X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configure.ac;h=4bb4865d84fa9cb003d450864d00db21c3201876;hb=13f2298f13f2b1e57d177898c49ee8f4f3216fab;hp=a536c5ebcc5c49662c12632d97e795726c0e6e79;hpb=82ae827f9b172b560568b814719b0cf0e56d0375;p=platform%2Fupstream%2Fbinutils.git

diff --git a/configure.ac b/configure.ac
index a536c5e..4bb4865 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,5 +1,5 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-#   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
+#   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
 #   Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
@@ -28,6 +28,7 @@ m4_include([ltoptions.m4])
 m4_include([ltsugar.m4])
 m4_include([ltversion.m4])
 m4_include([lt~obsolete.m4])
+m4_include([config/isl.m4])
 m4_include([config/cloog.m4])
 
 AC_INIT(move-if-change)
@@ -132,7 +133,7 @@ build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl cloog libelf libiconv"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -149,14 +150,18 @@ libgcj="target-libffi \
 
 # these libraries are built for the target environment, and are built after
 # the host libraries and the host tools (which may be a cross compiler)
-#
+# Note that libiberty is not a target library.
 target_libraries="target-libgcc \
-		target-libiberty \
+		target-libbacktrace \
 		target-libgloss \
 		target-newlib \
 		target-libgomp \
+		target-libcilkrts \
+		target-libatomic \
+		target-libitm \
 		target-libstdc++-v3 \
-		target-libmudflap \
+		target-libsanitizer \
+		target-libvtv \
 		target-libssp \
 		target-libquadmath \
 		target-libgfortran \
@@ -311,9 +316,9 @@ case "${ENABLE_GOLD}" in
     is_elf=no
     case "${target}" in
       *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
-      | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
+      | *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
       | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
-      | *-*-solaris2* | *-*-nto*)
+      | *-*-solaris2* | *-*-nto* | *-*-nacl*)
         case "${target}" in
           *-*-linux*aout* | *-*-linux*oldld*)
             ;;
@@ -326,7 +331,8 @@ case "${ENABLE_GOLD}" in
     if test "$is_elf" = "yes"; then
       # Check for target supported by gold.
       case "${target}" in
-        i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
+        i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
+        | aarch64*-*-* | tilegx*-*-*)
 	  configdirs="$configdirs gold"
 	  if test x${ENABLE_GOLD} = xdefault; then
 	    default_ld=gold
@@ -424,6 +430,15 @@ AC_ARG_ENABLE(libssp,
 ENABLE_LIBSSP=$enableval,
 ENABLE_LIBSSP=yes)
 
+AC_ARG_ENABLE(libstdcxx,
+AS_HELP_STRING([--disable-libstdcxx],
+  [do not build libstdc++-v3 directory]),
+ENABLE_LIBSTDCXX=$enableval,
+ENABLE_LIBSTDCXX=default)
+[if test "${ENABLE_LIBSTDCXX}" = "no" ; then
+  noconfigdirs="$noconfigdirs libstdc++-v3"
+fi]
+
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
 libgcj_saved=$libgcj
@@ -444,22 +459,20 @@ no)
   ;;
 esac
 
+AC_ARG_ENABLE(static-libjava,
+[AS_HELP_STRING([[--enable-static-libjava[=ARG]]],
+		[build static libjava @<:@default=no@:>@])],
+ENABLE_STATIC_LIBJAVA=$enableval,
+ENABLE_STATIC_LIBJAVA=no)
+enable_static_libjava=
+if test "${ENABLE_STATIC_LIBJAVA}" = "yes" ; then
+  enable_static_libjava=yes
+fi
 
-# Disable libmudflap on some systems.
-if test x$enable_libmudflap = x ; then
-    case "${target}" in
-    *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu)
-        # Enable libmudflap by default in GNU and friends.
-	;;
-    *-*-freebsd*)
-        # Enable libmudflap by default in FreeBSD.
-	;;
-    *)
-        # Disable it by default everywhere else.
-	noconfigdirs="$noconfigdirs target-libmudflap"
-	;;
-    esac
+if test x$enable_static_libjava != xyes ; then
+  EXTRA_CONFIGARGS_LIBJAVA=--disable-static
 fi
+AC_SUBST(EXTRA_CONFIGARGS_LIBJAVA)
 
 # Disable libgomp on non POSIX hosted systems.
 if test x$enable_libgomp = x ; then
@@ -469,7 +482,7 @@ if test x$enable_libgomp = x ; then
 	;;
     *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
 	;;
-    *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+    *-*-solaris2* | *-*-hpux11*)
 	;;
     *-*-darwin* | *-*-aix*)
 	;;
@@ -479,76 +492,132 @@ if test x$enable_libgomp = x ; then
     esac
 fi
 
-# Disable libssp for some systems.
+# Disable libatomic on unsupported systems.
+if test -d ${srcdir}/libatomic; then
+    if test x$enable_libatomic = x; then
+	AC_MSG_CHECKING([for libatomic support])
+	if (srcdir=${srcdir}/libatomic; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    AC_MSG_RESULT([no])
+	    noconfigdirs="$noconfigdirs target-libatomic"
+	else
+	    AC_MSG_RESULT([yes])
+	fi
+    fi
+fi
+
+# Disable libcilkrts on unsupported systems.
+if test -d ${srcdir}/libcilkrts; then
+    if test x$enable_libcilkrts = x; then
+	AC_MSG_CHECKING([for libcilkrts support])
+	if (srcdir=${srcdir}/libcilkrts; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    AC_MSG_RESULT([no])
+	    noconfigdirs="$noconfigdirs target-libcilkrts"
+	else
+	    AC_MSG_RESULT([yes])
+	fi
+    fi
+fi
+
+# Disable libitm on unsupported systems.
+if test -d ${srcdir}/libitm; then
+    if test x$enable_libitm = x; then
+	AC_MSG_CHECKING([for libitm support])
+	if (srcdir=${srcdir}/libitm; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    AC_MSG_RESULT([no])
+	    noconfigdirs="$noconfigdirs target-libitm"
+	else
+	    AC_MSG_RESULT([yes])
+	fi
+    fi
+fi
+
+# Disable libsanitizer on unsupported systems.
+if test -d ${srcdir}/libsanitizer; then
+    if test x$enable_libsanitizer = x; then
+	AC_MSG_CHECKING([for libsanitizer support])
+	if (srcdir=${srcdir}/libsanitizer; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    AC_MSG_RESULT([no])
+	    noconfigdirs="$noconfigdirs target-libsanitizer"
+	else
+	    AC_MSG_RESULT([yes])
+	fi
+    fi
+fi
+
+# Disable libvtv on unsupported systems.
+if test -d ${srcdir}/libvtv; then
+    if test x$enable_libvtv = x; then
+	AC_MSG_CHECKING([for libvtv support])
+	if (srcdir=${srcdir}/libvtv; \
+		. ${srcdir}/configure.tgt; \
+		test "$VTV_SUPPORTED" != "yes")
+	then
+	    AC_MSG_RESULT([no])
+	    noconfigdirs="$noconfigdirs target-libvtv"
+	else
+	    AC_MSG_RESULT([yes])
+	fi
+    fi
+fi
+
+# Disable libquadmath for some systems.
 case "${target}" in
   avr-*-*)
-    # No hosted I/O support.
-    noconfigdirs="$noconfigdirs target-libssp"
+    noconfigdirs="$noconfigdirs target-libquadmath"
     ;;
+  # libquadmath is unused on AIX and libquadmath build process use of
+  # LD_LIBRARY_PATH can break AIX bootstrap.
   powerpc-*-aix* | rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs target-libssp"
+    noconfigdirs="$noconfigdirs target-libquadmath"
     ;;
 esac
 
-# Disable target libiberty for some systems.
+# Disable libssp for some systems.
 case "${target}" in
-  *-*-kaos*)
-    # Remove unsupported stuff on all kaOS configurations.
-    skipdirs="target-libiberty"
-    ;;
-  *-*-netbsd*)
-    # Skip some stuff on all NetBSD configurations.
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
-  *-*-netware*)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
-  *-*-rtems*)
-    skipdirs="${skipdirs} target-libiberty"
-    ;;
-  *-*-tpf*)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
-  *-*-vxworks*)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
-  sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
-  arm*-*-symbianelf*)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
   avr-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
-  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
-  picochip-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty"
+    # No hosted I/O support.
+    noconfigdirs="$noconfigdirs target-libssp"
     ;;
-  mips*-sde-elf*)
-    skipdirs="$skipdirs target-libiberty"
+  powerpc-*-aix* | rs6000-*-aix*)
+    noconfigdirs="$noconfigdirs target-libssp"
     ;;
-  ip2k-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty"
+  rl78-*-*)
+    # libssp uses a misaligned load to trigger a fault, but the RL78
+    # doesn't fault for those - instead, it gives a build-time error
+    # for explicit misaligned loads.
+    noconfigdirs="$noconfigdirs target-libssp"
     ;;
 esac
 
 # Disable libstdc++-v3 for some systems.
-case "${target}" in
-  *-*-vxworks*)
-    # VxWorks uses the Dinkumware C++ library.
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
-    ;;
-  arm*-wince-pe*)
-    # the C++ libraries don't build on top of CE's C libraries
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
-    ;;
-  avr-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
-    ;;
-esac
+# Allow user to override this if they pass --enable-libstdc++-v3
+if test "${ENABLE_LIBSTDCXX}" = "default" ; then
+  case "${target}" in
+    *-*-vxworks*)
+      # VxWorks uses the Dinkumware C++ library.
+      noconfigdirs="$noconfigdirs target-libstdc++-v3"
+      ;;
+    arm*-wince-pe*)
+      # the C++ libraries don't build on top of CE's C libraries
+      noconfigdirs="$noconfigdirs target-libstdc++-v3"
+      ;;
+    avr-*-*)
+      noconfigdirs="$noconfigdirs target-libstdc++-v3"
+      ;;
+  esac
+fi
 
 # Disable Fortran for some systems.
 case "${target}" in
@@ -560,6 +629,8 @@ esac
 
 # Disable Java if libffi is not supported.
 case "${target}" in
+  aarch64-*-*)
+    ;;
   alpha*-*-*)
     ;;
   arm*-*-*)
@@ -580,7 +651,7 @@ case "${target}" in
     ;;
   m68k-*-*)
     ;;
-  mips-sgi-irix6.* | mips*-*-rtems*)
+  mips*-*-rtems*)
     ;;
   mips*-*-linux*)
     ;;
@@ -696,25 +767,137 @@ case "${target}" in
   rs6000-*-aix*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  mips*-*-irix6*)
-    # Linking libjava exceeds command-line length limits on at least
-    # IRIX 6.2, but not on IRIX 6.5.
-    # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
-    # <oldham@codesourcery.com>
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
   *-*-lynxos*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;; 
 esac
 
+# Disable libgo for some systems where it is known to not work.
+# For testing, you can easily override this with --enable-libgo.
+if test x$enable_libgo = x; then
+    case "${target}" in
+    *-*-darwin*)
+	# PR 46986
+	noconfigdirs="$noconfigdirs target-libgo"
+	;;
+    *-*-cygwin* | *-*-mingw*)
+	noconfigdirs="$noconfigdirs target-libgo"
+	;;
+    *-*-aix*)
+	noconfigdirs="$noconfigdirs target-libgo"
+	;;
+    esac
+fi
+
 # Default libgloss CPU subdirectory.
 libgloss_dir="$target_cpu"
 
 case "${target}" in
+  sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+    libgloss_dir=wince
+    ;;
+  aarch64*-*-* )
+    libgloss_dir=aarch64
+    ;;
+  arm*-*-*)
+    libgloss_dir=arm
+    ;;
+  cris-*-* | crisv32-*-*)
+    libgloss_dir=cris
+    ;;
+  hppa*-*-*)
+    libgloss_dir=pa
+    ;;
+  i[[3456789]]86-*-*)
+    libgloss_dir=i386
+    ;;
+  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+    libgloss_dir=m68hc11
+    ;;
+  m68*-*-* | fido-*-*)
+    libgloss_dir=m68k
+    ;;
+  mips*-*-*)
+    libgloss_dir=mips
+    ;;
+  powerpc*-*-*)
+    libgloss_dir=rs6000
+    ;;
+  sparc*-*-*)
+    libgloss_dir=sparc
+    ;;
+esac
+
+# Disable newlib and libgloss for various target OSes.
+case "${target}" in
+  alpha*-dec-osf*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  i[[3456789]]86-*-linux*)
+    # This section makes it possible to build newlib natively on linux.
+    # If we are using a cross compiler then don't configure newlib.
+    if test x${is_cross_compiler} != xno ; then
+      noconfigdirs="$noconfigdirs target-newlib"
+    fi
+    noconfigdirs="$noconfigdirs target-libgloss"
+    # If we are not using a cross compiler, do configure newlib.
+    # Note however, that newlib will only be configured in this situation
+    # if the --with-newlib option has been given, because otherwise
+    # 'target-newlib' will appear in skipdirs.
+    ;;
+  i[[3456789]]86-*-rdos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  sh*-*-pe|mips*-*-pe|arm-wince-pe)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  sparc-*-sunos4*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-aix*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-beos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
   *-*-chorusos)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
+  *-*-dragonfly*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-freebsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-lynxos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;; 
+  *-*-mingw*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-netbsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-netware*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-tpf*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-uclinux*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-vxworks*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+esac
+
+case "${target}" in
+  *-*-chorusos)
+    ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
@@ -732,10 +915,8 @@ case "${target}" in
     noconfigdirs="$noconfigdirs sim target-rda"
     ;;
   *-*-dragonfly*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-freebsd*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
 	&& test -f /usr/local/include/gmp.h; then
       with_gmp=/usr/local
@@ -746,80 +927,55 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   *-*-netbsd*)
-    # Skip some stuff on all NetBSD configurations.
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-netware*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-rtems*)
     noconfigdirs="$noconfigdirs target-libgloss"
+    # this is not caught below because this stanza matches earlier
+    case $target in
+      or1k*-*-*) noconfigdirs="$noconfigdirs gdb" ;;
+    esac
     ;;
     # The tpf target doesn't support gdb yet.
   *-*-tpf*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss gdb tcl tk libgui itcl"
+    noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl"
     ;;
   *-*-uclinux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda"
+    noconfigdirs="$noconfigdirs target-rda"
     ;;
   *-*-vxworks*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
-    # newlib is not 64 bit ready.
     # gas doesn't generate exception information.
-    noconfigdirs="$noconfigdirs gas ld target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs gas ld"
     ;;
   alpha*-*-*vms*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     ;;
-  alpha*-*-linux*)
-    # newlib is not 64 bit ready
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
   alpha*-*-*)
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  am33_2.0-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
-  sh-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;    
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
     noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
-    noconfigdirs="$noconfigdirs target-newlib"
-    libgloss_dir=wince
     ;;
-  arc-*-*)
+  arc-*-*|arceb-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-  arm-*-coff)
-    libgloss_dir=arm
-    ;;
-  arm-*-elf* | arm*-*-eabi* )
-    libgloss_dir=arm
-    ;;
-  arm*-*-linux-gnueabi)
-    case ${with_newlib} in
-      no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    esac
-    libgloss_dir=arm
-    ;;
-  arm*-*-symbianelf*)
-    libgloss_dir=arm
-    ;;
   arm-*-pe*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   arm-*-riscix*)
     noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
-  avr-*-*)
+  avr-*-rtems*)
     ;;
-  bfin-*-*)
+  avr-*-*)
+    if test x${with_avrlibc} != xno; then
+      noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    fi
     ;;
   c4x-*-* | tic4x-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
@@ -827,16 +983,6 @@ case "${target}" in
   tic54x-*-*)
     noconfigdirs="$noconfigdirs target-libgloss gdb"
     ;;
-  cr16-*-*)
-    noconfigdirs="$noconfigdirs gdb"
-    ;;
-  cris-*-* | crisv32-*-*)
-    case "${target}" in
-      *-*-linux*)
-	noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
-    esac
-    libgloss_dir=cris
-    ;;
   d10v-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
@@ -846,8 +992,6 @@ case "${target}" in
   fr30-*-elf*)
     noconfigdirs="$noconfigdirs gdb"
     ;;
-  frv-*-*)
-    ;;
   moxie-*-*)
     noconfigdirs="$noconfigdirs gprof"
     ;;
@@ -872,7 +1016,6 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld"
     ;;
   hppa*-*-pro*)
-    libgloss_dir=pa
     ;;
   hppa*-*-*)
     noconfigdirs="$noconfigdirs ld"
@@ -889,33 +1032,13 @@ case "${target}" in
     noconfigdirs="$noconfigdirs libgui itcl ld"
     ;;
   ia64*-*-*vms*)
-    # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs readline libgui itcl gdb ld"
-    ;;
-  i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
-    libgloss_dir=i386
-    ;;
-  i[[3456789]]86-*-linux*)
-    # This section makes it possible to build newlib natively on linux.
-    # If we are using a cross compiler then don't configure newlib.
-    if test x${is_cross_compiler} != xno ; then
-      noconfigdirs="$noconfigdirs target-newlib"
-    fi
-    noconfigdirs="$noconfigdirs target-libgloss"
-    # If we are not using a cross compiler, do configure newlib.
-    # Note however, that newlib will only be configured in this situation
-    # if the --with-newlib option has been given, because otherwise
-    # 'target-newlib' will appear in skipdirs.
+    # No ld support yet.
+    noconfigdirs="$noconfigdirs libgui itcl ld"
     ;;
   i[[3456789]]86-w64-mingw*)
-    noconfigdirs="$noconfigdirs target-libgloss target-newlib"
     ;;
   i[[3456789]]86-*-mingw*)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs target-libgloss target-newlib"
-    ;;
-  x86_64-*-mingw*)
-    noconfigdirs="$noconfigdirs target-libgloss target-newlib"
     ;;
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
@@ -927,8 +1050,6 @@ case "${target}" in
       echo "Warning: winsup/cygwin is missing so newlib can't be built."
     fi
     ;;
-  i[[3456789]]86-*-interix* )
-    ;;
   i[[3456789]]86-*-pe)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
@@ -940,27 +1061,17 @@ case "${target}" in
   i[[3456789]]86-*-sco*)
     noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
-  i[[3456789]]86-*-solaris2*)
+  i[[3456789]]86-*-solaris2* | x86_64-*-solaris2.1[[0-9]]*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[[3456789]]86-*-sysv4*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[[3456789]]86-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   i[[3456789]]86-*-rdos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
-    ;;
-  m32r-*-*)
-    ;;
-  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
-    libgloss_dir=m68hc11
-    ;;
-  m68k-*-elf*)
-    ;;
-  m68*-*-* | fido-*-*)
-    libgloss_dir=m68k
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   mmix-*-*)
     noconfigdirs="$noconfigdirs gdb"
@@ -970,7 +1081,7 @@ case "${target}" in
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe*)
     target_configdirs="$target_configdirs target-winsup"
@@ -981,22 +1092,15 @@ case "${target}" in
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
     noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
-    libgloss_dir=rs6000
     ;;
   powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
-    ;;
-  powerpc-*-eabi)
-    libgloss_dir=rs6000
-    ;;
-  powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
-    libgloss_dir=rs6000
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   rs6000-*-lynxos*)
-    noconfigdirs="$noconfigdirs target-newlib gprof"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   rs6000-*-*)
     noconfigdirs="$noconfigdirs gprof"
@@ -1007,11 +1111,10 @@ case "${target}" in
   microblaze*)
     noconfigdirs="$noconfigdirs gprof"
     ;;
-  mips*-sde-elf*)
+  mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
     if test x$with_newlib = xyes; then
       noconfigdirs="$noconfigdirs gprof"
     fi
-    libgloss_dir=mips
     ;;
   mips*-*-irix5*)
     noconfigdirs="$noconfigdirs gprof target-libgloss"
@@ -1020,14 +1123,22 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   mips*-*-bsd*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss"
+    noconfigdirs="$noconfigdirs ld gas gprof target-libgloss"
     ;;
   mips*-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  mips*-*-ultrix* | mips*-*-osf* | mips*-*-ecoff* | mips*-*-pe* \
+  | mips*-*-irix* | mips*-*-lnews* | mips*-*-riscos*)
+    noconfigdirs="$noconfigdirs ld gas gprof"
     ;;
   mips*-*-*)
     noconfigdirs="$noconfigdirs gprof"
-    libgloss_dir=mips
+    ;;
+  nds32*-*-*)
+    noconfigdirs="$noconfigdirs gdb"
+    ;;
+  or1k*-*-*)
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   sh-*-* | sh64-*-*)
     case "${target}" in
@@ -1037,28 +1148,16 @@ case "${target}" in
          noconfigdirs="$noconfigdirs target-libgloss" ;;
     esac
     ;;
-  sparclet-*-aout* | sparc86x-*-*)
-    libgloss_dir=sparc
-    ;;
-  sparc-*-elf*)
-    ;;
-  sparc64-*-elf*)
-    libgloss_dir=sparc
-    ;;
-  sparclite-*-*)
-    libgloss_dir=sparc
-    ;;
   sparc-*-sunos4*)
-    if test x${is_cross_compiler} != xno ; then
-           noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
-    else
+    if test x${is_cross_compiler} = xno ; then
            use_gnu_ld=no
     fi
     ;;
-  sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
-    ;;
   tic6x-*-*)
-    noconfigdirs="$noconfigdirs gdb sim"
+    noconfigdirs="$noconfigdirs sim"
+    ;;
+  tilepro*-*-* | tilegx*-*-*)
+    noconfigdirs="$noconfigdirs sim"
     ;;
   v810-*-*)
     noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
@@ -1066,14 +1165,6 @@ case "${target}" in
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
-  *-*-lynxos*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;; 
-  *-*-*)
-    ;;
 esac
 
 # If we aren't building newlib, then don't build libgloss, since libgloss
@@ -1097,9 +1188,6 @@ case "${host}" in
   *-mingw*)
     host_makefile_frag="config/mh-mingw"
     ;;
-  *-interix*)
-    host_makefile_frag="config/mh-interix"
-    ;;
   hppa*-hp-hpux10*)
     host_makefile_frag="config/mh-pa-hpux10"
     ;;
@@ -1173,15 +1261,71 @@ if test -z "$LD"; then
   fi
 fi
 
-ACX_PROG_GNAT
-ACX_PROG_CMP_IGNORE_INITIAL
+# Check whether -static-libstdc++ -static-libgcc is supported.
+have_static_libs=no
+if test "$GCC" = yes; then
+  saved_LDFLAGS="$LDFLAGS"
+
+  LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
+  AC_MSG_CHECKING([whether g++ accepts -static-libstdc++ -static-libgcc])
+  AC_LANG_PUSH(C++)
+  AC_LINK_IFELSE([
+#if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+#error -static-libstdc++ not implemented
+#endif
+int main() {}],
+    [AC_MSG_RESULT([yes]); have_static_libs=yes],
+    [AC_MSG_RESULT([no])])
+  AC_LANG_POP(C++)
+
+  LDFLAGS="$saved_LDFLAGS"
+fi
+
+ACX_PROG_GNAT
+ACX_PROG_CMP_IGNORE_INITIAL
+
+AC_ARG_ENABLE([bootstrap],
+[AS_HELP_STRING([--enable-bootstrap],
+		[enable bootstrapping @<:@yes if native build@:>@])],,
+enable_bootstrap=default)
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+if test -r $srcdir/gcc/configure; then
+  have_compiler=yes
+else
+  have_compiler=no
+fi
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+  *:*:*:no) ;;
+
+  # Default behavior.  Enable bootstrap if we have a compiler
+  # and we are in a native configuration.
+  yes:$build:$build:default)
+    enable_bootstrap=yes ;;
+
+  *:*:*:default)
+    enable_bootstrap=no ;;
+
+  # We have a compiler and we are in a native configuration, bootstrap is ok
+  yes:$build:$build:yes)
+    ;;
+
+  # Other configurations, but we have a compiler.  Assume the user knows
+  # what he's doing.
+  yes:*:*:yes)
+    AC_MSG_WARN([trying to bootstrap a cross compiler])
+    ;;
 
-# See if we are building gcc with C++.
-AC_ARG_ENABLE(build-with-cxx,
-[AS_HELP_STRING([--enable-build-with-cxx],
-		[build with C++ compiler instead of C compiler])],
-ENABLE_BUILD_WITH_CXX=$enableval,
-ENABLE_BUILD_WITH_CXX=no)
+  # No compiler: if they passed --enable-bootstrap explicitly, fail
+  no:*:*:yes)
+    AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
+
+  # Fail if wrong command line
+  *)
+    AC_MSG_ERROR([invalid option for --enable-bootstrap])
+    ;;
+esac
 
 # Used for setting $lt_cv_objdir
 _LT_CHECK_OBJDIR
@@ -1255,9 +1399,16 @@ if test "x$with_mpfr_lib" != x; then
   gmplibs="-L$with_mpfr_lib $gmplibs"
 fi
 if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
-  gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
-  gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
-  extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
+  # MPFR v3.1.0 moved the sources into a src sub-directory.
+  if test -d ${srcdir}/mpfr/src; then
+    gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir $gmplibs"
+    gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr/src -I$$s/mpfr/src '"$gmpinc"
+    extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr/src --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir"
+  else
+    gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
+    gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
+    extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
+  fi
   # Do not test the mpfr version.  Assume that it is sufficient, since
   # it is in the source tree, and the library has not been built yet
   # but it would be included on the link line in the version check below
@@ -1299,6 +1450,7 @@ if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp;
   gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
   extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
   extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
+  extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
   # Do not test the gmp version.  Assume that it is sufficient, since
   # it is in the source tree, and the library has not been built yet
   # but it would be included on the link line in the version check below
@@ -1315,7 +1467,7 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
   AC_TRY_COMPILE([#include "gmp.h"],[
   #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
   #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
-  #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,0)
+  #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,3)
   choke me
   #endif
   ], [AC_TRY_COMPILE([#include <gmp.h>],[
@@ -1333,7 +1485,7 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
     AC_MSG_CHECKING([for the correct version of mpfr.h])
     AC_TRY_COMPILE([#include <gmp.h>
     #include <mpfr.h>],[
-    #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
+    #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
     choke me
     #endif
     ], [AC_TRY_COMPILE([#include <gmp.h>
@@ -1393,7 +1545,7 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
 # The library versions listed in the error message below should match
 # the HARD-minimums enforced above.
   if test x$have_gmp != xyes; then
-    AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+.
+    AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
 Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
 their locations.  Source code for these libraries can be found at
 their respective hosting sites as well as at
@@ -1411,6 +1563,7 @@ AC_SUBST(gmpinc)
 AC_SUBST(extra_mpfr_configure_flags)
 AC_SUBST(extra_mpc_gmp_configure_flags)
 AC_SUBST(extra_mpc_mpfr_configure_flags)
+AC_SUBST(extra_isl_gmp_configure_flags)
 
 # Allow host libstdc++ to be specified for static linking with PPL.
 AC_ARG_WITH(host-libstdcxx,
@@ -1424,17 +1577,6 @@ case $with_host_libstdcxx in
     ;;
 esac
 
-# Linker flags to use for stage1 or when not boostrapping.
-AC_ARG_WITH(stage1-ldflags,
-[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
-[if test "$withval" = "no" -o "$withval" = "yes"; then
-   stage1_ldflags=
- else
-   stage1_ldflags=$withval
- fi],
-[stage1_ldflags=])
-AC_SUBST(stage1_ldflags)
-
 # Libraries to use for stage1 or when not bootstrapping.
 AC_ARG_WITH(stage1-libs,
 [AS_HELP_STRING([--with-stage1-libs=LIBS], [libraries for stage1])],
@@ -1446,6 +1588,23 @@ AC_ARG_WITH(stage1-libs,
 [stage1_libs=$with_host_libstdcxx])
 AC_SUBST(stage1_libs)
 
+# Linker flags to use for stage1 or when not bootstrapping.
+AC_ARG_WITH(stage1-ldflags,
+[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
+[if test "$withval" = "no" -o "$withval" = "yes"; then
+   stage1_ldflags=
+ else
+   stage1_ldflags=$withval
+ fi],
+[stage1_ldflags=
+ # In stage 1, default to linking libstdc++ and libgcc statically with GCC
+ # if supported.  But if the user explicitly specified the libraries to use,
+ # trust that they are doing what they want.
+ if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
+   stage1_ldflags="-static-libstdc++ -static-libgcc"
+ fi])
+AC_SUBST(stage1_ldflags)
+
 # Libraries to use for stage2 and later builds.  This defaults to the
 # argument passed to --with-host-libstdcxx.
 AC_ARG_WITH(boot-libs,
@@ -1476,118 +1635,76 @@ AC_ARG_WITH(boot-ldflags,
  fi])
 AC_SUBST(poststage1_ldflags)
 
-# Check for PPL
-ppllibs=
-pplinc=
-pwllib=
-
-AC_ARG_WITH(ppl,
-[AS_HELP_STRING([--with-ppl=PATH],
-		[specify prefix directory for the installed PPL package.
-		 Equivalent to --with-ppl-include=PATH/include
-		 plus --with-ppl-lib=PATH/lib])])
-AC_ARG_WITH(ppl-include,
-[AS_HELP_STRING([--with-ppl-include=PATH],
-		[specify directory for installed PPL include files])])
-AC_ARG_WITH(ppl-lib,
-[AS_HELP_STRING([--with-ppl-lib=PATH],
-		[specify directory for the installed PPL library])])
-
-AC_ARG_ENABLE(ppl-version-check,
-[AS_HELP_STRING([--disable-ppl-version-check],
-		[disable check for PPL version])])
-
-case $with_ppl in
-  yes | no | "")
-    ;;
-  *)
-    ppllibs="-L$with_ppl/lib"
-    pplinc="-I$with_ppl/include $pplinc"
-    if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
-      with_ppl=yes
-    else
-      AC_MSG_ERROR([cannot find directories "$with_ppl/lib" or "$with_ppl/include"])
+# GCC GRAPHITE dependences, ISL and CLOOG which in turn requires ISL.
+# Basic setup is inlined here, actual checks are in config/cloog.m4 and
+# config/isl.m4
+
+AC_ARG_WITH(cloog,
+  [AS_HELP_STRING(
+    [--with-cloog=PATH],
+    [Specify prefix directory for the installed CLooG-ISL package.
+     Equivalent to --with-cloog-include=PATH/include
+     plus --with-cloog-lib=PATH/lib])])
+AC_ARG_WITH(isl,
+  [AS_HELP_STRING(
+   [--with-isl=PATH],
+   [Specify prefix directory for the installed ISL package.
+    Equivalent to --with-isl-include=PATH/include
+    plus --with-isl-lib=PATH/lib])])
+
+# Treat either --without-cloog or --without-isl as a request to disable
+# GRAPHITE support and skip all following checks.
+if test "x$with_isl" != "xno" &&
+   test "x$with_cloog" != "xno"; then
+  # Check for ISL
+  dnl Provide configure switches and initialize islinc & isllibs
+  dnl with user input.
+  ISL_INIT_FLAGS
+  dnl The versions of ISL that work for Graphite
+  ISL_CHECK_VERSION(0,10)
+  if test "${gcc_cv_isl}" = no ; then
+    ISL_CHECK_VERSION(0,11)
+    if test "${gcc_cv_isl}" = no ; then
+      ISL_CHECK_VERSION(0,12)
     fi
-    ;;
-esac
-
-if test x"$with_ppl_include" != x; then
-  pplinc="-I$with_ppl_include $pplinc"
-  with_ppl=yes
-fi
-
-if test "x$with_ppl_lib" != x; then
-  ppllibs="-L$with_ppl_lib"
-  with_ppl=yes
-fi
-
-if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
-  if test x"$enable_watchdog" = xyes; then
-    pwllib="-lpwl"
   fi
-  ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
-  pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
-  enable_ppl_version_check=no
-  with_ppl=yes
-fi
-
-if test "x$with_ppl" != xno; then
-  if test "x$pwllib" = x; then
-    saved_LIBS="$LIBS"
-    LIBS="$LIBS $ppllibs -lstdc++ -lm"
-    AC_CHECK_LIB(pwl, PWL_handle_timeout, [pwllib="-lpwl"])
-    LIBS="$saved_LIBS"
-  fi
-
-  ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
+  dnl Only execute fail-action, if ISL has been requested.
+  ISL_IF_FAILED([
+    AC_MSG_ERROR([Unable to find a usable ISL.  See config.log for details.])])
+
+  if test "x$gcc_cv_isl" != "xno"; then
+    # Check for CLOOG
+    dnl Provide configure switches and initialize clooginc & clooglibs
+    dnl with user input.
+    CLOOG_INIT_FLAGS
+    dnl The versions of CLooG that work for Graphite.
+    CLOOG_CHECK_VERSION(0,17,0)
+    if test "${gcc_cv_cloog}" = no ; then
+      CLOOG_CHECK_VERSION(0,18,0)
+    fi
 
-  if test "$enable_ppl_version_check" != no; then
-    saved_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS $pplinc $gmpinc"
-    AC_MSG_CHECKING([for version 0.11 (revision 0 or later) of PPL])
-    AC_TRY_COMPILE([#include "ppl_c.h"],[
-    #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
-    choke me
-    #endif
-    ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
-    CFLAGS="$saved_CFLAGS"
+    dnl Only execute fail-action, if CLooG has been requested.
+    CLOOG_IF_FAILED([
+      AC_MSG_ERROR([Unable to find a usable CLooG.  See config.log for details.])])
   fi
 fi
 
-# Flags needed for PPL
-AC_SUBST(ppllibs)
-AC_SUBST(pplinc)
-
-
-# Check for CLOOG
-
-dnl Provide configure switches and initialize clooginc & clooglibs
-dnl with user input.
-CLOOG_INIT_FLAGS
-if test "x$with_ppl" = "xno"; then
-  dnl Only execute fail-action, if CLooG has been requested.
-  CLOOG_REQUESTED([graphite_requested=yes], [graphite_requested=no])
-  if test "${graphite_requested}" = yes; then
-    AC_MSG_ERROR([Unable to find a usable PPL.  See config.log for details.])
-  fi
-  with_cloog=no
-fi
-if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
-  && test "x${with_cloog_lib}" = x && test -d ${srcdir}/cloog; then
-  clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' '
-  clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
+# If either the ISL or the CLooG check failed, disable builds of in-tree
+# variants of both
+if test "x$with_isl" = xno ||
+   test "x$with_cloog" = xno ||
+   test "x$gcc_cv_cloog" = xno ||
+   test "x$gcc_cv_isl" = xno; then
+  noconfigdirs="$noconfigdirs cloog isl"
+  islinc=
+  clooginc=
+  clooglibs=
 fi
-if test "x$with_cloog" != "xno"; then
-  dnl The minimal version of CLooG required for Graphite.
-  dnl
-  dnl If we use CLooG-Legacy, the provided version information is
-  dnl ignored.
-  CLOOG_CHECK_VERSION(0,16,1)
 
-  dnl Only execute fail-action, if CLooG has been requested.
-  CLOOG_IF_FAILED([
-    AC_MSG_ERROR([Unable to find a usable CLooG.  See config.log for details.])])
-fi
+AC_SUBST(islinc)
+AC_SUBST(clooglibs)
+AC_SUBST(clooginc)
+
 
 # Check for LTO support.
 AC_ARG_ENABLE(lto,
@@ -1626,7 +1743,7 @@ ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
 ])
 
 
-# By default, C is the only stage 1 language.
+# By default, C and C++ are the only stage 1 languages.
 stage1_languages=,c,
 
 # Target libraries that we bootstrap.
@@ -1664,6 +1781,18 @@ if test -d ${srcdir}/gcc; then
       ;;
   esac
 
+  # If bootstrapping, C++ must be enabled.
+  case ",$enable_languages,:$enable_bootstrap" in
+    *,c++,*:*) ;;
+    *:yes)
+      if test -f ${srcdir}/gcc/cp/config-lang.in; then
+        enable_languages="${enable_languages},c++"
+      else
+        AC_MSG_ERROR([bootstrapping requires c++ sources])
+      fi
+      ;;
+  esac
+
   # First scan to see if an enabled language requires some other language.
   # We assume that a given config-lang.in will list all the language
   # front ends it requires, even if some are required indirectly.
@@ -1753,22 +1882,24 @@ if test -d ${srcdir}/gcc; then
           exit 1
         fi
 
-	if test "$language" = "c++" \
-	   && test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
+	if test "$language" = "c++"; then
 	  boot_language=yes
 	fi
 
+        add_this_lang=no
         case ,${enable_languages}, in
           *,${language},*)
-            # Language was explicitly selected; include it.
-            add_this_lang=yes
+            # Language was explicitly selected; include it
+	    # unless it is C, which is enabled by default.
+	    if test "$language" != "c"; then
+	      add_this_lang=yes
+	    fi
             ;;
           *,all,*)
             # 'all' was selected, select it if it is a default language
-            add_this_lang=${build_by_default}
-            ;;
-          *)
-            add_this_lang=no
+	    if test "$language" != "c"; then
+	      add_this_lang=${build_by_default}
+	    fi
             ;;
         esac
 
@@ -1937,6 +2068,14 @@ case ,${enable_languages},:${enable_objc_gc} in
     ;;
 esac
 
+# Disable libitm, libsanitizer, libvtv if we're not building C++
+case ,${enable_languages}, in
+  *,c++,*) ;;
+  *)
+    noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer target-libvtv"
+    ;;
+esac
+
 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
 # $build_configdirs and $target_configdirs.
 # If we have the source for $noconfigdirs entries, add them to $notsupp.
@@ -1976,27 +2115,6 @@ for dir in . $skipdirs $noconfigdirs ; do
   fi
 done
 
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries.  In that case, we don't want to build target-libiberty.
-# Don't let libgcc imply libiberty either.
-if test -n "${target_configdirs}" ; then
-  libgcc=
-  others=
-  for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
-    if test "$i" = "libgcc"; then
-      libgcc=target-libgcc
-    elif test "$i" != "libiberty" ; then
-      if test -r $srcdir/$i/configure ; then
-	others=yes;
-	break;
-      fi
-    fi
-  done
-  if test -z "${others}" ; then
-    target_configdirs=$libgcc
-  fi
-fi
-
 # Quietly strip out all directories which aren't configurable in this tree.
 # This relies on all configurable subdirectories being autoconfiscated, which
 # is now the case.
@@ -2102,11 +2220,11 @@ if test "x$CFLAGS_FOR_TARGET" = x; then
   CFLAGS_FOR_TARGET=$CFLAGS
   case " $CFLAGS " in
     *" -O2 "*) ;;
-    *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;;
+    *) CFLAGS_FOR_TARGET="-O2 $CFLAGS_FOR_TARGET" ;;
   esac
   case " $CFLAGS " in
     *" -g "* | *" -g3 "*) ;;
-    *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;;
+    *) CFLAGS_FOR_TARGET="-g $CFLAGS_FOR_TARGET" ;;
   esac
 fi
 AC_SUBST(CFLAGS_FOR_TARGET)
@@ -2115,15 +2233,17 @@ if test "x$CXXFLAGS_FOR_TARGET" = x; then
   CXXFLAGS_FOR_TARGET=$CXXFLAGS
   case " $CXXFLAGS " in
     *" -O2 "*) ;;
-    *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;;
+    *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS_FOR_TARGET" ;;
   esac
   case " $CXXFLAGS " in
     *" -g "* | *" -g3 "*) ;;
-    *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;;
+    *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS_FOR_TARGET" ;;
   esac
 fi
 AC_SUBST(CXXFLAGS_FOR_TARGET)
 
+AC_SUBST(LDFLAGS_FOR_TARGET)
+
 # Handle --with-headers=XXX.  If the value is not "yes", the contents of
 # the named directory are copied to $(tooldir)/sys-include.
 if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
@@ -2252,7 +2372,7 @@ case "${target}" in
   spu-*-*)
     target_makefile_frag="config/mt-spu"
     ;;
-  mips*-sde-elf*)
+  mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
     target_makefile_frag="config/mt-sde"
     ;;
   mipsisa*-*-elfoabi*)
@@ -2261,6 +2381,9 @@ case "${target}" in
   mips*-*-*linux* | mips*-*-gnu*)
     target_makefile_frag="config/mt-mips-gnu"
     ;;
+  nios2-*-elf*)
+    target_makefile_frag="config/mt-nios2-elf"
+    ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     target_makefile_frag="config/mt-gnu"
     ;;
@@ -2271,10 +2394,6 @@ case "${target}" in
     extra_arflags_for_target=" -X32_64"
     extra_nmflags_for_target=" -B -X32_64"
     ;;
-  *-*-darwin[[3-9]]*)
-    # ranlib before Darwin10 requires the -c flag to look at common symbols.
-    extra_ranlibflags_for_target=" -c"
-    ;;
 esac
 
 alphaieee_frag=/dev/null
@@ -2307,26 +2426,6 @@ case "${enable_target_optspace}:${target}" in
     ;;
 esac
 
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
-  case "${target}" in
-  mips*-*-irix[[56]]*)
-    ;;
-  mips*-*-* | alpha*-*-osf*)
-    with_stabs=yes;
-    extra_host_args="${extra_host_args} --with-stabs"
-    ;;
-  esac
-fi
-
-# hpux11 in 64bit mode has libraries in a weird place.  Arrange to find
-# them automatically.
-case "${host}" in
-  hppa*64*-*-hpux11*)	
-    extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
-    ;;
-esac
-
 # Some systems (e.g., one of the i386-aix systems the gas testers are
 # using) don't handle "\$" correctly, so don't use it here.
 tooldir='${exec_prefix}'/${target_noncanonical}
@@ -2370,34 +2469,6 @@ case $we_are_ok in
 esac
 rm -f conftest*
 
-# The Solaris /usr/ucb/cc compiler does not appear to work.
-case "${host}" in
-  sparc-sun-solaris2*)
-      CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
-      if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then
-          could_use=
-          test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
-          if test -d /opt/cygnus/bin ; then
-              if test "$could_use" = "" ; then
-                  could_use="/opt/cygnus/bin"
-              else
-                  could_use="$could_use or /opt/cygnus/bin"
-              fi
-          fi
-        if test "$could_use" = "" ; then
-            echo "Warning: compilation may fail because you're using"
-            echo "/usr/ucb/cc.  You should change your PATH or CC "
-            echo "variable and rerun configure."
-        else
-            echo "Warning: compilation may fail because you're using"
-            echo "/usr/ucb/cc, when you should use the C compiler from"
-            echo "$could_use.  You should change your"
-            echo "PATH or CC variable and rerun configure."
-        fi
-      fi
-  ;;
-esac
-
 # Decide which environment variable is used to find dynamic libraries.
 case "${host}" in
   *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
@@ -2415,16 +2486,90 @@ else
   GCC_SHLIB_SUBDIR=
 fi
 
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case $enable_bootstrap in
+  yes)
+    bootstrap_suffix=bootstrap
+    BUILD_CONFIG=bootstrap-debug
+    ;;
+  no)
+    bootstrap_suffix=no-bootstrap
+    BUILD_CONFIG=
+    ;;
+esac
+
+AC_MSG_CHECKING(for default BUILD_CONFIG)
+
+AC_ARG_WITH([build-config],
+  [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
+		  [use config/NAME.mk build configuration])],
+  [case $with_build_config in
+   yes) with_build_config= ;;
+   no) with_build_config= BUILD_CONFIG= ;;
+   esac])
+
+if test "x${with_build_config}" != x; then
+  BUILD_CONFIG=$with_build_config
+else
+  case $BUILD_CONFIG in
+  bootstrap-debug)
+    if echo "int f (void) { return 0; }" > conftest.c &&
+       ${CC} -c conftest.c &&
+       mv conftest.o conftest.o.g0 &&
+       ${CC} -c -g conftest.c &&
+       mv conftest.o conftest.o.g &&
+       ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
+      :
+    else
+      BUILD_CONFIG=
+    fi
+    rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
+    ;;
+  esac
+fi
+AC_MSG_RESULT($BUILD_CONFIG)
+AC_SUBST(BUILD_CONFIG)
+
+# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
+AC_MSG_CHECKING([for --enable-vtable-verify])
+AC_ARG_ENABLE(vtable-verify,
+[  --enable-vtable-verify    Enable vtable verification feature ],
+[case "$enableval" in
+ yes) enable_vtable_verify=yes ;;
+ no)  enable_vtable_verify=no ;;
+ *)   enable_vtable_verify=no;;
+ esac],
+[enable_vtable_verify=no])
+AC_MSG_RESULT($enable_vtable_verify)
+
 # Record target_configdirs and the configure arguments for target and
 # build configuration in Makefile.
 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
 build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+bootstrap_fixincludes=no
 
 # If we are building libgomp, bootstrap it.
 if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
   bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
 fi
 
+# If we are building libsanitizer and $BUILD_CONFIG contains bootstrap-asan
+# or bootstrap-ubsan, bootstrap it.
+if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
+  case "$BUILD_CONFIG" in
+    *bootstrap-asan* | *bootstrap-ubsan* )
+      bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+      bootstrap_fixincludes=yes
+      ;;
+  esac
+fi
+
+# If we are building libvtv and --enable-vtable-verify, bootstrap it.
+if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 &&
+   test "$enable_vtable_verify" != no; then
+  bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
+fi
+
 # Determine whether gdb needs tk/tcl or not.
 # Use 'maybe' since enable_gdbtk might be true even if tk isn't available
 # and in that case we want gdb to be built without tk.  Ugh!
@@ -2467,55 +2612,6 @@ INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 # 99 commands in a script, for HP-UX sed.
 # Do not nest @if/@endif pairs, because configure will not warn you at all.
 
-AC_ARG_ENABLE([bootstrap],
-[AS_HELP_STRING([--enable-bootstrap],
-		[enable bootstrapping @<:@yes if native build@:>@])],,
-enable_bootstrap=default)
-
-# Issue errors and warnings for invalid/strange bootstrap combinations.
-case "$configdirs" in
-  *gcc*) have_compiler=yes ;;
-  *) have_compiler=no ;;
-esac
-
-case "$have_compiler:$host:$target:$enable_bootstrap" in
-  *:*:*:no) ;;
-
-  # Default behavior.  Enable bootstrap if we have a compiler
-  # and we are in a native configuration.
-  yes:$build:$build:default)
-    enable_bootstrap=yes ;;
-
-  *:*:*:default)
-    enable_bootstrap=no ;;
-
-  # We have a compiler and we are in a native configuration, bootstrap is ok
-  yes:$build:$build:yes)
-    ;;
-
-  # Other configurations, but we have a compiler.  Assume the user knows
-  # what he's doing.
-  yes:*:*:yes)
-    AC_MSG_WARN([trying to bootstrap a cross compiler])
-    ;;
-
-  # No compiler: if they passed --enable-bootstrap explicitly, fail
-  no:*:*:yes)
-    AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
-
-  # Fail if wrong command line
-  *)
-    AC_MSG_ERROR([invalid option for --enable-bootstrap])
-    ;;
-esac
-
-case ",$enable_languages,:$ENABLE_BUILD_WITH_CXX:$enable_bootstrap" in
-  *,c++,*:yes:yes) ;;
-  *:yes:yes)
-    AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx requires c++ in --enable-languages])
-    ;;
-esac
-
 case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
   yes:yes:*\ gold\ *:*,c++,*) ;;
   yes:yes:*\ gold\ *:*)
@@ -2523,50 +2619,6 @@ case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
     ;;
 esac
 
-# Adjust the toplevel makefile according to whether bootstrap was selected.
-case $enable_bootstrap in
-  yes)
-    bootstrap_suffix=bootstrap
-    BUILD_CONFIG=bootstrap-debug
-    ;;
-  no)
-    bootstrap_suffix=no-bootstrap
-    BUILD_CONFIG=
-    ;;
-esac
-
-AC_MSG_CHECKING(for default BUILD_CONFIG)
-
-AC_ARG_WITH([build-config],
-  [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
-		  [use config/NAME.mk build configuration])],
-  [case $with_build_config in
-   yes) with_build_config= ;;
-   no) with_build_config= BUILD_CONFIG= ;;
-   esac])
-
-if test "x${with_build_config}" != x; then
-  BUILD_CONFIG=$with_build_config
-else
-  case $BUILD_CONFIG in
-  bootstrap-debug)
-    if echo "int f (void) { return 0; }" > conftest.c &&
-       ${CC} -c conftest.c &&
-       mv conftest.o conftest.o.g0 &&
-       ${CC} -c -g conftest.c &&
-       mv conftest.o conftest.o.g &&
-       ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
-      :
-    else
-      BUILD_CONFIG=
-    fi
-    rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
-    ;;
-  esac
-fi
-AC_MSG_RESULT($BUILD_CONFIG)
-AC_SUBST(BUILD_CONFIG)
-
 extrasub_build=
 for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
@@ -2590,11 +2642,15 @@ for module in ${configdirs} ; do
       fi
     done
   fi
+  case ${module},${bootstrap_fixincludes} in
+    fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
+    *) host_bootstrap_suffix=$bootstrap_suffix ;;
+  esac
   extrasub_host="$extrasub_host
 /^@if $module\$/d
 /^@endif $module\$/d
-/^@if $module-$bootstrap_suffix\$/d
-/^@endif $module-$bootstrap_suffix\$/d"
+/^@if $module-$host_bootstrap_suffix\$/d
+/^@endif $module-$host_bootstrap_suffix\$/d"
 done
 extrasub_target=
 for module in ${target_configdirs} ; do
@@ -2737,7 +2793,7 @@ changequote(,)
 changequote([,])
 
     case $lib in
-    mpc | mpfr | gmp | ppl | cloog)
+    mpc | mpfr | gmp | cloog)
       # If we're processing --with-$lib, --with-$lib-include or
       # --with-$lib-lib, for one of the libs above, and target is
       # different from host, don't pass the current argument to any
@@ -2861,6 +2917,26 @@ if test x${is_cross_compiler} = xyes ; then
   target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
 fi
 
+# Special user-friendly check for native x86_64-linux build, if
+# multilib is not explicitly enabled.
+case "$target:$have_compiler:$host:$target:$enable_multilib" in
+  x86_64-*linux*:yes:$build:$build:)
+    # Make sure we have a developement environment that handles 32-bit
+    dev64=no
+    echo "int main () { return 0; }" > conftest.c
+    ${CC} -m32 -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+    if test $? = 0 ; then
+      if test -s conftest || test -s conftest.exe ; then
+	dev64=yes
+      fi
+    fi 
+    rm -f conftest*
+    if test x${dev64} != xyes ; then
+      AC_MSG_ERROR([I suspect your system does not have 32-bit developement libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib.])
+    fi
+    ;;
+esac
+
 # Default to --enable-multilib.
 if test x${enable_multilib} = x ; then
   target_configargs="--enable-multilib ${target_configargs}"
@@ -2893,7 +2969,7 @@ case " $target_configdirs " in
   *" --with-newlib "*)
    case "$target" in
     *-cygwin*)
-      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include'
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
       ;;
    esac
 
@@ -3124,6 +3200,7 @@ NCN_STRICT_CHECK_TOOLS(WINDRES, windres)
 NCN_STRICT_CHECK_TOOLS(WINDMC, windmc)
 NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
 NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
+NCN_STRICT_CHECK_TOOLS(READELF, readelf)
 AC_SUBST(CC)
 AC_SUBST(CXX)
 AC_SUBST(CFLAGS)
@@ -3157,6 +3234,7 @@ ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo)
 ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
 ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
 ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
+ACX_CHECK_INSTALLED_TARGET_TOOL(READELF_FOR_TARGET, readelf)
 ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
 ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
 ACX_CHECK_INSTALLED_TARGET_TOOL(WINDMC_FOR_TARGET, windmc)
@@ -3168,10 +3246,10 @@ GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new])
 GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
 dnl see comments for CXX_FOR_TARGET_FLAG_TO_PASS
 GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
-		[gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+		[gcc/xg++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs],
 		c++)
 GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
-		[gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+		[gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs],
 		c++)
 GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool])
 GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
@@ -3186,6 +3264,7 @@ GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
 GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
 GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
 GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
+GCC_TARGET_TOOL(readelf, READELF_FOR_TARGET, READELF, [binutils/readelf])
 GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
 GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
 GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc])
@@ -3251,26 +3330,6 @@ case $build in
     esac ;;
 esac
 
-# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
-if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then
-  saved_CFLAGS="$CFLAGS"
-
-  # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
-  CFLAGS="$CFLAGS -fkeep-inline-functions"
-  AC_MSG_CHECKING([whether -fkeep-inline-functions is supported])
-  AC_TRY_COMPILE([
-#if (__GNUC__ < 3) \
-    || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \
-			  || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1)))
-#error http://gcc.gnu.org/PR29382
-#endif
-    ],,
-    [AC_MSG_RESULT([yes]); stage1_cflags="$stage1_cflags -fkeep-inline-functions"],
-    [AC_MSG_RESULT([no])])
-
-  CFLAGS="$saved_CFLAGS"
-fi
-
 AC_SUBST(stage1_cflags)
 
 # Enable --enable-checking in stage1 of the compiler.
@@ -3300,15 +3359,20 @@ case ${enable_werror} in
 esac
 AC_SUBST(stage2_werror_flag)
 
+# Enable --enable-host-shared.
+AC_ARG_ENABLE(host-shared,
+[AS_HELP_STRING([--enable-host-shared],
+		[build host code as shared libraries])],
+[host_shared=$enableval], [host_shared=no])
+AC_SUBST(host_shared)
+
 # Specify what files to not compare during bootstrap.
 
 compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
 case "$target" in
   hppa*64*-*-hpux*) ;;
   hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;;
-esac
-case " $configdirs " in
-*" ppl "*) compare_exclusions="$compare_exclusions | ppl/src/ppl-config.o" ;;
+  powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
 esac
 AC_SUBST(compare_exclusions)