X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=cpu%2Fat32ap%2Fhsdramc.c;h=b6eae667c242ab0b22fe8cdcd54d7a01a9cdda61;hb=bb3bcfa2426cc6a0aecec7270e3ee67ca843a125;hp=1fcfe75d745768a881d1e3220a98542a2de6e000;hpb=92915741fc7c77175680e036965fb88d7552d743;p=platform%2Fkernel%2Fu-boot.git

diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c
index 1fcfe75..b6eae66 100644
--- a/cpu/at32ap/hsdramc.c
+++ b/cpu/at32ap/hsdramc.c
@@ -21,7 +21,6 @@
  */
 #include <common.h>
 
-#ifdef CFG_HSDRAMC
 #include <asm/io.h>
 #include <asm/sdram.h>
 
@@ -30,39 +29,32 @@
 
 #include "hsdramc1.h"
 
-unsigned long sdram_init(const struct sdram_info *info)
+unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
 {
-	unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
 	unsigned long sdram_size;
-	unsigned long tmp;
-	unsigned long bus_hz;
+	uint32_t cfgreg;
 	unsigned int i;
 
-	if (!info->refresh_period)
-		panic("ERROR: SDRAM refresh period == 0. "
-				"Please update the board code\n");
-
-	tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
-	       | HSDRAMC1_BF(NR, info->row_bits - 11)
-	       | HSDRAMC1_BF(NB, info->bank_bits - 1)
-	       | HSDRAMC1_BF(CAS, info->cas)
-	       | HSDRAMC1_BF(TWR, info->twr)
-	       | HSDRAMC1_BF(TRC, info->trc)
-	       | HSDRAMC1_BF(TRP, info->trp)
-	       | HSDRAMC1_BF(TRCD, info->trcd)
-	       | HSDRAMC1_BF(TRAS, info->tras)
-	       | HSDRAMC1_BF(TXSR, info->txsr));
-
-#ifdef CFG_SDRAM_16BIT
-	tmp |= HSDRAMC1_BIT(DBW);
-	sdram_size = 1 << (info->row_bits + info->col_bits
-			   + info->bank_bits + 1);
-#else
-	sdram_size = 1 << (info->row_bits + info->col_bits
-			   + info->bank_bits + 2);
-#endif
-
-	hsdramc1_writel(CR, tmp);
+	cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8)
+		       | HSDRAMC1_BF(NR, config->row_bits - 11)
+		       | HSDRAMC1_BF(NB, config->bank_bits - 1)
+		       | HSDRAMC1_BF(CAS, config->cas)
+		       | HSDRAMC1_BF(TWR, config->twr)
+		       | HSDRAMC1_BF(TRC, config->trc)
+		       | HSDRAMC1_BF(TRP, config->trp)
+		       | HSDRAMC1_BF(TRCD, config->trcd)
+		       | HSDRAMC1_BF(TRAS, config->tras)
+		       | HSDRAMC1_BF(TXSR, config->txsr));
+
+	if (config->data_bits == SDRAM_DATA_16BIT)
+		cfgreg |= HSDRAMC1_BIT(DBW);
+
+	hsdramc1_writel(CR, cfgreg);
+
+	/* Send a NOP to turn on the clock (necessary on some chips) */
+	hsdramc1_writel(MR, HSDRAMC1_MODE_NOP);
+	hsdramc1_readl(MR);
+	writel(0, sdram_base);
 
 	/*
 	 * Initialization sequence for SDRAM, from the data sheet:
@@ -77,7 +69,7 @@ unsigned long sdram_init(const struct sdram_info *info)
 	 */
 	hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
 	hsdramc1_readl(MR);
-	writel(0, sdram);
+	writel(0, sdram_base);
 
 	/*
 	 * 3. Eight auto-refresh (CBR) cycles are provided
@@ -85,60 +77,41 @@ unsigned long sdram_init(const struct sdram_info *info)
 	hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
 	hsdramc1_readl(MR);
 	for (i = 0; i < 8; i++)
-		writel(0, sdram);
+		writel(0, sdram_base);
 
 	/*
 	 * 4. A mode register set (MRS) cycle is issued to program
 	 *    SDRAM parameters, in particular CAS latency and burst
 	 *    length.
 	 *
-	 * CAS from info struct, burst length 1, serial burst type
+	 * The address will be chosen by the SDRAMC automatically; we
+	 * just have to make sure BA[1:0] are set to 0.
 	 */
 	hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
 	hsdramc1_readl(MR);
-	writel(0, sdram + (info->cas << 4));
+	writel(0, sdram_base);
 
 	/*
-	 * 5. A Normal Mode command is provided, 3 clocks after tMRD
-	 *    is met.
-	 *
-	 * From the timing diagram, it looks like tMRD is 3
-	 * cycles...try a dummy read from the peripheral bus.
+	 * 5. The application must go into Normal Mode, setting Mode
+	 *    to 0 in the Mode Register and performing a write access
+	 *    at any location in the SDRAM.
 	 */
-	hsdramc1_readl(MR);
 	hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
 	hsdramc1_readl(MR);
-	writel(0, sdram);
+	writel(0, sdram_base);
 
 	/*
 	 * 6. Write refresh rate into SDRAMC refresh timer count
 	 *    register (refresh rate = timing between refresh cycles).
-	 *
-	 * 15.6 us is a typical value for a burst of length one
 	 */
-	bus_hz = get_sdram_clk_rate();
-	hsdramc1_writel(TR, info->refresh_period);
-
-	printf("SDRAM: %u MB at address 0x%08lx\n",
-	       sdram_size >> 20, info->phys_addr);
-
-	printf("Testing SDRAM...");
-	for (i = 0; i < sdram_size / 4; i++)
-		sdram[i] = i;
+	hsdramc1_writel(TR, config->refresh_period);
 
-	for (i = 0; i < sdram_size / 4; i++) {
-		tmp = sdram[i];
-		if (tmp != i) {
-			printf("FAILED at address 0x%08lx\n",
-			       info->phys_addr + i * 4);
-			printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
-			return 0;
-		}
-	}
-
-	puts("OK\n");
+	if (config->data_bits == SDRAM_DATA_16BIT)
+		sdram_size = 1 << (config->row_bits + config->col_bits
+				   + config->bank_bits + 1);
+	else
+		sdram_size = 1 << (config->row_bits + config->col_bits
+				   + config->bank_bits + 2);
 
 	return sdram_size;
 }
-
-#endif /* CFG_HSDRAMC */