X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls2088ardb_qspi_SECURE_BOOT_defconfig;h=1972fc908f54536d049cdadb61af14bccc58d0a3;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=540a9ee7ccb35fbb616f75c8205df6e884b9a2a6;hpb=909d2120e27964a9cfdc8d254cd8fa5a0e1345a7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
index 540a9ee..1972fc9 100644
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@@ -1,21 +1,24 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_SYS_TEXT_BASE=0x20100000
 CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi"
+CONFIG_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_AHCI=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_VID=y
 CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv"
 CONFIG_VOL_MONITOR_IR36021_READ=y
 CONFIG_VOL_MONITOR_IR36021_SET=y
-CONFIG_FSL_LS_PPA=y
-CONFIG_QSPI_AHB_INIT=y
-CONFIG_AHCI=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
@@ -28,6 +31,8 @@ CONFIG_BOOTDELAY=10
 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
 CONFIG_RESET_PHY_R=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
@@ -51,6 +56,7 @@ CONFIG_DDR_CLK_FREQ=133333333
 CONFIG_DIMM_SLOTS_PER_CTLR=2
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_SYS_FSL_DDR_INTLV_256B=y
 CONFIG_MPC8XXX_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_EARLY_INIT=y
@@ -66,6 +72,8 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
 CONFIG_CORTINA_FW_ADDR=0x980000
+CONFIG_FSL_MEMAC=y
+CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_E1000=y