X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1088aqds_qspi_defconfig;h=71fdea4b58b73d438595ca4fa8868fdbe748b32f;hb=f76750d1113380462413bad94d7a400af1aa4909;hp=3649b06a754c3fc120ddd8e44c07a7f9d9c108f3;hpb=0b23b0d9f969c4a587cb9ee75905d6f6f9d1d2ea;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig
index 3649b06..71fdea4 100644
--- a/configs/ls1088aqds_qspi_defconfig
+++ b/configs/ls1088aqds_qspi_defconfig
@@ -1,53 +1,81 @@
 CONFIG_ARM=y
+CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS1088AQDS=y
 CONFIG_SYS_TEXT_BASE=0x20100000
+CONFIG_SYS_MALLOC_LEN=0x202000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x300000
+CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
-CONFIG_NR_DRAM_BANKS=2
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
+CONFIG_QSPI_BOOT=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_ENV_ADDR=0x20300000
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
-CONFIG_DM_MMC=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
+CONFIG_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
+CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHYLIB_10G=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_TERANETICS=y
+CONFIG_PHY_VITESSE=y
+CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
+CONFIG_NVME=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
@@ -55,9 +83,7 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_GADGET=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y