X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1088aqds_sdcard_qspi_defconfig;h=1bd83af1018964c4245bae02b6ed30c7dba1eea6;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=21385a9118da9737ddd26b8a24600968d7b8a8ec;hpb=6146cd62aedc4849fec66f10ab0aa57f1dc64b8e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig
index 21385a9..1bd83af 100644
--- a/configs/ls1088aqds_sdcard_qspi_defconfig
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@@ -6,27 +6,31 @@ CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
 CONFIG_SPL_TEXT_BASE=0x1800a000
-CONFIG_FSL_USE_PCA9547_MUX=y
-CONFIG_VID=y
-CONFIG_SPL_VID=y
-CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv"
-CONFIG_VOL_MONITOR_LTC3882_READ=y
-CONFIG_VOL_MONITOR_LTC3882_SET=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_AHCI=y
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_SPL_VID=y
+CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv"
+CONFIG_VOL_MONITOR_LTC3882_READ=y
+CONFIG_VOL_MONITOR_LTC3882_SET=y
+CONFIG_FSL_QIXIS=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
 # CONFIG_SYS_MALLOC_F is not set
+CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -37,11 +41,22 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_RESET_PHY_R=y
+CONFIG_SPL_MAX_SIZE=0x16000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80100000
+CONFIG_SPL_BSS_MAX_SIZE=0x100000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x18009ff0
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
@@ -58,8 +73,11 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="DPMAC1@xgmii"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_DDR_ECC=y
@@ -68,6 +86,7 @@ CONFIG_MPC8XXX_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
+CONFIG_ESDHC_DETECT_QUIRK=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
@@ -84,10 +103,12 @@ CONFIG_PHYLIB_10G=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_TERANETICS=y
 CONFIG_PHY_VITESSE=y
+CONFIG_FSL_MEMAC=y
+CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y