X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls2088ardb_qspi_SECURE_BOOT_defconfig;h=eba1d02e8b3b37a5091aeafa69d96e489bcb7618;hb=c56289ddafce3d1ec442fb18064f136c2c47d0bb;hp=3c436ab548eac545bb1fd77b914bac1be5e735a3;hpb=2ffa0e87df3a7595f71d05782924ee83146d9fe7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
index 3c436ab..eba1d02 100644
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@@ -1,25 +1,38 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS2080ARDB=y
-CONFIG_SYS_TEXT_BASE=0x20100000
+CONFIG_TEXT_BASE=0x20100000
 CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi"
-CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_AHCI=y
+CONFIG_NXP_ESBC=y
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv"
+CONFIG_VOL_MONITOR_IR36021_READ=y
+CONFIG_VOL_MONITOR_IR36021_SET=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
 # CONFIG_SYS_MALLOC_F is not set
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
@@ -30,16 +43,21 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="DPMAC1@xgmii"
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_DDR_CLK_FREQ=133333333
+CONFIG_DIMM_SLOTS_PER_CTLR=2
+CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_SYS_FSL_DDR_INTLV_256B=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_EARLY_INIT=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
@@ -48,17 +66,17 @@ CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
 CONFIG_CORTINA_FW_ADDR=0x980000
-CONFIG_DM_ETH=y
-CONFIG_DM_MDIO=y
+CONFIG_FSL_MEMAC=y
+CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y
 CONFIG_E1000=y
 CONFIG_MII=y
-CONFIG_FSL_LS_MDIO=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_SCSI=y