X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configure;h=87677bc2169f9dda29db68a358857fd802771066;hb=d3e6fef0b3be9cc4fad68494068e32da77acd5e0;hp=1c9e5cb6c24f3530a46c01a7c4c7d3cb4eea4c53;hpb=730af8ee0203fc0061f0adbb501f8e773f738aab;p=platform%2Fupstream%2Fbinutils.git

diff --git a/configure b/configure
index 1c9e5cb..87677bc 100755
--- a/configure
+++ b/configure
@@ -2971,7 +2971,8 @@ case "${ENABLE_GOLD}" in
     if test "$is_elf" = "yes"; then
       # Check for target supported by gold.
       case "${target}" in
-        i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* | tilegx*-*-*)
+        i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
+        | aarch64*-*-* | tilegx*-*-*)
 	  configdirs="$configdirs gold"
 	  if test x${ENABLE_GOLD} = xdefault; then
 	    default_ld=gold
@@ -3603,6 +3604,10 @@ case "${target}" in
     ;;
   *-*-rtems*)
     noconfigdirs="$noconfigdirs target-libgloss"
+    # this is not caught below because this stanza matches earlier
+    case $target in
+      or1k*-*-*) noconfigdirs="$noconfigdirs gdb" ;;
+    esac
     ;;
     # The tpf target doesn't support gdb yet.
   *-*-tpf*)
@@ -3778,7 +3783,7 @@ case "${target}" in
   microblaze*)
     noconfigdirs="$noconfigdirs gprof"
     ;;
-  mips*-sde-elf* | mips*-mti-elf*)
+  mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
     if test x$with_newlib = xyes; then
       noconfigdirs="$noconfigdirs gprof"
     fi
@@ -3801,6 +3806,12 @@ case "${target}" in
   mips*-*-*)
     noconfigdirs="$noconfigdirs gprof"
     ;;
+  nds32*-*-*)
+    noconfigdirs="$noconfigdirs gdb"
+    ;;
+  or1k*-*-*)
+    noconfigdirs="$noconfigdirs gdb"
+    ;;
   sh-*-* | sh64-*-*)
     case "${target}" in
       sh*-*-elf)
@@ -6983,7 +6994,7 @@ case "${target}" in
   spu-*-*)
     target_makefile_frag="config/mt-spu"
     ;;
-  mips*-sde-elf* | mips*-mti-elf*)
+  mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
     target_makefile_frag="config/mt-sde"
     ;;
   mipsisa*-*-elfoabi*)
@@ -6992,6 +7003,9 @@ case "${target}" in
   mips*-*-*linux* | mips*-*-gnu*)
     target_makefile_frag="config/mt-mips-gnu"
     ;;
+  nios2-*-elf*)
+    target_makefile_frag="config/mt-nios2-elf"
+    ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     target_makefile_frag="config/mt-gnu"
     ;;
@@ -7163,6 +7177,7 @@ $as_echo "$enable_vtable_verify" >&6; }
 # build configuration in Makefile.
 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
 build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+bootstrap_fixincludes=no
 
 # If we are building libgomp, bootstrap it.
 if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
@@ -7175,6 +7190,7 @@ if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
   case "$BUILD_CONFIG" in
     *bootstrap-asan* | *bootstrap-ubsan* )
       bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+      bootstrap_fixincludes=yes
       ;;
   esac
 fi
@@ -7257,11 +7273,15 @@ for module in ${configdirs} ; do
       fi
     done
   fi
+  case ${module},${bootstrap_fixincludes} in
+    fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
+    *) host_bootstrap_suffix=$bootstrap_suffix ;;
+  esac
   extrasub_host="$extrasub_host
 /^@if $module\$/d
 /^@endif $module\$/d
-/^@if $module-$bootstrap_suffix\$/d
-/^@endif $module-$bootstrap_suffix\$/d"
+/^@if $module-$host_bootstrap_suffix\$/d
+/^@endif $module-$host_bootstrap_suffix\$/d"
 done
 extrasub_target=
 for module in ${target_configdirs} ; do