------------------------------------+ * PCI master init: default is one 256MB region for PCI memory: - * 0x3_00000000 - 0x3_0FFFFFFF ==> CFG_PCI_MEMBASE + * 0x3_00000000 - 0x3_0FFFFFFF ==> CONFIG_SYS_PCI_MEMBASE *--------------------------------------------------------------------------*/ -#if defined(CFG_PCI_MASTER_INIT) +#if defined(CONFIG_SYS_PCI_MASTER_INIT) pci_master_init(hose); /* Let board setup pci master */ #else - out32r( PCIX0_POM0SA, 0 ); /* disable */ - out32r( PCIX0_POM1SA, 0 ); /* disable */ - out32r( PCIX0_POM2SA, 0 ); /* disable */ -#if defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) - out32r( PCIX0_POM0LAL, 0x10000000 ); - out32r( PCIX0_POM0LAH, 0x0000000c ); + out32r( PCIL0_POM0SA, 0 ); /* disable */ + out32r( PCIL0_POM1SA, 0 ); /* disable */ + out32r( PCIL0_POM2SA, 0 ); /* disable */ +#if defined(CONFIG_440SPE) + out32r( PCIL0_POM0LAL, 0x10000000 ); + out32r( PCIL0_POM0LAH, 0x0000000c ); +#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + out32r( PCIL0_POM0LAL, 0x20000000 ); + out32r( PCIL0_POM0LAH, 0x0000000c ); #else - out32r( PCIX0_POM0LAL, 0x00000000 ); - out32r( PCIX0_POM0LAH, 0x00000003 ); + out32r( PCIL0_POM0LAL, 0x00000000 ); + out32r( PCIL0_POM0LAH, 0x00000003 ); #endif - out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE ); - out32r( PCIX0_POM0PCIAH, 0x00000000 ); - out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */ - out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 ); + out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE ); + out32r( PCIL0_POM0PCIAH, 0x00000000 ); + out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */ + out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 ); #endif /*--------------------------------------------------------------------------+ @@ -576,7 +839,7 @@ int pci_440_init (struct pci_controller *hose) #endif #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) - out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER); + out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER); #endif hose->last_busno = pci_hose_scan(hose); } @@ -588,8 +851,9 @@ void pci_init_board(void) int busno; busno = pci_440_init (&ppc440_hose); -#if defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) +#if (defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \ + !defined(CONFIG_PCI_DISABLE_PCIE) pcie_setup_hoses(busno + 1); #endif }