X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls2088ardb_qspi_defconfig;h=5014eb4a46b48c6432095ca8058c582f949dea9a;hb=ca8a329a1b7f3195ee56fee4c0906ee883383dfa;hp=2e4a2872ac86fa99402e3c586d15f455d738211e;hpb=970bf8603b877e2b66170290f751f9c23c120838;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig
index 2e4a287..5014eb4 100644
--- a/configs/ls2088ardb_qspi_defconfig
+++ b/configs/ls2088ardb_qspi_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_SYS_TEXT_BASE=0x20100000
@@ -10,19 +11,31 @@ CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi"
 CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv"
+CONFIG_VOL_MONITOR_IR36021_READ=y
+CONFIG_VOL_MONITOR_IR36021_SET=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
+CONFIG_ENV_ADDR=0x20300000
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_F is not set
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
+CONFIG_SPL_MAX_SIZE=0x16000
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
@@ -34,19 +47,22 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_ADDR=0x20300000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="DPMAC1@xgmii"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133333333
+CONFIG_DIMM_SLOTS_PER_CTLR=2
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_EARLY_INIT=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
@@ -55,6 +71,7 @@ CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
@@ -65,7 +82,7 @@ CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_FSL_LS_MDIO=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_SCSI=y