X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1046aqds_lpuart_defconfig;h=a75a523f54f3bbd0258a541db0635918bc1e01a5;hb=b641dd3ec8dc3f6b18d2fa945ac3ab597063d191;hp=0ca38ce19527f747f7072fa4dc9aefdb1be39f5c;hpb=86cf1c82850f7c226f23684e19616e526ffaf10f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index 0ca38ce..a75a523 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -1,10 +1,13 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_SYS_TEXT_BASE=0x60100000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DM_GPIO=y
 CONFIG_FSL_LS_PPA=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart"
-CONFIG_DISTRO_DEFAULTS=y
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
@@ -12,6 +15,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
 # CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
@@ -22,25 +26,39 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart"
 CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_ADDR=0x60300000
 CONFIG_DM=y
+CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
-CONFIG_SPI_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_PHYLIB=y
-CONFIG_NETDEVICES=y
+CONFIG_PHYLIB_10G=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
+CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_SPI=y
@@ -50,4 +68,4 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y