X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fpm9263_defconfig;h=ceb7efe5031bff43141399abfeb453369aac824c;hb=2fe88d452268d61b5ca9cb0b1dda2974cc43faeb;hp=d25b7a8315fac6318a0fd5dfeaf56b7bdaa69561;hpb=5abc1a4523a5509ce37bc3ec818b660a48f4eafd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig
index d25b7a8..ceb7efe 100644
--- a/configs/pm9263_defconfig
+++ b/configs/pm9263_defconfig
@@ -1,31 +1,34 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0
 CONFIG_TARGET_PM9263=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
-CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 "
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
+# CONFIG_AUTO_COMPLETE is not set
 CONFIG_SYS_PROMPT="u-boot-pm9263> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_JFFS2=y
+CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)"
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
@@ -33,14 +36,18 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_DM_SERIAL=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
-CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y