X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=cpu%2Fi386%2Fsc520_asm.S;h=59ed2b8d654ed4062b1cb3ad93baafb4e182427c;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=34322ea2514a3bef3551d92e066093128f9ee38e;hpb=71edc271816ec82cf0550dd6980be2da3cc2ad9e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index 34322ea..59ed2b8 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -460,21 +460,21 @@ emptybank:
 	incl    %edi
 	loop    cleanuplp
 
-#if defined CFG_SDRAM_DRCTMCTL
+#if defined CONFIG_SYS_SDRAM_DRCTMCTL
 	/* just have your hardware desinger _GIVE_ you what you need here! */
 	movl    $DRCTMCTL, %edi
-	movb    $CFG_SDRAM_DRCTMCTL,%al
+	movb    $CONFIG_SYS_SDRAM_DRCTMCTL,%al
 	movb    (%edi), %al
 #else
-#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
+#if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T)
 	/* set the CAS latency now since it is hard to do
 	 * when we run from the RAM */
 	movl    $DRCTMCTL, %edi          /* DRAM timing register */
 	movb    (%edi), %al
-#ifdef CFG_SDRAM_CAS_LATENCY_2T
+#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
 	andb    $0xef, %al
 #endif
-#ifdef CFG_SDRAM_CAS_LATENCY_3T
+#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
 	orb     $0x10, %al
 #endif
 	movb    %al, (%edi)
@@ -540,7 +540,7 @@ bank0:	movl	(%edi), %eax
 done:
 	movl	%ebx, %eax
 
-#if CFG_SDRAM_ECC_ENABLE
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
 	/* A nominal memory test: just a byte at each address line */
 	movl    %eax, %ecx
 	shrl    $0x1, %ecx