X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1046aqds_sdcard_qspi_defconfig;h=68aae882a8078d2f2e119ef56c43782dd99e67b6;hb=319d309b58f863cbb8dcb240ace6af17dc98939b;hp=291ca2ff7465b5dba77b0653e6c084c9fe6172ab;hpb=6edb5dd388c749f03ec649ac6be98844abe0ea4f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index 291ca2f..68aae88 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -1,12 +1,11 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_LEN=0x102000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_SYS_I2C_MXC_I2C1=y
@@ -16,18 +15,27 @@ CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
 CONFIG_SPL_TEXT_BASE=0x10000000
-CONFIG_FSL_USE_PCA9547_MUX=y
-CONFIG_VID=y
-CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv"
-CONFIG_VOL_MONITOR_INA220=y
-CONFIG_VOL_MONITOR_IR36021_SET=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_AHCI=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv"
+CONFIG_VOL_MONITOR_INA220=y
+CONFIG_VOL_MONITOR_IR36021_SET=y
+CONFIG_FSL_QIXIS=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
@@ -42,15 +50,26 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:2m(uboot),14m(free)"
 CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;;"
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x1f000
+CONFIG_SPL_PAD_TO=0x21000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x8f000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x10020000
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -95,7 +114,7 @@ CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_SYS_FMAN_FW_ADDR=0x900000
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y