X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=cpu%2Fmpc5xx%2Fstart.S;h=f2ffe84c2d96233d07201cb809a75682d30f47df;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=0637003ce29916b0fdd8ffd2b83a5a1e2335e41b;hpb=71edc271816ec82cf0550dd6980be2da3cc2ad9e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S
index 0637003..f2ffe84 100644
--- a/cpu/mpc5xx/start.S
+++ b/cpu/mpc5xx/start.S
@@ -87,7 +87,7 @@ version_string:
 	.globl	_start
 _start:
 	mfspr	r3, 638
-	li	r4, CFG_ISB			/* Set ISB bit */
+	li	r4, CONFIG_SYS_ISB			/* Set ISB bit */
 	or	r3, r3, r4
 	mtspr	638, r3
 	li	r21, BOOTFLAG_COLD		/* Normal Power-On: Boot from FLASH	*/
@@ -121,12 +121,12 @@ boot_warm:
 	/* the external flash access on PATI fails if programming the PLL to 40MHz.
 	 * Copy the PLL programming code to the internal RAM and execute it
 	 *----------------------------------------------------------------------*/
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
 	addi	r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
 
-	lis	r4, CFG_INIT_RAM_ADDR@h
-	ori	r4, r4, CFG_INIT_RAM_ADDR@l
+	lis	r4, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
 	mtlr	r4
 	addis	r5,0,0x0
 	ori	r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
@@ -144,8 +144,8 @@ boot_warm:
 	 * Calculate absolute address in FLASH and jump there
 	 *----------------------------------------------------------------------*/
 
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
 	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
 	mtlr	r3
 	blr
@@ -155,9 +155,9 @@ in_flash:
 	/* Initialize some SPRs that are hard to access from C			*/
 	/*----------------------------------------------------------------------*/
 
-	lis     r3, CFG_IMMR@h			/* Pass IMMR as arg1 to C routine */
-	lis	r2, CFG_INIT_SP_ADDR@h
-	ori	r1, r2, CFG_INIT_SP_ADDR@l	/* Set up the stack in internal SRAM */
+	lis     r3, CONFIG_SYS_IMMR@h			/* Pass IMMR as arg1 to C routine */
+	lis	r2, CONFIG_SYS_INIT_SP_ADDR@h
+	ori	r1, r2, CONFIG_SYS_INIT_SP_ADDR@l	/* Set up the stack in internal SRAM */
 	/* Note: R0 is still 0 here */
 	stwu	r0, -4(r1)			/* Clear final stack frame so that	*/
 	stwu	r0, -4(r1)			/* stack backtraces terminate cleanly	*/
@@ -173,8 +173,8 @@ in_flash:
 
 	/* Set up debug mode entry */
 
-	lis	r2, CFG_DER@h
-	ori	r2, r2, CFG_DER@l
+	lis	r2, CONFIG_SYS_DER@h
+	ori	r2, r2, CONFIG_SYS_DER@l
 	mtspr	DER, r2
 
 	/* Let the C-code set up the rest					*/
@@ -385,15 +385,15 @@ relocate_code:
 	mr	r10, r5		/* Save copy of monitor destination Address in SRAM */
 
 	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
@@ -581,15 +581,15 @@ trap_reloc:
 #if defined(CONFIG_PATI)
 /* Program the PLL */
 pll_prog_code_start:
-	lis	r4, (CFG_IMMR + 0x002fc384)@h
-	ori	r4, r4, (CFG_IMMR + 0x002fc384)@l
+	lis	r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
+	ori	r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
 	lis	r3, (0x55ccaa33)@h
 	ori	r3, r3, (0x55ccaa33)@l
 	stw	r3, 0(r4)
-	lis	r4, (CFG_IMMR + 0x002fc284)@h
-	ori	r4, r4, (CFG_IMMR + 0x002fc284)@l
-	lis	r3, CFG_PLPRCR@h
-	ori	r3, r3, CFG_PLPRCR@l
+	lis	r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
+	ori	r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
+	lis	r3, CONFIG_SYS_PLPRCR@h
+	ori	r3, r3, CONFIG_SYS_PLPRCR@l
 	stw	r3, 0(r4)
 	addis	r3,0,0x0
 	ori	r3,r3,0xA000