X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1088ardb_sdcard_qspi_defconfig;h=eba206dd7bba3a06b358a9e9fc87f485891344e0;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=a0c5d97ac5c13aa7d15fa6670d71d379a210b950;hpb=d274f922467ea20fdb517d68737a8af431a03fce;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig
index a0c5d97..eba206d 100644
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@@ -6,26 +6,29 @@ CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
 CONFIG_SPL_TEXT_BASE=0x1800a000
-CONFIG_FSL_USE_PCA9547_MUX=y
-CONFIG_VID=y
-CONFIG_SPL_VID=y
-CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv"
-CONFIG_VOL_MONITOR_LTC3882_READ=y
-CONFIG_VOL_MONITOR_LTC3882_SET=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_AHCI=y
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_SPL_VID=y
+CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv"
+CONFIG_VOL_MONITOR_LTC3882_READ=y
+CONFIG_VOL_MONITOR_LTC3882_SET=y
+CONFIG_FSL_QIXIS=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
@@ -39,11 +42,22 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
+CONFIG_SPL_MAX_SIZE=0x16000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80100000
+CONFIG_SPL_BSS_MAX_SIZE=0x100000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x18009ff0
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
@@ -61,6 +75,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="DPMAC1@xgmii"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA=y
@@ -84,6 +100,8 @@ CONFIG_SPI_FLASH_SPANSION=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_VITESSE=y
+CONFIG_FSL_MEMAC=y
+CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y